Professional Documents
Culture Documents
Class IX
Your job is to create a tin man that can sit or stand on its own using various
recycled objects. Your tin man MUST have two arms, two legs, a body, a head
and a hat.
SUPPLIES NEEDED:
● Toilet Paper Rolls/Paper Towel Rolls
● Boxes of various sizes (e.g., cereal or shoe box)
● Aluminum foil
● Scissors
● Tape
● Measuring Tape (not a ruler)
Class IX
3. Measure the dimensions of each body part and note them down in the following table:
Head
Hat
Body
Arms
Leg
To be completed in class
Body
Arms x2
Legs x2
Hat
Deductions *
Total
*Do not forget to label spots that will end up not being seen! For example, you might not see the part
where your legs attach to the body (This means you will subtract spots that will not be covered by foil).
5. Attach all the various body parts with tape or hot glue.
6. Test your tin man model. It must be sitting without or with partial support.
7. Wrap it in aluminum foil using the surface area calculated above.
8. Write a reflection of at least five sentences on how this project helps connect maths
to real life.
Assignment (Term 1)
Class IX
RUBRIC
Tin Man has all Tin man has all parts Tin man has all parts
parts attached, is attached, is standing attached, is less
Completeness partially standing or or sitting with than half covered
sitting on its own, support, and is mostly and/or does not
and is fully covered. covered. stand or sit with
support.