Professional Documents
Culture Documents
The Rogers CLTE-MW is a ceramic-filled PTFE composite laminate that is reinforced using woven glass for
that extra durability. These features give this laminate enough efficiency to handle 5G plus other wave
applications. In addition, it has several features and properties that make it unique and special. But is this
laminate worth trying out? And if so, which other features does it bring to the table?
Table of Contents
Rogers CLTE-MW laminates offer PCB assemblers a cost-effective, high-performance material. They bear
electrical and physical constraints, making them great for applications with thickness limitations. What’s
more, this laminate comes in seven different thickness options. You can choose from a thickness of 3 – 10
mils according to your project’s requirements. With this thickness feature, you get that ideal and perfect
signal to ground spacing which is essential for 5G transmission.
The Rogers CLTE-MW laminate has woven glass reinforcement and a fillers loading that is pretty high.
These two features help the laminate propagate electromagnet waves efficiently. They also improve the
laminate’s durability and stability, making it one of a kind.
The Rogers CLTE-MW laminates have a pretty low moisture absorption rate of about 0.03%. Due to this
feature, you get optimal performance from this laminate over a wide range of application environments.
The Rogers CLTE-MW laminates are also great in terms of thermal conductivity. Their thermal conductivity
stands at 0.42 W/mK, which allows heat dissipation to take place aggressively. The laminate also has a
higher dielectric strength when you compare it to other laminates. Its dielectric strength hits a whooping 630
V/mil. You can hence ensures that an excellent z-axis insulation exists between the conductor layers.
The Rogers CLTE-MW laminate has a flammability rating of UL94 V-0. You can hence utilize this laminate
for commercial applications.
Other features and benefits that make the Rogers CLTE-MW one of
a kind
The Rogers CLTE-MW laminate has a low Z, X, and Y-axis CTE. Its mechanical performance is hence
reliable even when put in an environment that is thermally challenging.
The Rogers CLTE-MW laminate has a loss tangent that is pretty low; this reduces circuit losses, improving
the PCB’s efficiency.
The Rogers CLTE-MW laminate has some unique properties that make it stand out. These properties
include:
Electrical properties
When it comes to PCB laminates, electrical properties are a great factor to consider. These properties bring
out a component’s ability to conduct electricity.
Dielectric constant
When you place the Rogers CLTE-MW laminate under a temperature of 230C, a bandwidth of 10GHz, and
an RH of 50%, the dielectric constant hits:
If you switch up the test conditions and replace the 10 GHz bandwidth with a bandwidth within 8 – 40 GHz.
And then switch the temperature and RH test conditions with the C-24/23/50 test conditions, you get the
following dielectric constant:
Dissipation factor
When you place the Rogers CLTE-MW laminate under a temperature of 230C, a bandwidth of 10GHz, and
an RH of 50%, you get the following dissipation factor:
0.0015
The thermal coefficient of dielectric constant of the Rogers CLTE-MW laminate is:
– 35 ppm/0C
Volume resistivity
The volume resistivity of the Rogers CLTE-MW laminate under the C-96/35/90 test conditions is:
Surface resistivity
The Rogers CLTE-MW laminate bears the following volume resistivity when you place it under the
C-96/35/90 test conditions:
Electrical strength
The Rogers CLTE-MW laminate has the following electrical strength under normal conditions:
6.30 V/mil
Dielectric breakdown
The dielectric breakdown of the Rogers CLTE-MW laminate under the D-48/50 test conditions is:
44 kV
Rogers CLTE-MW laminate has the following comparative tracking index under c-40/23/50 test conditions:
Thermal properties are also pretty crucial to consider when choosing a laminate for your PCB. You do not
want a laminate that melts off quickly when you expose it to heat.
Decomposition temperature
When you place the laminate under a temperature of 1050C for 2 hours at a weight loss of 5%, the
decomposition temperature hits 5000C.
The (X/Y) coefficient of thermal expansion of the Rogers CLTE-MW laminate is:
The Z coefficient of thermal expansion of the Rogers CLTE-MW laminate, on the other hand, is:
Delamination time
The delamination time of the Rogers CLTE-MW laminate under a temperature of 2880C is:
>60
Thermal conductivity
0.42 W/mK
PCBs are sometimes put under a lot of pressure during assembly. You hence require a laminate that is
durable under the application of force. Therefore, mechanical features are also crucial properties to consider.
After the applications of thermal stress, the copper peel strength of the Rogers CLTE-MW laminate hits:
1.1 N/mm
Flexure strength
113 MPa
To carry out this test, place the laminate under a temperature of 250C +/- 30C.
Dimensional stability
The Rogers CLTE-MW laminate has the following dimensional stability (after etching and baking)
0.22 mil
Physical properties
Moisture absorption
Rogers CLTE-MW laminate has a pretty low moisture absorption rate of:
0.03%
The specific heat capacity of the Rogers CLTE-MW laminate under C-24/23/50 test conditions is:
2.1 g/cm3
Conclusion
The Rogers CLTE-MW laminate is one of a kind. It bears special features that boost its durability, stability,
and performance. All this makes it one of the best laminates on the market today. If you are looking to utilize
this laminate in your project, we assure you that it will not disappoint.
Related Posts:
https://www.raypcb.com/rogers-clte-mw-pcb/