Professional Documents
Culture Documents
Name and Address of employer for whom the thorough examination was Address of premises at which the
ARMOUR ROCK CONTRACTING examination was made:
UAE.
AL REEM ISLAND , ABU DHABI, UAE
Inspection Procedure.:MSC/TM/10 Standard Ref.: BS EN13157:2004+A1:2009
Identification of any part found to have a defect which is or could become a danger to persons and a description of the defect::
(If none state NONE)
NONE
Is the above a defect which is of immediate danger to persons
YES NO
Is the above a defect which is not yet but could become a danger to persons:
(If YES state the date by when) YES by:
Particulars of any repair, renewal or alteration required to remedy the defect identified above:
NONE
Particulars of any tests carried out as part of the examination: (If none state NONE)
Visual & Functional Examination
Equipment’s / tools used : MSC-E-02 , MSC-E-07
IS THIS EQUIPMENT FIT FOR PURPOSE? YES NO
Name & Qualifications of person making Name of person authenticating this report: Latest date by which next thorough
this report: Sahat Nawaz Signature: examination must be carried out:
07-02-2023
MASTER SAFETY CONSULTANCY LLC, P. O. BOX 92198, MUSSAFAH M-10, ABU DHABI –UAE, TEL: 02-5535560, FAX: 02-5535562
EXAMINATION CHECKLIST
Inspection Details of Lifting Gear Chain Block
Status : S = Satisfactory X = Deficiency R = Recommendation N = Not Applicable
Sr. No. Inspection Item Status Sr. No. Inspection Item Status
1 General Condition S 15 Chain wheel in one piece S
2 Guarding Cover S 16 Hook cracks/ deformities S
3 Hook S 17 Hook latches crack/ deformities S
4 Chain Wheel S 18 Sharpness around the welds S
5 Link Chain S 19 Hook throat opening S
6 Load chain S 20 Chain wear S
7 Load chain wheel S 21 Chain twist S
8 Anchorage of the Load Chain S 22 Handling, Installation & Fastening S
10 Safety latches S 23 Load sprocket wear S
11 Top hook swivelling for correct positioning S 24 Hand chain wheel wear S
12 Automatic breaking function of lever hoist S 26 Spring ratchet S
13 Regular descent of breaking device S 27 Spring S
14 Breaking function when operating force S 28 S
ceases Shafts
Remarks