Professional Documents
Culture Documents
Issue 03
Date 2020-01-14
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Website: https://www.huawei.com
Email: support@huawei.com
Preface
Personnel Requirements
Engineers that are responsible for installing and maintaining Huawei equipment must be
trained, and have a thorough understanding of the proper operation methods and safety
precautions.
Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol Description
Symbol Description
Human Safety
Do not look into the optical port without eye protection.
When drilling holes, take proper protection measures to avoid inhaling dust and prevent dust
from hurting your eyes.
When working at heights, take proper measures to prevent objects from falling down.
Change History
Issue Date Description
Contents
Preface................................................................................................................................................ii
1 Installation Preparation................................................................................................................1
1.1 Appearance.....................................................................................................................................................................1
1.2 Tools...............................................................................................................................................................................2
1.3 Installation Accessory.....................................................................................................................................................2
1.4 Installation Process.........................................................................................................................................................4
1 Installation Preparation
1.1 Appearance
SSC2811-SM-9U
SSC2811-SM-8
The installation steps and methods of SSC2811-SM-8 and SSC2811-SM-9U are the same, this guide
takes the SSC2811-SM-9U as an example.
1.2 Tools
Marker Drill bit (φ6 mm) Hammer drill
1. Put away materials that are not used during the installation for future use.
2. Put away components that are removed during the installation and protect them against
contamination.
3. Clean the required parts or components before the installation.
2.1 Wall-mounting
Step 1 Mark installation positions by using the closure and a marker.
Step 2 Drill holes and install plastic plugs in the specified area on the wall.
----End
2.2 Pole-mounting
Step 1 Install the metal cable storing bracket to the closure.
When installing the cable storing bracket, ensure that the opening faces outwards.
Step 2 Install the hose clamps on the mounting hole of the metal cable storing bracket.
Step 3 Secure the hose clamps on the pole, and tighten the screws.
Step 4 Insert the FastConnect cable into the closure and coil the redundant cable in the metal cable
storing bracket, use 2 long cable ties to secure the cable to the cable storing bracket.
When an optical cable is coiled upwards, the minimum bending diameter D1 must be 20 times
greater than the outer diameter of the cable.
Maximum lengths supported by the cable storing bracket: Φ5 mm, 50 m.
For details about how to insert a FastConnect cable into the closure, see 3 Installing the FastConnect
Cable.
----End
2.3 Aerial-mounting
Step 1 Install the brackets to the closure.
Step 3 Hang the closure onto the cable, and then fasten the screws.
----End
The FastConnect cables installed at the input end and output end of the closure are the same, and the
installation steps are the same.
Step 1 Remove the dust cap from the adapter by rotating the dust cap of the adapter from the 1
position to the 0 position.
Step 2 Remove the dust caps from the FastConnect cable connector and the ferrule.
Step 3 Align the gap with the arrow by rotating the part marked with an arrow counterclockwise.
Step 4 Connect the FastConnect cable to the closure, and rotate the connector from the 0 position to
the 1 position.
Step 5 Connect the dust caps of the FastConnect cable connector and adapter.
----End
4 Post-installation Check
No. Item