Professional Documents
Culture Documents
Multi Checklist
Multi Checklist
SL NO CHECK ITEMS Y N
SL NO CHECK ITEMS Y N
SL NO CHECK ITEMS Y N
4
Check the wire sling connections on the Kelly Bar for loose or
damaged U bolts and broken wires.
5
No oil leak in hydraulic parts.
6
Kelly Movement and working condition (damage, crack and jamming
while extending).
7 Working condition of the Emergency Lever in the Operator Cabin.
8 Wire ropes shall be free from Damages (No Kinks and broken wires).
13
Operator should pose a valid license.
Comments If any:
SL NO CHECK ITEMS Y N
4 D.B box connected with the machine is equipped with MGB and ELGB.
Emergency switch is available in working condition ( Front side and back side of
5
the m/c)
6 Power on & off switch with indicator light are available in working condition.
8 No oil leakage
10
Limit switch (Both Side,below the job plate) are in working condition
SL NO CHECK ITEMS Y N
7 Condition of radiator
8 Wire rope/sling of the hopper fixed with the guide only by 'D' clamp.
9 Condition of belt
11 Condition of chain
13 Ensure barricading on both sides of the hopper when the machine in operation
Comments If any:
SL NO CHECK ITEMS Y N
4 Oil leakage from the hydraulic cylinder and from the diesel tank.
10 Operator license.
Comments If any:
SL NO CHECK ITEMS Y N
6
Weight of the extinguisher (Should be match with actual weight
written in the body)
7 Availability of visual board.
8 All the indicator gages (where fitted) in green segment (not to be red)
SL NO CHECK ITEMS Y N
4 No oil leakage from the oil tank & other parts of the m/c.
In case of mobile gen set, confirmation of inbuilt acoustic system. (If sound
14
is more than 85 dB)
Comments If any:
SL NO CHECK ITEMS Y N
5 Safe means of access (steps, grab bars, non-slip surfaces) to the cab is provided
15 Visualization of Check sheet and Operator details with photo in the vehicle itself.
Comments If any:
10 3
4
5
9
7
1
10
6
2
SL NO CHECK ITEMS Y N
The cherry picker movement/ work area is leveled ,compacted and free from all
9
obstructions
Comments If any:
2
5
1 7 4 3
SL NO CHECK ITEMS Y N
2 4
3 8
9 14
5 7
1
6
15
13
SL NO CHECK ITEMS
1 Firm Base with grouting & Easily accessable panel (height of the leg is equal to 1m)
4 Visualization of voltage, current and type of tools to be used in the socket & Panel.
Comments If any:
Y N
Signature of site engine
CHECK LIST FOR DRILLING MACHINE
4
3
6
7 4
Y N
SL NO CHECK ITEMS
SL NO CHECK ITEMS Y N
Comments If any:
SL NO CHECK ITEMS Y N
6 Tyre condition
2 1
1
4
4
5 5
6
3 7 8 8 6 7 2
3
SL NO CHECK ITEMS Y N
7
1
10
4
5
6 3
SL NO CHECK ITEMS Y N
9
2
1
3 4 0
16
6
4
4
1
15 0
20 21 22
Extension 1
Ladder 14
10 8
SL NO CHECK ITEMS Y N
1 All the rungs, cleats, or steps are in good condition (Broken,missing,bend rungs)
2 Side rails is intact without any cracks, bends, or breaks.
3 The rungs, cleats, or steps is fit into the side rails without damage.
4 Ladder is free from corrosion.
5 Side rails and steps are free of oil or grease.
6 Rungs are placed at regular intervals (30 cm gap between two rungs)
7 Projection of loose nails, screws, bolts, or other metal parts
8 At the time of using, the ladder should be placed at 65-75 degree angle (1:4 ratio)
9 Ladder is extended at least 1 m above the landing platform (3 Rungs)
10 Ladder is secured either at top or at the bottom
11 Ladder rungs should not be painted.
12 Reinforcement rod should not be used as ladder rungs
13 The surface of the rungs should not be smooth
14 Rubber feet for firm grip (in case of Aluminum ladder)
Comments If any:
2
1
8 10
11
3
9
6
SL NO CHECK ITEMS Y N
5 Wire rope and slings free from tolerable damage( No kinks, broken wires more than 10% is N.G).
3 10
8
6
5 7
SL NO CHECK ITEMS Y N
10 No cracks in windscreen
12 Signal man
Comments If any:
11
SL NO CHECK ITEMS Y N
4 Wire rope and slings free from tolerable damage( No kinks, broken wires more than 10% is N.G).
9 Boom structure condition while full expansion (damage, crack and jamming while extending).
Level adjustment
4 is in good working
condition
Access lader to
the platform is
5 with out any
defects,missing
rungs.
Availability of limit
6 switch for the
platform extension
Mechanical stoper
7 for the platform
lifter is in
3
All wheels are in
good
Comments If any: