Professional Documents
Culture Documents
Adjustment
Adjustment
Print Exit
PROCEDURE
a. Pull the parking brake lever to fully engage the parking brake.
c. Slowly pull the parking brake lever all the way, and count the number of clicks.
Standard parking brake lever travel when pulled with a force of 200 N (20 kgf, 45 lbf):
7 to 9 clicks
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(w/ Console Box Lid)>REMOVAL
3.REMOVE REAR CONSOLE BOX SUB-ASSEMBLY (w/o Console Box Lid) 58901A
a. for 2WD:
Click hereBrake>BRAKE (REAR)>REAR BRAKE(for TMT Made 2WD)>INSTALLATION
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-j…manual/repair/contents/RM100000000KU76.html?PUB_TYPE=RM&MODE=1 Page 1 of 3
Print-Toyota Service Information 11/3/17, 10(11 pm
b.
*1 Lock Nut
*2 Adjusting Nut
c. Turn the adjusting nut until the parking brake lever travel is correct.
Standard parking brake lever travel when pulled with a force of 200 N (20 kgf, 45 lbf):
7 to 9 clicks
HINT:
If the parking brake lever travel cannot be fully adjusted with this procedure, proceed to the adjust
parking brake turn buckle procedure.
a.
*1 Lock Nut
*2 Parking Brake Turn Buckle
Loosen the lock nut and turn the parking brake turn buckle until the lever travel is correct.
Standard parking brake lever travel when pulled with a force of 200 N (20 kgf, 45 lbf):
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-…manual/repair/contents/RM100000000KU76.html?PUB_TYPE=RM&MODE=1 Page 2 of 3
Print-Toyota Service Information 11/3/17, 10(11 pm
7 to 9 clicks
a. Operate the parking brake lever and check the illumination condition of the brake warning light.
OK:
The brake warning light always illuminates at the first click.
Click hereVehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX(w/ Console Box Lid)>INSTALLATION
10.INSTALL REAR CONSOLE BOX SUB-ASSEMBLY (w/o Console Box Lid) 58901A
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-…manual/repair/contents/RM100000000KU76.html?PUB_TYPE=RM&MODE=1 Page 3 of 3