The document specifies the requirements for a flow nozzle for a boiler including:
- The medium is superheated steam from the main steam line of Boiler I.
- The flow rates are 105,000 kg/hr maximum, 78,000 kg/hr normal, and 10,500 kg/hr minimum.
- The operating temperature is 505±5 degrees and operating pressure is 72 kg/cm2 with a design pressure of 85 kg/cm2.
The document specifies the requirements for a flow nozzle for a boiler including:
- The medium is superheated steam from the main steam line of Boiler I.
- The flow rates are 105,000 kg/hr maximum, 78,000 kg/hr normal, and 10,500 kg/hr minimum.
- The operating temperature is 505±5 degrees and operating pressure is 72 kg/cm2 with a design pressure of 85 kg/cm2.
The document specifies the requirements for a flow nozzle for a boiler including:
- The medium is superheated steam from the main steam line of Boiler I.
- The flow rates are 105,000 kg/hr maximum, 78,000 kg/hr normal, and 10,500 kg/hr minimum.
- The operating temperature is 505±5 degrees and operating pressure is 72 kg/cm2 with a design pressure of 85 kg/cm2.
S. No. Description Specification 1 Medium Super heated steam (Boiler- I Main steam line) 2 Flow 105000 kg/hr Max 78000 kg/hr Nor 10500 kg/hr Min 3 Operating temperature 505 ± 5 DEG 4 Operating pressure 72 Kg/cm² 5 Design pressure 85 Kg/cm² 6 Differential pressure 0-10,000 mmwc 7 Material of construction SS 316 8 End connection of pipe Butt welded 9 Test IBR 10 Line size 200 NB SCH 120 11 Material of pipe SA335 P22 12 Design code BS1042/Equl 15 NB (Socket weld) 2 pair of tappings to be provided. In this I 13 Transmitter tapping size should be plugged with suitable material. 14 Quantity 1 No. 15 Tag No 1FE 103 16 Make Note: Supplier to confirm the differential pressure will be sufficient. 1 This flow measuring device should be in a position to measure flow at 20% flow accurately 2 as signals are being taken for some controls. SUPPLIER TO FURNISH THE FOLLOWING WITH OFFER 1 Permanent pressure drop across nozzle. 2 Tapping detail 3 GA drawing with dimensional details 4 Q vs H curve (with temp. compensation curves) 5 Technical data sheet DOCUMENTS REQUIRED FROM SUPPLIER 1 Test certificate 2 IBR certificate 3 6 sets of O & M manual