Professional Documents
Culture Documents
Clarification furnished by
Ref. Cl. Clarification points raised
APTransco as corrigendum
Eligibility criteria- we request you to kindly confirm that will As per specification
clause (1) of sec-I you consider the supplies made to Joint
Venture companies such as BSES for pre-
qualification. BSES has 51% stake of
Reliance and 49% is of Govt of Delhi.
5.0 Technical May also consider accepting credentials Performances of battery
requirements available for integrated DCDB chargers with inbuilt
DCDB will also be
considered.
Section IV Request for a maximum of 3 locations for As per specification
delivery
5.0 Technical 220 V 100 AH DC multifunction meter
requirements (10 A FC/ 20 A FCBC) charger: should be provided with
According to Market standard there is No RS-485 with single line
manufacturer have 2 Line display. So, we display.
will provide DC multifunction meter with
RS-485 with single line display.
5.0 Technical 220 V 100 AH MCCB/MCB shall be
requirements (10 A FC/ 20 A FCBC) charger: mounted inside Battery
For previous order we done the same. Chargers Panels.
However during inspection , they changed
the flush mounted into inside of the
charger. Same as we need clarification.
5.0 Technical 220 V 400 AH Either HMI display as per
requirements (60 A FC/ 100 A FCBC) charger: specification (or) TFT
Instead of HMI display we will provide display with Manual/Auto
TFT display additional with AC & DC mode selector switch,
Multifunction meters and TFT display VRLA/Tubular mode
only display the parameters can’t able to selector switch and
control charger function. FC/FCBC selector switch
shall be provided.
5.0 Technical For DCDB panels
requirements We can perform and submit the report As per the specification
during Supply – Degree of protection test
as per IEC60529 –IP42.
Sd/-
Chief Engineer/Transmission