Professional Documents
Culture Documents
1. Trade mark: ILM, MOGEEN, MOZONG, WOSEN, VINZ, WESTT, STEALTH, BIKE IT, A-PRO,
JDC, GDM, NHH, SHIRO, HLS, PRO YOU, X-EAR, XTRONG, CORSA, NEX RACING, EOLE,
KSK, KHI, R52 HELEMTS, RS2 HELMETS, STR, KFC, M, MCDONALDS, IS KSPRES, 288,
FRANK THOMAS, NITRO, G-MAC, AKITO, TEX, SWAY, APRO, AVX, JFM, HNJ, HPN GARI,
ZEBRA, NAVA ZR1, YANGO, DELI, BHR, JEBS, STING, NOX, TORX, TC, XRC, SHIRO,
ZPF, KRAIN, MAXXE,R HELMETS, NVG, STROMER, CRN,SPYDER,NEO, PROANTI,
SOMAN, ORTHRUS HELEMTS, HAX HELMET, JBZ, SWAP’S
2. Type: WS-202
5. Address: Floor 4, Workshop 7, No.25 Jinxing Avenue Longyou Economic Development Zone
Mohuan Township, Longyou County Quzhou City, Zhejiang Provice P.R.China
UK
EAB602185 Approval
An executive agency of the Department for Transport Authority
December 2022 Revision 3
Page 1 of 3 28-Jun-23
E11*22R06/02*0980*00
9. Helmet without lower face cover (J) / with protective lower face cover (P) / with non protective
lower face cover (NP) / with detachable or movable lower face cover (P/J) (1)
11. Brief description of visor or visors and inner visor if any: See Manufacturer’s documentation
12. Helmet ready for specific accessory (SA) / ready for universal accessories (UA) Not applicable
13. Accessories included in the helmet homologation and functionality: Not applicable
14. If UA helmet, speakers (S or S45) / Microphone (M) / Front mounting (F) / Side mounting (L),
Rear mounting (R) (1) Not applicable
16. Technical service responsible for conducting approval tests: OMEGA S.r.l.
23. Signature:
C McCABE
Chief Technical and Statutory Operations Officer
UK
EAB602185 Approval
An executive agency of the Department for Transport Authority
December 2022 Revision 3
Page 2 of 3 28-Jun-23
E11*22R06/02*0980*00
21. The following documents, bearing the approval number shown above, are available on
request:
UK
EAB602185 Approval
An executive agency of the Department for Transport Authority
December 2022 Revision 3
Page 3 of 3 28-Jun-23
THE UNITED KINGDOM VEHICLE APPROVAL AUTHORITY
UK
EAB602185 Approval
An executive agency of the Department for Transport Authority
July 2021 Revision 2
Page 1 of 1 28-Jun-23
INFORMATION DOCUMENT
No.: R22-WS-202-00
TYPE: WS-202
Regulation No. 22
Total Page: 18
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 2 of 18
0 GENERAL INFORMATION
0.1 Make (trade name of manufacturer) : ILM, MOGEEN, MOZONG, WOSEN, VINZ, WESTT,
STEALTH, BIKE IT, A-PRO, JDC, GDM, NHH,
SHIRO, HLS, PRO YOU, X-EAR, XTRONG, CORSA,
NEX RACING, EOLE, KSK, KHI, R52 HELEMTS,
RS2 HELMETS, STR, KFC, M, MCDONALDS, IS
KSPRES, 288, FRANK THOMAS, NITRO, G-MAC,
AKITO, TEX, SWAY, APRO, AVX, JFM, HNJ, HPN
GARI, ZEBRA, NAVA ZR1, YANGO, DELI, BHR,
JEBS, STING, NOX, TORX, TC, XRC, SHIRO, ZPF,
KRAIN, MAXXE,R HELMETS, NVG, STROMER,
CRN,SPYDER,NEO, PROANTI, SOMAN,
ORTHRUS HELEMTS, HAX HELMET, JBZ, SWAP’S
0.2 Type : WS-202
0.2.1 Commercial description(s) : WS-202
0.3 Variants / Versions : N.A.
0.4 Name and address of manufacturer : Zhejiang Watson Sports Goods Co., Ltd.
Floor 4, Workshop 7, No.25 Jinxing Avenue
Longyou Economic Development Zone Mohuan
Township, Longyou County Quzhou City,
Zhejiang Provice P.R.China
0.5 Name and address of assembly plant : Zhejiang Watson Sports Goods Co., Ltd.
Floor 4, Workshop 7, No.25 Jinxing Avenue
Longyou Economic Development Zone Mohuan
Township, Longyou County Quzhou City,
Zhejiang Provice P.R.China
0.6 Name and address of manufacturer’s : n.a.
authorized representative (if any)
0.7 Location and method of affixing of the : Marked in a label sewn on the retention system,
international approval mark see Annex 6
1 TECHNICAL DESCRIPTION
1.1 Description of the helmet
1.1.1 Type of helmet : Full face
1.1.2 Type of lower face cover : “P” protective
1.1.3 Size (s) (cm) : XS(53/54), S(55/56), M(57/58), L(59/60),
XL(60/61),
1.1.4 Drawing of the helmet : See Annex 1
1.1.5 Type(s) of visor to which may be : WS-202V
equipped with this helmet
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 4 of 18
ANNEXS
Annex 1 Drawing of the helmet
Annex 2 Drawing of the visor and sun shade
Annex 3 Drawing of the shell
Annex 4 Drawing of the protective padding
Annex 5 Drawing of the comfort padding
Annex 6 Drawing of the retention system
Annex 7 Information for wearer
Annex 8 Examples of Marking
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 5 of 18
2 Visor PC 9 Spoiler PC
Sun Visor
3 Sun Visor PC 10 Switch Gear POM
Sun visor
4 Mouth Vent ABS 11 POM
switch
Mouth Vent Protective
5 PVC 12 EPS
Switch padding
Comfort Compound
6 Chin ABS 13 Padding sponge and cloth
7 Bottom trim PVC
Description WS-202 Helmet Code No.: WS-202.0
Drawn by: Li Chunhong Checked by: Li Chunhong Approved by: Miao biyou
Date: 06.06.2023 Date: 06.06.2023 Date: 06.06.2023
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 6 of 18
wood fiber
3 Pinlock cellulose
material
Description WS-202V Code No.: WS-202.V
Drawn by: Li Chunhong Checked by: Li Chunhong Approved by: Miao biyou
Date: 06.06.2023 Date: 06.06.2023 Date: 06.06.2023
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 7 of 18
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 8 of 18
Unit:mm
Number Name Material Number Name Material
1 Shell ABS
Description Shell Code No.: WS-202.0
Drawn by: Li Chunhong Checked by: Li Chunhong Approved by: Miao biyou
Date: 06.06.2023 Date: 06.06.2023 Date: 06.06.2023
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 9 of 18
Unit:mm
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 10 of 18
Unit:mm
Number Name Material Number Name Material
Medium Main
1 EPS
Protective Padding
Description Padding
WS-202 Protective Padding Code No.: WS-202.4.0
Drawn by: Li Chunhong Checked by: Li Chunhong Approved by: Miao biyou
Date: 06.06.2023 Date: 06.06.2023 Date: 06.06.2023
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 11 of 18
Unit:mm
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 12 of 18
Unit:mm
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 13 of 18
Unit:mm
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 14 of 18
Unit:mm
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 15 of 18
Drawn by: Li Chunhong Checked by: Li Chunhong Approved by: Miao biyou
Date: 06.06.2023 Date: 06.06.2023 Date: 06.06.2023
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 16 of 18
Unit:mm
Number Name Material Number Name Material
Quick Release Polycarbonate
1 ECE Marking Cloth 4
Buckle + Steel
2 Chin Strap Nylon 5 “B” Ring Steel
3 Hinge Steel
Description Retention System Code No.: WS-202.6
Drawn by: Li Chunhong Checked by: Li Chunhong Approved by: Miao biyou
Date: 06.06.2023 Date: 06.06.2023 Date: 06.06.2023
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 17 of 18
WARNING
No helmet can protect the user from all possible and foreseeable impacts.
1. For adequate protection, this helmet must fit closely and be securely attached. Any helmet
that has sustained a violent impact should be replaced.
2. Visors (if fitted) with the marking indicating "daytime use only" are not suitable for use during the
hours of darkness or in conditions of poor visibility. The fastening of visor is such that it may not be
possible to remove it instantly from the line of sight with one hand should an emergency (such as
headlamp glare or misting) occur.
3. To maintain the full efficiency of the helmet, any modification to the structure of the helmet or its
parts is not allowed.
4. Do not apply paint, stickers, petrol or other solvents to this helmet. Hydrocarbons, cleaning fluids,
paints, transfers or other extraneous additions will affect the shell material adversely.
Shell is made by injection method using acrylonitrile butadiene styrene and polycarbonate blending
thermoplastic. Lining is made of expanded polystyrene.
Important: read helmet user’s guide for additional information prior to using your new helmet.
Warning! It is dangerous to use the helmet in the way of riding with open protective chin bar.
WARNING
1. TO CLEAN THE VISOR USE HOUSEHOLD WINDOW CLEANER AND A LINT FREE TOWEL
ONLY. CAUSTIC CHEMICALS OR SOLVENT MUST NOT BE USED.
2. BEFORE CLEANING VISOR, BE SURE TO BRUSH AWAY ANY LARGE PIECES OF DIRT.
3. VISORS OR SUN SHADE WITH THE MARKING "DAYTIME USE ONLY" ARE NOT SUITABLE
FOR USE DURING THE HOURS OF DARKNESS OR IN CONDITIONS OF POOR VISIBILITY.
4. THE SUN SHADE SHALL ONLY BE USED IN COMBINATION WITH THE VISOR IN
CLOSED POSITION TO ENSURE THE MECHANICAL PROTECTION OF THE EYES.
UK
Approval
Authority
28-Jun-23
INFORMATION DOCUMENT R22-WS-202-00
Type : WS-202 Date: 06.06.2023
Manufacture : Zhejiang Watson Sports Goods Co., Ltd. Page 18 of 18
UK
Approval
Authority
28-Jun-23
QUALIFICATION TESTING
UNECE n°22 Series 06
Job Number EAB602185
Code: Watson WS-202 E06 Helmet Qualification 20230608
Report
Date: 08/06/2023
Name:Zhejiang Watson Sports Goods Co., Ltd.
Manufacturer Address: Floor 4, Workshop 7, No.25 Jinxing Avenue Longyou Economic
Development Zone Mohuan Township, Longyou County Quzhou City,
Zhejiang Province P.R.China
Representative [it does not apply]
Helmet model: WS-202
Approval n°: E11*22R06/02*0980*00
Sample
Stickers from n°: 1 to n°: 3200 Batch n°: 1
Arrival date: 25/05/2023 Testing date: 05/06/2023
The Helmet has been tested in the different configurations as supplied by the client.
UK
Approval
Authority
Job Number: [EAB602185] M09 rev.1 22042020
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA s.r.l. 28-Jun-23
Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China 1/7
The helmets are divided in n° 4 batches
Group n° Size helmets
1 The largest size XL 10
2 The largest size XL 10
3 The smallest size XS 10
Standard deviation S= (g i − gm ) / 9
2
1
2
9
UK
Approval
Authority
Job Number: [EAB602185] M09 rev.1 22042020
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA s.r.l. 28-Jun-23
Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China 2/7
Group n°1 XL (60-61)
Standard deviation S= (g i − gm ) / 9
2
1
2
5
Standard deviation S= (g i − gm ) / 9
2
1
2
8
UK
Approval
Authority
Job Number: [EAB602185] M09 rev.1 22042020
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA s.r.l. 28-Jun-23
Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China 3/7
Group n°2 XL (60-61)
Standard deviation S= (g i − gm ) / 9
2
1
2
7
Standard deviation S= (g i − gm ) / 9
2
1
2
36
UK
Approval
Authority
Job Number: [EAB602185] M09 rev.1 22042020
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA s.r.l. 28-Jun-23
Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China 4/7
RETENTION SYSTEM STRENGTH Ref. 7.6
Standard deviation S 1 1
Condition Xm + 2,4·S 33 18
UK
Approval
Authority
Job Number: [EAB602185] M09 rev.1 22042020
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA s.r.l. 28-Jun-23
Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China 5/7
INFORMATION FOR WEARERS Ref. 14
LABELLING
Ref. Requirement Description or image
Method of Attachment to helmet at point
of sale
UK
Approval
Authority
Job Number: [EAB602185] M09 rev.1 22042020
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA s.r.l. 28-Jun-23
Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China 6/7
MARKING
Ref. Requirement Description or image
Method of Marking to the helmet
4.1.1 the applicant's trade name or mark,
END OF REPORT
UK
Approval
Authority
Job Number: [EAB602185] M09 rev.1 22042020
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA s.r.l. 28-Jun-23
Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China 7/7
TYPE APPROVAL TESTING
UNECE n°22 Series 06
Job Number [EAB602185]
Code: Watson WS-202 E2206 Helmet Approval 20230525
Report
Date: 25/05/2023
Name: Zhejiang Watson Sports Goods Co., Ltd.
The Helmet has been tested in the different configurations as supplied by the client.
UK
Job Number: [EAB602185] Approval
M81 rev.0 11112020
Authority
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA
ITALY: Strada Comunale Savonesa n.9 / 15057 Tortona (AL) / Italy / Tel. 0039-0131-860220 / VAT 01828300069 1/9
28-Jun-23
CHINA: Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China
HELMET IMAGES
Front Side 1
Side 2 Rear
UK
Job Number: [EAB602185] Approval
M81 rev.0 11112020
Authority
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA
ITALY: Strada Comunale Savonesa n.9 / 15057 Tortona (AL) / Italy / Tel. 0039-0131-860220 / VAT 01828300069 2/9
28-Jun-23
CHINA: Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China
GENERAL SPECIFICATION TEST
SIZES XS (53-54) S (55-56) M (57- 58) L (59-60) XL (60-61)
Result
Reference General Specification Pass Fail
(or N/A)
6.1 Hard shell Pass
6.1 Impact absorption system Pass
(see test data in this report)
6.1 Retention system Pass
6.2.2 Marked “Does not protect chin from impacts” (if applicable) N/A
6.4.1 Extent of protection Pass
6.4.2 Nape cylinder Pass
6.4.3 Protective padding Pass
6.5 Outer round surface – Auditive faculties Pass
6.6 Projections (≥ 2 mm) Pass
6.7 External Projections Pass
(h ≤ 2 mm – r ≥ 1 mm); (h ≥ 2mm – r ≥ 2mm)
6.8 Helmet interior Pass
6.9 Assembly Pass
6.10 Chin strap abrasion Pass
6.11 - 6.11.1 Retention system – Chin strap width (≥ 20 mm) Pass
6.11.2 Under-chin Pass
6.11.3 Chin strap regulation system Pass
6.11.4 Rigid parts Pass
6.11.5 Buckle – “Double D” or “Roller buckle” N/A
6.11.6 Pulling flap (red 10 x 20mm) N/A
6.11.7 Quick release (general requirement) Pass
6.11.8 Quick release (tests par. 7.3, 7.6, 7.7) Pass
6.11.9 Wrong buckle use Pass
6.12 P/J helmets: device that maintains the intended position even during the N/A
complete series of impacts and retention (detaching) test (red)
6.13 Material properties (manufacturer declaration) Pass
6.14 Helmet breaking Pass
Lateral visual clearance 105° Pass
6.15, 6.15.3.1
Peripheral vision: Upward visual clearance 7° Pass
6.15.3.2 6.15.3.3
Downward visual clearance 45° Pass
6.18.2 to 6.18.6 Reflective parts (see test reports) N/A
UK
Job Number: [EAB602185] Approval
M81 rev.0 11112020
Authority
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA
ITALY: Strada Comunale Savonesa n.9 / 15057 Tortona (AL) / Italy / Tel. 0039-0131-860220 / VAT 01828300069 3/9
28-Jun-23
CHINA: Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China
SPECIFICATION
H.F. Size [54 to 60]
Impact point B / P / X / R /S Extra Point
Anvil Kerbstone / Flat
Conditioning [°C]
AMB 25 °C ± 5 °C for more than 4 hours
LOW -10 °C ± 2 °C for more than 4 hours
HIGH +50 °C ± 2 °C for more than 4 hours and less than 8 hours
UV+H2O Ultraviolet radiation by a 150-watt xenon- 48 hours
Water spray 4 to 6 hours, 1 litre per minute
Speed [m/s] 7.5 m/s + 0.15 m/s (6-0 + 0.15 m/s for the S point)
High Speed 8.2 m/s +0.15 m/s
Low Speed 6.0 m/s + 0.15 m/s
HIC ≤ 2400
High Speed ≤ 2880
Low Speed ≤ 1300
Rotational 0.78
Deceleration ≤ 275
Low Speed ≤ 180
Rotational ≤ 10400 rad/s²
UK
Job Number: [EAB602185] Approval
M81 rev.0 11112020
Authority
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA
ITALY: Strada Comunale Savonesa n.9 / 15057 Tortona (AL) / Italy / Tel. 0039-0131-860220 / VAT 01828300069 4/9
28-Jun-23
CHINA: Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China
IMPACT ABSORPTION TESTS Ref. 7.3
UK
Job Number: [EAB602185] Approval
M81 rev.0 11112020
Authority
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA
ITALY: Strada Comunale Savonesa n.9 / 15057 Tortona (AL) / Italy / Tel. 0039-0131-860220 / VAT 01828300069 5/9
28-Jun-23
CHINA: Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China
Helmet size XS (53-54)
Sticker n° Internal Id H.F. Impact Anvil Cond. Speed Deceleration HIC
Size point [°C] [m/s] ≤ 275 [g] ≤ 2400
UK
Job Number: [EAB602185] Approval
M81 rev.0 11112020
Authority
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA
ITALY: Strada Comunale Savonesa n.9 / 15057 Tortona (AL) / Italy / Tel. 0039-0131-860220 / VAT 01828300069 6/9
28-Jun-23
CHINA: Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China
LOW ENERGY IMPACT TESTS Ref. 7.3 & 7.3.1.4
UK
Job Number: [EAB602185] Approval
M81 rev.0 11112020
Authority
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA
ITALY: Strada Comunale Savonesa n.9 / 15057 Tortona (AL) / Italy / Tel. 0039-0131-860220 / VAT 01828300069 7/9
28-Jun-23
CHINA: Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China
DYNAMIC TEST OF THE RETENTION SYSTEM Ref. 7.6
REFLECTIVE PARTS
Result
Reference Test Pass Fail
or N/A
6.16.2 Reflective parts (Geometry requirements) N/A
6.16.3 Reflective parts (Colorimetric requirements) N/A
6.16.4 Reflective parts (Photometric requirements) N/A
6.16.5 Reflective parts (Resistance to external agents requirements) N/A
6.16.6 Reflective parts (Compatibility of materials requirements) N/A
END OF REPORT
UK
Job Number: [EAB602185] Approval
M81 rev.0 11112020
Authority
This report concerns only the tested samples and it cannot be partially reproduced without prior written permission from OMEGA
ITALY: Strada Comunale Savonesa n.9 / 15057 Tortona (AL) / Italy / Tel. 0039-0131-860220 / VAT 01828300069 9/9
28-Jun-23
CHINA: Room 103, No.455-3, Second Ring South Road | Tong’an District, Xiamen, Fujian, 361100 | China
VCA Declaration of Proper
Omega Annex 4 Rev. 1
Procedures
TYPE: WS-202
The undersigned confirms that the tests conducted under the above job number have
been carried out in accordance with the requirements of the specified
Regulation/Directive and the Licence between OMEGA S.R.L. and VCA relating to type
approval testing.
The undersigned has not been involved in any design nor development work on the
products to be approved nor, any related product.
SIGNED:
UK
Approval
Authority