Professional Documents
Culture Documents
اواپراتورهای هوایی
3
Specification of
Evaporators
مشخصات اواپراتورها
Nomenclature
EvaporAtors
NES1-135-13
کد فنی Technical Code
model(NES)
Standard
model (neu)
Upright
model(Ned)
Double coil
model (NEC)
Ceiling
selection of
OF
evaporators
شاخص های انتخاب
of gases like R134a, R404a it is b) 6mm fin spacing for below zero باالی صفر و یا پیش سردکن و عمل )KW( الف) بار برودتی به کیلو وات
possible to use Fr table contents. chambers and freezed packaged .آوری ب) شرایط و خواص محصول
For this purpose, factors mentioned products. مناسب برای: 6mm ج) ابعاد سالن سردخانه و نسبت گردش ب) فاصله فین
in Fr table will be multiplied in c) 8mm fin spacing is used for سالنهای نگهداری زیر صفر و محصوالت هوا
required capacity. conditions that chamber tempera- .بسته بندی شده منجمد د) تعیین فاصله فین
ture is between -25°C to -40°C مناسب برای: 8mm ج) فاصله فین ه) موقعیت استقرار اواپراتور
روش انتخاب اواپراتور with high humidity. محیطهای نگهداری با درجه حرارت و) اختالف دمای تبخیر و دمای
d) 12mm fin spacing for the first و سالن های نگهداری-40°C تا-25°C )Dt1(اتاق
Qn=Qr*Fsc*Fr
.با رطوبت باال ز) نوع تغذیه مبرد
)KW( ظرفیت اسمی کولر: Qn time in Iran, Novin Ref. Co. make
)KW( ظرفیت مورد نیاز: Qr it available to produce coiles with شرکت نوین: 12mm د) فاصله فین
ضریب تصحیح نوع مبرد(جدول: Fsc 12 mm fin spacing for freezing برای نخستین بار در ایران این امکان را Selection
)Fsc humid cold rooms. بوجود آورده که کویل هایی با فاصله فین Specifications
ضریب تصحیح نوع مبرد(جدول: Fr جهت تونل های انجماد سریع و12mm a) Refrigeration load in (KW)
)Fr
توان اسمی . یا سالن های مرطوب و سرد تولید نمایدb) Product requirements and
ظرفیت برودتی اسمی اواپراتورها طبق specification
)°C( دمای اتاق: Tr
تحتR22 برای گازENV 328 c) Storage room dimentions and air
)°C( دمای تبخیر: Te
شرایط استاندارد زیر اندازه گیری و در Fin Spacing circulations
اختالف دمای تبخیر و دمای: DT1
.جدول مشخصات فنی قید گردیده اند Selection d) Fin spacing
)K( اتاق به درجه کلوین
در صورت استفاده از مبردهای دیگرIt is one of the most important points e) Air unit location
)Fr( از جدولR404a, R134a نظیرin choosing Evaporators. The proper f) Difference between evaporating
Evaporator برای این منظور. می توان استفاده کردfin spacing in the evaporator depends temp. and room temp. (Dt1)
Selection ) درFr( ضرایب موجود در جدولon operating parameters such as g) Type of refrigerant feeding
Qn = Qr * Fsc * Fr ) ضرب خواهندQr( ظرفیت مورد نیازevaporating temp. ,difference between
Qn : Nominal capacity of . شدchamber temp. and evaporating temp. تعیین فاصله فین
evaporator (KW) , the humidity of products , time of یکی از نکات مهم در انتخاب اواپراتورها
Qr : Required capacity (KW) Nominal defrost and ambient humidity. فاصله فین مناسب در یک.می باشد
Fsc : Capacity correction factor (SC Capacity It is recommended to notice to the اواپراتور به پارامترهای عملیاتی آن نظیر
tables) according to ENV328, the nominal following notes in choosing the fin اختالف درجه حرارت سالن،دمای تبخیر
Fr : Refrigerant factor (Fr table) capacity of Evaporators for R22 spacing: زمان، رطوبت محصول،و دمای تبخیر
Tr : Room temperature (°C) are measured under the following a) 4.2mm fin spacing is used for .دیفراست و رطوبت محیط بستگی دارد
Te : Evaporating temperature (°C) standard conditions and are speci- conditions that chamber temprature is توصیه می شود در انتخاب فاصله فین به
DT1 : Difference between evaporat- fied in technical data tables. between 10°C to -5°C or precooling :نکات زیر توجه کنید
ing temperature and room temp. (K) In case of using other type and processing. مناسب برای: 4.2mm الف) فاصله فین
برای سالنهای+10°C تا-5 °C دمای
11
Standard Table
Eurovent Standard Air Inlent Temp. °C Evaporating Temp. °C Humidity
SC1 +10 0 85%
SC2 0 -8 85%
SC3 -18 -25 95%
Fr table
Refrigerant Eurovent Condition Correction factor (Fr)
R404A SC1/SC2/SC3 1.05
R134a SC1/SC2 0.97
R22 SC1/SC2/SC3 1.00
Fcs : (capacity correction factors)
()ضریب تصحیح ظرفیت
DT1 Evaporation Temperature (°C)
(K) +10 +8 +6 +5 0 -2 -5
6 1.78 1.80 1.82 1.82 1.84 1.85 1.88
7 1.46 1.48 1.50 1.50 1.52 1.53 1.55
Fsc1
8 1.24 1.26 1.28 1.28 1.30 1.31 1.34
DT = 10 K
9 1.07 1.09 1.10 1.11 1.13 1.14 1.16
Te = 0 °C
10 0.94 0.96 0.98 0.98 1.00 1.01 1.02
11 0.85 0.87 0.88 0.88 0.90 0.91 0.91
12 0.77 0.78 0.79 0.79 0.81 0.81 0.82
Required capacity : Qr = 7 KW
Room temperature : Tr = +5 °C :Example
Temperature diffrence : 10K
Refrigerant: R134a
Tr = +5 °C Qn = Qr*Fsc*Fr = 7*1.02*0.97 = 6.92 (KW)
DT1 = 10K
TE = +5-10 = -5 °C (SC1)
Fsc = 1.02
Fr = 0.97