Professional Documents
Culture Documents
Valorant - Collection English
Valorant - Collection English
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
IMPORTANT:
This pattern is designed by Medaami and is for PERSONAL USE ONLY. DO NOT
duplicate, translate, re-sell or distribute this document in any shapes and forms.
Please respect and appreciate every artists’ works. We create and design amigu-
rumi patterns using our precious time and hard work.
However, you may sell the finished products as long as you have bought the
pattern, CLEARLY credit Medaami as the pattern designer, and use YOUR OWN
photos to promote them. Thank you for understanding!
medaami 2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in light gray, dark gray, black, pasel turquoise, pastel mint,
soft yellow, hot pink (optional), dark brown and dark green colour
- Crochet hook that matches the size of your yarn
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet hook.
My Kay/o turned out approximately 10cm (4”) tall.
ABBREVIATIONS
R = round/row tc = triple crochet
ch = chain inc = increase (2sc in 1 st)
st(s) = stitch(es) dec = decrease (sc in 2 st)
sc = single crochet BLO = back loop only
hdc = half double crochet sk = skip
dc = double crochet slst = slip stitch
[...] = a total of [...] stitches on that x(...) = repeat (...) times
round
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
HEAD
medaami
(light gray, pastel turquoise)
R1: 6sc in magic ring [6]
(PT) = change to pastel turquoise
R2: inc x6 [12] (LG) = change to light gray
R3: (2inc, sc) x4 [20]
R4: sc, (2inc, 3sc) x3, 2inc, 2sc [28]
R5: 2sc, (2inc, 5sc) x3, 2inc, 3sc [36]
R6: 3sc, 2inc, (PT) 7sc, (LG) 2inc, 7sc, 2inc, (PT) 7sc, (LG) 2inc, 4sc [44]
R7: 4sc, 2inc, (PT) 9sc, (LG) 2inc, 9sc, 2inc, (PT) 9sc, (LG) 2inc, (PT)
5sc [52]
R8: 5sc, (LG) 3sc, (PT) 9sc, (LG) 17sc, (PT) 9sc, (LG) 4sc, (PT) 5sc [52]
R9: sc around following each stitchs’ colour [52]
R10: 6sc, (LG) 3sc, (PT) 9sc, (LG) 17sc, (PT) 9sc, (LG) 3sc, (PT) 5sc [52]
R11: 6sc, (LG) 3sc, (PT) 9sc, (LG) 17sc, (PT) 9sc, (LG) 4sc, (PT) 4sc [52]
R12: 5sc, (LG) 47sc [52]
R13-R18: sc around (6 rounds) [52]
R19: 7sc, (2dec, 9sc) x3, 2dec, 2sc [44]
R20: 6sc, (2dec, 7sc) x3, 2dec, sc [36]
R21: 5sc, (2dec, 5sc) x3, 2dec [28]
Insert stuffing fully, but still maintaining the square shape.
R22: dec, 2sc, (2dec, 3sc) x3, dec, sc [20]
R23: (8sc, dec) x2 [18]
Slst, fasten off, weave the tail in, add more stuffing if needed.
medaami 5
© 2023 Medaami Patterns
body
(dark brown, black, navy blue)
R1: (in dark brown) 6sc in magic ring [6]
R2: inc x6 [12]
medaami
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6-R8: (change to black) sc around (3 rounds) [24]
R9: (change to navy blue) sc around [24]
R10: (dec, 2sc) x6 [18]
R11: sc around [18]
Slst, fasten off, leave a tail for sewing and stuff fully.
Optional, this won’t be too visible later:
Using pastel turquoise yarn, embroider 3 lines like
so, on the navy blue front part of the body.
arms
(black, light gray, pastel mint, navy blue)
R1: (in black) 4sc in magic ring [4]
R2: inc x4 [8] 1
R3-R4: (change to pastel mint) 2sc, (change to light gray) 4sc,
(change to pastel mint) 2sc (2 rounds) [8]
R5-R7: (change to navy blue) sc around (3 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff lightly.
medaami
R3: BLO, sc around [12]
R4: sc around [12]
R5: (change to dark brown) (dec, 4sc) x2 [10]
R6: (change to light gray) sc around [10]
R7: (change to dark brown) sc around [10]
R8: (dec, 3sc) x2 [8]
Slst, fasten off, leave a tail for sewing and
stuff firmly.
straps (make 2)
(dark brown)
Ch 13, (starting from 2nd ch from hook) 12sc [12]
Fasten off and and weave in/seal off the tails.
belt
(dark green)
R1: ch 33, slst to the first chain to connect them into
a loop.
R2: 32slst [32]
Fasten off and and weave in/seal off the tails.
medaami
of the chains and 4sc again, and now you’re working in rounds [8]
R2-R4: sc around (3 rounds) [8]
R5: sc, insert little stuffing, pinch the gap close, then close the gap
by 3sc through both layers.
Fasten off, leave a tail for sewing, or not leaving a tail and just glue
them later.
chest detail a
(pastel mint)
6sc in magic ring [6]
Fasten off and and weave in/seal off the tails.
chest detail b
(dark gray)
Ch 4, (starting from 2nd ch from hook) 3sc [3]
Fasten off and and weave in/seal off the tails.
Using hot pink yarn, embroider 2 horizontal lines on
the upper part like so
medaami
R2-R3: sc in all sts (2 rows) [5]
Continue to sc around the piece (see picture). Inc on the corners.
sc around in this
direction inc on these corners
back detail b
(dark brown)
R1: 5sc in magic ring [5]
R2: inc x5 [10]
Fasten off and and weave in/seal off the tails.
Using pastel turquoise yarn, embroider 3 lines form-
ing a circle like so:
medaami
R2: 4sc, inc, 9sc, inc, 4sc, inc, 9sc, inc [34]
Slst, fasten off and leave a tail for sewing.
medaami
R2-R4: sc around (3 rounds) [25]
Slst, fasten off and leave a tail for sewing or not leaving a tail and
just glue them later.
shoulder armor
(black)
Ch 7, (starting from 2nd ch from hook) sc, hdc, 2dc,
hdc, sc [6]
Fasten off, leave a tail for sewing. or not leaving a tail
and just glue them later.
kay/o’s face
(navy blue, light gray, dark gray)
We’re making the screen first.
R1: (in navy) ch 14, (starting from 2nd ch from hook) 13scsc, turn to
the other side of the chains and 13sc again, and now you’re working
in rounds [26]
R2: (inc, 12sc) x2 [28]
R3-R4: sc around (2 rounds) [28]
R5: sc, inc, 13sc, inc, 12sc [30]
R6: 2sc, inc, 14sc, inc, 12sc [32]
R7: 2sc, inc, 15sc, inc, 13sc [32]
R8-R14: sc around (7 rounds) [32]
R15: 5sc, dec, 15sc, dec, 10sc [30]
R16: 5sc, dec, 14sc, dec, 9sc [28]
R17: Crochet sc until your hook ended up on the side (see picture A).
Then, fold both layers, and continue to crochet through both layers:
3sc, hdc, dc, 4tc, dc, hdc, 3sc (see picture B)
© 2023 Medaami Patterns medaami 11
A B
medaami
(fold both layers) (crochet through
both layers)
Fasten off, leave a tail for sewing or not leaving a tail and just glue
them later.
We’re going to make the details on the screen:
Please take time and be patient in making the embroidery neat. I
also went through trials and errors in making the embroidery sym-
metrical.
1) Fold the upper part of the screen a little.
2) Using pastel turquoise yarn, embroider a little upside-down trian-
gle like so, in the middle of the screen and 4 rounds above the last
round.
3) Embroider a bigger upside-down triangle outside the previous tri-
angle.
4) Embroider 3 lines, one on each sides of the triangle like so.
5) Embroider 3 “v” shape, one on each corners of the triangle like so.
1 2 3
4 5 medaami 12
© 2023 Medaami Patterns
We’re making the screen’s lower part.
R1: (in light gray) ch 11, (starting from 2nd ch from hook) 10scsc, turn
to the other side of the chains and 10sc again, and now you’re work-
ing in rounds [20]
medaami
R2: sc around [20]
R3: (inc, 4sc) x4 [24]
R4: (inc, 3sc) x6 [30]
Fold both layers, and sc through both layers.
Fasten off and weave the tail in.
medaami
1 2 3
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
1. Sew the body to the head. Then, insert the body armor to the
body, with the top part below R11 of the body. I also inserted wire for
the arms (optional and not recommended for kids).
2. Sew the arms on the sides of the upper body.
3. Sew the legs on the lower body (see picture).
1 2 3
© 2023 Medaami Patterns
medaami 14
4. Attach both straps from the front flap, to the shoulders then to the
back.
5. Attach Chest Detail B on the upper part of the body armor.
6. Attach Chest Detail A below Detail B, overlapping half of Detail A.
medaami
front back
4 5 6
7. Attach Chest Detail C on the left and right chest like so:
8. Insert the belt to the body from the legs. Attach it on the waist.
9. Attach Back Detail A to the back. Then, attach Detail B on Detail A.
7 8 9
10. Attach the side pocket on the waist behind the right arm.
11. Attach the shoulder shield on the right shoulder.
12. Place one Side Case on one side of the blue square using ball-
point pins. Then, sew only the outer part..
medaami 15
10 11 12
© 2023 Medaami Patterns
13. Do the same for the other Side Case and also the Back Case.
14. Place the top part of Kay/o’s face on the front part of the face,
aproximately below R4 of the head.
15. Make sure that the face is in the middle and not too high or low.
medaami
Then, attach it in place.
13 14 15
16. Attach the side panels on each left and right sides of the head
like so:
IMPORTANT:
This pattern is designed by Medaami and is for PERSONAL USE ONLY. DO NOT
duplicate, translate, re-sell or distribute this document in any shapes and forms.
Please respect and appreciate every artists’ works. We create and design amigu-
rumi patterns using our precious time and hard work.
However, you may sell the finished products as long as you have bought the
pattern, CLEARLY credit Medaami as the pattern designer, and use YOUR OWN
photos to promote them. Thank you for understanding!
medaami 2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in tan/bronze, yellow, beige, terracotta, dark gray, light
gray, cadet blue and black colour
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use 10mm eyes)
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet hook.
My Brimstone turned out approximately 10cm (4”) tall.
ABBREVIATIONS
R = round/row tc = triple crochet
ch = chain inc = increase (2sc in 1 st)
st(s) = stitch(es) dec = decrease (sc in 2 st)
sc = single crochet BLO = back loop only
hdc = half double crochet sk = skip
dc = double crochet slst = slip stitch
[...] = a total of [...] stitches on that x(...) = repeat (...) times
round
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
HEAD
medaami
(beige)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and about 10
sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Slst, fasten off, weave the tail in, add more stuffing if needed.
collar
(cadet blue)
Left collar: ch 4, (starting from 2nd ch from
hook) 2sc, slst [3]
Right collar: ch 4, (starting from 2nd ch
left right from hook) slst, 2sc [3]
Fasten off and leave a tail for sewing, or not
leaving a tail and just glue them later.
medaami 5
© 2023 Medaami Patterns
body
(dark gray, cadet blue, beige)
R1: (in dark gray) 6sc in magic ring [6]
medaami
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6-R9: (change to cadet blue) sc around (4 rounds) [24]
R10: (dec, 2sc) x2, dec, sc, (change to beige) sc, (change to cadet
blue) (dec, 2sc) x3 [18]
R11: 8sc, (change to beige) 2sc, (change to cadet blue) 8sc [18]
Slst, fasten off, leave a tail for sewing and stuff fully.
left arm
(black, beige, cadet blue)
R1: (in black) 4sc in magic ring [4]
R2: inc x4 [8]
R3-R5: (change to beige) sc around [3 rounds) [8]
R6-R7: (change to cadet blue) sc around [2 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff lightly.
1
right arm
(black, beige, cadet blue)
R1: (in black) 4sc in magic ring [4]
R2: inc x4 [8]
R3-R4: sc around [2 rounds) [8] 2
R5: (change to beige) sc around [8]
R6-R7: (change to cadet blue) sc around (2 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff lightly.
medaami
Cut off the yarn and fasten off.
Now we’re going to make the front and back “flap”. Follow these in-
structions carefully:
1) Starting from the 4th stitch backwards from the stitch that you
fastened off, insert your hook and ch 1 to start off.
2) We’re now going to work in rows. Ch 1 and turn after each rows.
a. R4: 8sc [8]
b. R5-R6: sc in all sts [8]
3) Cut off yarn and fasten off (this is the back flap). Then, insert
your hook on the 6th stitch from the left side of the back flap (see
picture). Start off by ch 1.
4) Work in rows, ch 1 and turn after each rows.
R4: 7sc [7]
R5: sc in all sts [7]
5) Fasten off and weave in/seal off all the tails.
1 2a 2b
3 4 5
© 2023 Medaami Patterns
medaami 7
legs (make 2)
(black, dark gray)
R1: (in black) 6sc in magic ring [6]
medaami
R2: inc x6 [12]
R3: BLO, sc around [12]
R4: FLO, sc around [12]
Flip the upper part inside out to make it easier to work with (so the
back loops will show up), you’ll flip it back again after you finish
making the piece.
R5: (crochet into the back loops of R3) (change to dark gray) 5sc, sk
1 st, 5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Slst, fasten off, leave a tail for sewing and stuff firmly.
hair base
(dark gray)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9: (inc, 23sc) x2 [50]
R10-R18: sc around (9 rounds) [50]
Slst, fasten off and leave a tail for sewing.
medaami
Fasten off and and weave in/seal off the tails.
side pocket
(black)
R1: ch 5, (starting from 2nd ch from hook) 4sc, turn to the other side
of the chains and 4sc again, and now you’re working in rounds [8]
R2-R4: sc around (3 rounds) [8]
R5: sc, insert little stuffing, pinch the gap close, then close the gap
by 3sc through both layers.
Fasten off, leave a tail for sewing, or not leaving a tail and just glue
them later.
upper beard
(dark gray)
Ch 22, (starting from 2nd ch from hook) 21slst [21]
Fasten off, leave a tail for sewing. or not leaving a tail
and just glue them later.
medaami 9
© 2023 Medaami Patterns
lower beard
(dark gray)
Ch 6, (starting from 3rd ch from hook) 2hdc, dc, tc [4]
medaami
Fasten off, leave a tail for sewing. or not leaving a tail and just glue
them later.
sc around in this
direction (exclude inc on these corners
the bottom part)
medaami
hook) 2sc [2]
Fasten off, weave in/seal off the tails.
1 2 3 4
© 2023 Medaami Patterns medaami 11
back Armor accessory
(dark gray, orange, yellow)
Work in rows. Ch 1 and turn after each rows.
R1: (in dark gray) Ch 6, (starting from 2nd ch from hook) 5sc [5]
medaami
R2: dec, sc, dec [3]
R3: sc, sk 1 st, sc [2]
R4: sk 1 st, sc [1]
Fasten off, weave in/seal off the tails.
Back armor assembly:
1) Using orange yarn, embroider a triangle shape like so:
2) Using yellow yarn, embroider a smaller triangle shape inside the
orange triangle shape.
3) Weave in/seal off the tails, then attach it on the other armor.
1 2 3
hat detail
(tan/bronze, yellow)
Work in rows. Ch 1 and turn after each rows.
R1: ch 6, (starting from 2nd ch from hook) 5sc [5]
R2: dec, sc, dec [3]
R3-R4: sc in all sts (2 rows) [3]
Cut off and fasten off.
hat
medaami
(terracotta)
R1: 6sc in magic ring [6] R12-R16: sc around (5 rounds) [66]
R2: inc x6 [12] R17: (dec, 9sc) x6 [60]
R3: (inc, sc) x6 [18] R18-R24: sc around (7 rounds) [60]
R4: (2sc, inc) x6 [24] R25: (8sc, dec) x6 [54]
R5: (inc, 3sc) x6 [30] R26-R27: sc around (2 rounds) [54]
R6: (4sc, inc) x6 [36] R28: (change to black) sc around [54]
R7: (inc, 5sc) x6 [42] Slst, fasten off and weave the tail in.
R8: (6sc, inc) x6 [48]
R9: (inc, 7sc) x6 [54]
R10: (8sc, inc) x6 [60]
R11: (inc, 9sc) x6 [66]
1 2 3
medaami 13
© 2023 Medaami Patterns
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
medaami
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
1. Sew the body to the head
2. Sew the left and right collar outlining the beige area on the body
like so:
3. Insert the vest to the body but don’t attach it yet. Place the back
flap at the back and front flap at the front. Place it on top of the
body like so:
1 2 3
4. Sew the legs at the bottom of the body (see picture). Then, lower
the vest so you can see the collar area.
5. This step is optional, I inserted a wire through the upper part of the
body for the arms. (Not recommended if you make this amigurumi
for kids) (picture is just for illustration)
4 5
medaami 14
(illustration only)
© 2023 Medaami Patterns
6. Sew the arms on the sides of the body.
7. Attach 1 armor on the right shoulder, then attach the other armor
below it. Give them a little space (don’t place them too close).
8. Attach the side pocket on the left waist behind the arm.
medaami
6 7 8
9. Attach both straps from the front flap, to the shoulders then to the
back flap.
10. Attach the back armor to the back of the body.
11. Attach the chest armor to the front of the body.
9 10 11
14. Place the side beards on the side of the lower head like so:
15. Place the hat on the top of the head.
14 15
16. You can reshape the hat and make the right side pointy like so:
17. Place the hat detail on the right side of the hat.
18. (Optional) add blush on the cheeks to make him cuter (I used a
peach-coloured blush and applied it using small brush).
16 17 18
IMPORTANT:
This pattern is designed by Medaami and is for PERSONAL USE ONLY. DO NOT
duplicate, translate, re-sell or distribute this document in any shapes and forms.
Please respect and appreciate every artists’ works. We create and design amigu-
rumi patterns using our precious time and hard work.
However, you may sell the finished products as long as you have bought the
pattern, CLEARLY credit Medaami as the pattern designer, and use YOUR OWN
photos to promote them. Thank you for understanding!
medaami 2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in bud green, light green, beige, black, orange, lavender,
purple, dark gray, light gray and light blue colour
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use 10mm eyes)
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet hook.
My Gekko turned out approximately 10cm (4”) tall.
ABBREVIATIONS
R = round/row inc = increase (2sc in 1 st)
ch = chain dec = decrease (sc in 2 st)
st(s) = stitch(es) BLO = back loop only
sc = single crochet sk = skip
hdc = half double crochet slst = slip stitch
dc = double crochet x(...) = repeat (...) times
[...] = a total of [...] stitches on that
round
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
HEAD
medaami
(beige)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and about 10
sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Slst, fasten off, weave the tail in, add more stuffing if needed.
Purple detail
(purple)
Ch 8
Fasten off and weave in/seal off the tails.
orange detail
(orange)
Ch 35
medaami 5
Fasten off and weave in/seal off the tails.
© 2023 Medaami Patterns
body
(dark gray, black, beige)
R1: (in dark gray) 6sc in magic ring [6]
R2: inc x6 [12]
medaami
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6-R9: (change to black) sc around (4 rounds) [24]
R10: (dec, 2sc) x6 [18]
R11: 8sc, (change to beige) 3sc, (change to black) 7sc [18]
Slst, fasten off, leave a tail for sewing and stuff fully.
arms (make 2)
(beige, lavender, black)
R1: (in beige) 4sc in magic ring [4]
R2: (change to lavender) inc x4 [8]
R3-R5: (change to beige) sc around [3 rounds) [8]
R6-R7: (change to black) sc around [2 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff
lightly.
vest
(light green, purple)
R1: (loosely) (in light green) ch 26, slst to the first 1
chain to connect them into a loop (see picture 1).
R2-R4: sc around (3 rounds) [25]
R5: (change to purple) (dec, 4sc) x2, cut the yarn
and skip 1 st (see picture 2), then start off again
by ch 1: (dec, 2sc) x4 [20] 2
R6: 8sc, dec, cut the yarn and skip 1 st, then start
off again by ch 1: dec, 8sc [18]
Slst, fasten off and leave a tail for sewing, or not leaving a tail and
medaami 6
just glue them later.
© 2023 Medaami Patterns
legs (make 2)
(purple, white, beige, dark gray)
R1: (in purple) 6sc in magic ring [6]
medaami
R2: inc x6 [12]
R3: (change to white) BLO, sc around [12]
R4: FLO, sc around [12]
Flip the upper part inside out to make it easier to work with (so the
back loops will show up), you’ll flip it back again after you finish
making the piece.
R5: (crochet into the back loops of R3) (change to beige) 5sc, sk 1 st,
5sc, sk 1 st [10]
R6-R7: (change to dark gray) sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Slst, fasten off, leave a tail for sewing and stuff firmly.
hair
(bud green)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9: (inc, 23sc) x2 [50]
R10-R17: sc around (8 rounds) [50]
R18: 17sc, 2hdc, 11dc, 2hdc, 18sc [50]
Slst, fasten off and leave a tail for sewing.
medaami
R2: sc around [12]
R3: (dec, 2sc) x3 [9]
R4: ch 1, fold the piece (see picture), then sc
through both layers to close the gap: 4sc, slst.
Fasten off, and weave the tail in.
bag detail
(light blue)
5sc in magic ring [5]
Slst, fasten off and weave in/seal off the tails.
strap
(dark gray)
Ch 31, (starting from 2nd ch from hook) 30sc [30]
Fasten off and and weave in/seal off the tails.
strap detail
(light gray)
Ch 2, (starting from 2nd ch from hook) sc [1]
Fasten off and and weave in/seal off the tails.
bag assembly
1. Attach the bag detail in the middle of the bag.
2. Using light gray yarn, embroider a circle surrounding the bag detail
like so.
3. Attach the strap on the back side of the bag like so.
4. Attach the strap detail on the left side of the strap like so.
(pictures on the next page)
© 2023 Medaami Patterns medaami 8
medaami
1 2 3 4
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
1. Insert the vest to the body from the upper part of the body. Leave
a gap to sew the body to the head later. Don’t sew/glue the vest first.
2. Sew the body to the head. Reposition the vest upwards then sew/-
glue it in place.
3. This step is optional, I inserted a wire through the upper part of the
body for the arms. (Not recommended if you make this amigurumi
for kids) (picture is just for illustration)
1 2 3
medaami 9
(illustration only)
medaami
4 5
6. Attach the hair diagonaly like so.
Before sewing them, place and posi-
tion the hair using the ballpoint pins
so the result will be neater
A B
© 2023 Medaami Patterns
medaami 10
8. Attach the Purple Detail in the middle of the upper body and form
a “V’ shape like so:
9. Insert the bag to the body diagonaly like so:
10. (Optional) I used peach coloured blush for the cheeks.
medaami
8 9 10
medaami
leaving a tail and just glue them later.
legs
(soft yellow)
R1: 3sc in magic ring [3]
R2: inc, sc, inc [5]
Slst, fasten off and leave a tail for sewing, or not leav-
ing a tail and just glue them later.
arms
(soft yellow)
R1: 3sc in magic ring [3]
R2: inc, sc, inc [5]
R3: sc around [5]
Slst, fasten off and leave a tail for sewing.
Back detail
(black)
R1: ch 15, (starting from 2nd ch from hook) slst, 2sc,
8hdc, 2sc, slst. Turn to the other side and work on
the other loops of the chains: slst, 2sc, 8hdc, 2sc,
slst.
Fasten off, leave a tail for sewing or not leaving a
medaami 12
tail and just glue them later.
© 2023 Medaami Patterns
arms detail (make 2)
(black)
Ch 2, (starting from 2nd ch from hook) sc [1]
Fasten off and weave in/seal off the tails.
medaami
legs detail (make 2)
(black)
Ch 2
Fasten off and weave in/seal off the tails.
1 2 3
medaami 13
4 5 6
© 2023 Medaami Patterns
medaami
I hope you had fun making them! Don’t forget to leave a review and share pictures
of your creations and tag me on instagram @medaami, I'd really appreciate it and
I’d be really happy to see your creations!
IMPORTANT:
This pattern is originaly designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. Please respect
and appreciate every artists’ works. We create and design amigurumi patterns
using our precious time and hard work :) Translating this pattern is also strictly
prohibited. However, you may sell the finished product in SMALL mass but
please clearly credit Medaami as the pattern designer. Thank you for under-
standing!
2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in beige, orange, light green, green, dark green, olive
green, black, light gray and dark gray colour
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use a 10mm eyes)
- Ball point pins for assembly
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Skye turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet slst = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
tc = triple crochet
inc = increase (2sc in 1 st)
medaami 3
dec = decrease (sc in 2 st)
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
medaami 4
skye PATTERN
HEAD
(beige)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Slst, fasten off, weave the tail in, add more stuffing if needed.
Waist detail
(olive green)
Ch 37, (starting from 2nd ch from hook) 36slst [36]
Fasten off and weave in/seal off the tails.
necklace
(dark gray)
Ch 25
Fasten off and weave in/seal off the tails.
medaami 5
pendant
(light gray)
Ch 2, (starting from 2nd ch from hook) slst [1]
Fasten off and weave in/seal off the tails.
hair base
(orange)
We’ll be making the hair strands during assembly.
R1: 6sc in magic ring [6]
R2: BLO, inc x6 [12]
R3: BLO, (inc, sc) x6 [18]
R4: BLO, (inc, 2sc) x6 [24]
R5: BLO, (inc, 3sc) x6 [30]
R6: BLO, (inc, 4sc) x6 [36]
R7: BLO, (inc, 5sc) x6 [42]
R8: BLO, (inc, 6sc) x6 [48]
R9-R15: BLO, sc around (7 rounds) [48]
Slst, fasten off and leave a long tail for sewing.
arm a
(beige, green, olive green)
R1: (in beige) 4sc in magic ring [4]
R2: (change to green) inc x4 [8]
R3: (change to olive) sc around [8]
R4-R7: (change to beige) sc around (4 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff lightly
arm a
(beige, green, olive green)
R1: (in beige) 4sc in magic ring [4]
R2: (change to green) inc x4 [8]
R3-R5: (change to olive) sc around (3 rounds) [8]
R6-R7: (change to beige) sc around (2 rounds) [8]
medaami 6
Slst, fasten off, leave a tail for sewing and stuff lightly
body
(dark green, black, beige, green, light green)
We’re making the body base first.
R1: (in dark green) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6-R8: (change to black) sc around (3 rounds) [24]
R9: (change to beige) sc around [24]
R10: (dec, 2sc) x6 [18]
R11: sc around [18]
Slst, fasten off, leave a tail for sewing and don’t stuff yet.
Now we’re going to make the armor.
R1: (loosely) (in green) ch 26 [26]
Slst to the first chain to connect them into a loop, then start in the
same st.
R2: sc around [26]
R3: 12sc, (change to dark green) 2sc, (change to green) 12sc [26]
R4: (change to dark green) sc around [26]
R5: (dec, 2sc) x2, dec, sc, cut off yarn and sk 5
sts, starting off again by ch 1, sc dec, 2sc, dec,
3sc [16]
R5: 8sc, cut off yarn and sk 5 sts, starting off
again by ch 1, 8sc [16] (skip 5 sts, starting
off by chain 1)
Slst, fasten off and leave a tail for sewing, or not leaving a tail and
just glue them later.
Now we’re going to make details on the armor:
(see pictures on the next page)
1) Using light green yarn, embroider a curved line shaping like a “(”.
2) Embroider another curved line shaping like a “)” on the other side.
1 2 3
4 5
Insert the armor to the body base (position it in the middle, leaving
a little gap on the upper body and don’t glue/sew it yet), then stuff
the body firmly.
headband
(light green)
Work in rows. Ch 1 and turn after each rows.
R1: ch 59, (starting from 2nd ch from hook) 58sc [58]
R2-R3: sc in all sts (2 rows) [58]
medaami 8
Fasten off and weave in/seal off the tails.
legs (make 2)
(dark gray, black, dark green)
R1: (in dark gray) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (change to black) (BLO) sc around [12]
R4: (FLO) (change to black) sc around [12]
Flip the upper part inside out to make it easier to work with (so the
back loops will show up).
R5: (crochet into the back loops of R3) (change to dark green) 5sc, sk
1 st, 5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Slst, fasten off, leave a tail for sewing and stuff firmly.
hair a (make 3)
(orange)
Ch 19, (starting from 2nd ch from hook) slst, 2sc, hdc,
3dc, 10tc, ch 1 and slst [18]
Fasten off and leave a tail for sewing, or not leaving
a tail and just glue them later.
hair b (make 2)
(orange)
Ch 17, (starting from 2nd ch from hook) slst, 2sc, hdc,
3dc, 8tc, ch 1 and slst [16]
Fasten off and leave a tail for sewing, or not leaving
a tail and just glue them later.
hair c (make 2)
(orange)
Ch 13, (starting from 2nd ch from hook) slst, 2sc, hdc,
3dc, 4tc, ch 1 and slst [12]
Fasten off and leave a tail for sewing, or not leaving
a tail and just glue them later. medaami
9
braid
(orange)
Starting off by leaving a tail for sewing, or
not leaving a tail and just glue them later.
1) Ch 28, (starting from 2nd ch from hook) slst, 3sc, hdc, 3dc, 10tc, sk
2 ch, slst.
2) Ch 19, (starting from 2nd ch from hook) slst, 3sc, hdc, 3dc, 10tc.
3) sk 2 ch, slst.
4) Ch 19, (starting from 2nd ch from hook) slst, 3sc, hdc, 3dc, 10tc, sk
2 ch, slst, fasten off and weave the tails in.
5) Braid the 3 strands, then secure it with a little of glue/hot glue on
the ends.
6) Make the hair tie using green yarn: ch 9, seal off/weave in the tails.
7) Attach the hair tie to the end of the braid like so:
1 2 3 4
5 6 7
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing. I'm using a hot glue gun to attach some of the parts, but
if you make this amigurumi for kids, I recommend to make it fully
sewn. medaami 10
1. Sew the body to the head. Then, pull the armor up to the upper
part of the body. Sew/glue it in place.
2. Sew the legs to the lower sides of the body. (If you wanna make
it stand, just sew the legs on the bottom of the body.)
1 2
3. Attach the necklace surrounding the neck.
4. Attach the pendant in the centre of the neck.
5. Attach the waist detail surrounding the waist, slightly downwards
between the legs
Front Back
3 4 5
6. This step is optional, I inserted a wire through the upper part of the
body for the arms. (Not recommended if you make this amigurumi
for kids)
7. Sew the arms to the sides of the upper body.
medaami 11
(illustration only)
8. Using ball point pins, mark a horizontal line starting from the right
side of the hair base on R12 (approximately 8sts away from the loop
alligned on the center of the face on R12 of the hair base), to the back,
then to the left side of the hair base. Don’t mind moving to any
rounds as long as it’s a horizontal line.
D) Ch 12, (starting from 2nd chain from hook) slst, 2sc, hdc, 3dc, 4tc
[11]
E) Skip 2 loops, slst on the 3rd loop towards the next ball point pin.
F) Repeat Step D and E five more times until you have a total of 7
strands of lower back hair.
G) Fasten off, weave the tails in. Arrange the strands neatly then pin
them in place (don’t sew/glue them yet).
medaami 12
10. Using ball point pins, mark a straight line starting from the loop
that you started the lower back hair, to the loop that you ended the
lower back hair.
A C
D) Ch 19, (starting from 2nd chain from hook) slst, 2sc, hdc, 3dc, 11tc,
skip 2 loops, slst on the 3rd loop towards the next ball point pin.
E) Ch 21, (starting from 2nd chain from hook) slst, 2sc, hdc, 3dc, 13tc,
skip 2 loops, slst on the 3rd loop towards the next ball point pin.
F) Repeat step E.
G) Repeat Step D.
H) Ch 17, (starting from 2nd chain from hook)
slst, 2sc, hdc, 3dc, 9tc, skip 2 loops, slst on the
3rd loop towards the next ball point pin.
I) Fasten off, weave the tails in, arrange the
medaami 13
strands neatly using ball point pins. Don’t
sew/glue them in place yet.
12. Place Hair A on the centre of the face, starting from the hairline
and to the back
13. Place another 2 remaining Hair A on each left and right sides of
the middle Hair A, but in slightly outwards direction like so:
14. Place 2 Hair B on each left and right sides of the previous strands
in slightly outwards direction like so:
12 13 14
15. Place 2 Hair C on each the left and right side of the previous
strands like so:
16. Sew/glue all Hair A, B, C in place. Then, place the head band sur-
rounding the hair line (for the back part, place it underneath the lower
back hair) and sew/glue it in place.
15 16
17. Sew/glue the braid on the right side of the head, below the lower
back hair, above the headband.
18. Place the end of the braid to the right side of the shoulder, and
sew/glue it in place.
19. Sew/glue all hair strands in place.
(pictures on the next place)
medaami 14
17 18
19. Sew/glue all hair strands in place.
20. I cut 2 small triangles out off black felt for the eyeliner (or you can
just embroider them) and also used peach coloured blush for the
cheeks.
19 20
medaami 15
I hope you had fun making them! Don’t forget to leave a review and share pictures of
your creations and tag me on instagram @medaami, I'd really appreciate it and I’d
be really happy to see your creations!
Please purchase my patterns ONLY on Etsy and Ravelry (Medaami Patterns) to support
me so I can make more cute patterns for you guys!
medaami 16
fade
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
IMPORTANT:
This pattern is originaly designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. Please respect
and appreciate every artists’ works. We create and design amigurumi patterns
using our precious time and hard work :) Translating this pattern is also strictly
prohibited. However, you may sell the finished product in SMALL mass but
please clearly credit Medaami as the pattern designer. Thank you for under-
standing!
2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in beige, black, dark gray, light gray, navy blue, dark
violet and white colour
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use a 10mm eyes)
- Ball point pins for assembly
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun
- (optional) Gray and black eyeshadow
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Fade turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet slst = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
tc = triple crochet
medaami 3
inc = increase (2sc in 1 st)
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
medaami 4
fade PATTERN
HEAD
(beige)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Slst, fasten off, weave the tail in, add more stuffing if needed.
Waist detail
(light gray)
R1: ch 19, (starting from 2nd ch from hook) 18slst [18]
Fasten off and weave in/seal off the tails.
medaami 5
hair base
(black)
R1: 6sc in magic ring [6]
R2: BLO, inc x6 [12]
R3: BLO, (inc, sc) x6 [18]
R4: BLO, (inc, 2sc) x6 [24]
R5: BLO, (inc, 3sc) x6 [30]
R6: BLO, (inc, 4sc) x6 [36]
R7: BLO, (inc, 5sc) x6 [42]
R8: BLO, (inc, 6sc) x6 [48]
R9-R15: BLO, sc around (7 rounds) [48]
Slst, fasten off and leave a long tail for sewing.
body
(black, navy blue, light gray, dark gray, beige)
R1: (in black) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6: (change to navy) sc around [24]
R7: 7sc, (change to light gray) 2sc, (change to navy) 4sc, (change to
light gray) 4sc, (change to navy) 7sc [24]
R8: 7sc, (change to light gray) 3sc, (change to navy) 3sc, (change to
light gray) 4sc, (change to navy) 7sc [24]
R9: 7sc, (change to light gray) 3sc, (change to navy) sc, (change to
dark gray) sc, (change to navy) sc, (change to light gray) 4sc,
(change to navy) 7sc [24]
R10: dec, 2sc, dec, sc, (change to light gray) sc, dec, (change to beige)
2sc, dec, (change to light gray) 2sc, dec, (change to navy) 2sc, dec,
2sc [18]
R11: sc around following each stitch’s colour. [18]
medaami 6
Slst, fasten off, leave a tail for sewing stuff fully.
legs (make 2)
(black, light gray)
R1: (in black) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (change to light gray) (BLO) sc around [12]
R4: (FLO) (change to black) sc around [12]
Flip the upper part inside out to make it easier to work with (so the
back loops will show up).
R5: (crochet into the back loops of R3) 5sc, sk 1 st, 5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Slst, fasten off, leave a tail for sewing and stuff firmly.
Now we’re gonna make details on the feet.
1. Make the middle bean: (in light gray yarn) Ch 2, (starting from 2nd
ch from hook) hdc. Seal off the tails.
2. Using light gray yarn, pull out the yarn from the toe, then tie a knot
2 times, as close as possible to the toe.
3. Insert the needle to the same hole that you pulled out, then pull it
out again next to it.
4. Repeat until you have 3 toe beans.
5. Glue the middle bean that you made earlier below the toe beans.
Photos 1-4 are illustrations only.
Make the toe beans in light gray colour.
1 2 3
medaami 7
4 5
arms (make 2)
(beige, dark gray, black)
R1: (in beige) 4sc in magic ring [4]
R2: (change to dark gray) inc x4 [8]
R3-R7: (change to black) sc around (5 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff lightly
Now we’re going to make the details on the arms.
Using beige yarn, embroider random lines on the
arms like so:
collar
(dark violet, navy blue, light gray)
(in dark violet) Ch 29, (starting from 2nd ch from hook) 2sc, 24hdc,
2sc [28]
Fasten off and leave a tail for sewing, or not leav-
ing a tail and just glue them later.
Make another one in navy blue colour.
Now, you have 2 pieces that you’re going to cro-
chet through both of their stitches.
1. Allign the dark violet piece on top of the navy blue piece. We’re
going to start from the loop below the first stitch (see picture).
2. (in light gray) Ch 1 to start off.
3. Crochet: (5sc, inc) x4, 3sc. For the last sc, you sc to the loop of the
first chains that you made for those 2 pieces (we do this to make
the ends appear flatter, shaping the shape of a collar).
4. Slst in the same loop, then fasten off and weave in/seal off the
tails. (Optional) Embroider random lines for details.
side pocket
(dark violet)
R1: ch 5, (starting from 2nd ch from hook) 4sc,
turn to the other side and 4sc again, and now
you’re working in rounds [8]
R2-R4: sc around (3 rounds) [8]
R5: sc, insert little stuffing, pinch the gap close,
then close the gap by 3sc through both layers.
Fasten off, leave a tail for sewing, or not leaving
a tail and just glue them later.
zipper
(dark violet, gray)
We’re making the dark violet piece first.
Ch 3, (starting from 2nd ch from hook) 2slst [2]
Fasten off and weave in/seal off the tails.
F G H I
These hair strands are going to be attached on the back of the head.
Finish off all hair by fastening off, leave a tail for sewing. or not leav-
ing a tail and just glue them later. Weave any remaining tails in.
hair f
(in black) Ch 16, (change to white) ch 13, (starting from 2nd ch from
hook) slst, 2sc, hdc, 3dc, 5tc, (change to black) 15tc, ch 1 and slst [28]
hair g
(in black) Ch 18, (change to white) ch 13, (starting from 2nd ch from
hook) slst, 2sc, hdc, 3dc, 5tc, (change to black) 17tc, ch 1 and slst [30]
hair h
(in black) Ch 20, (change to white) ch 13, (starting from 2nd ch from
hook) slst, 2sc, hdc, 3dc, 5tc, (change to black) 19tc, ch 1 and slst [32]
hair i
(in black) Ch 22, (change to white) ch 13, (starting from 2nd ch from
hook) slst, 2sc, hdc, 3dc, 5tc, (change to black) 21tc, ch 1 and slst [34]
(optional) To create the ombre
effect, apply gray eyeshadow on
the line where the white meets
the black. Then, apply black eye-
shadow on top of it. Don’t apply
too much so it won’t be messy.
medaami 11
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
1 2
3. This step is optional, I inserted a wire through the upper part of the
body for the arms. (Not recommended if you make this amigurumi
for kids)
4. Sew the arms to the sides of the upper body.
5. Attach the side pocket to the right side of the waist (our POV).
3 4 5
medaami 12
6. Attach the waist detail to the left side of the waist.
7. Attach the collar outlining the beige area on the front body then
surrounding the neck. Leave a little gap on the centre.
6 7
8. Attach the zipper in the middle middle of the chest like so:
9. Sew the hair base to the head diagonaly like so. Before doing this,
I recommend to read step 21 on page 15 first.
8 9
10. Using ball point pins, place Hair A starting from the right side of the
forehead to the right side of the head like so:
11. On attaching Hair A, leave a little gap like so (for the extra hair
strand):
12. Twist the ends of all hair strands a little to make them curly.
medaami
12 13
10 11
13. We’re going to pin all hair strands first, so don’t sew/glue them in
place yet.
Place Hair B below Hair A, overlapping half part of the top strands.
14. Place Hair C below Hair B, Hair D below hair C, and Hair E below
Hair D. Only overlap the top part of the strands, don’t overlap the ends
(see picture).
13 14
15. Now we’re attaching the back hair. Place Hair F next to Hair E, hiding
the top part of the strand below Hair E like so. Make sure the line where
the black meets the white is on the same level as Hair E’s.
16. Place the rest of the hair stands in sequence (Hair G next to Hair F,
Hair H next to Hair G, and Hair I next to Hair H). Hide their top parts of
the strand below Hair E.
17. Make sure your last strand (Hair I) is the same level as your first
strand that you attach (Hair A). If it’s too long or short, you can just
freely move it higher or lower under Hair E.
medaami 14
15 16 17
18. Sew/glue the hair strands that you’ve placed.
Place the second strand of Hair D that you made on the centre of the
forehead and to the side, slightly to the back of the head like so:
19. Place the second strand of Hair C that you made next to Hair D
that you just placed. Place the end of Hair C to the side of the head,
forming a little gap/curve to make the hair look more volumed.
Sew/glue the strands in place.
18 19
20. Attach the extra strand below Hair A, on the gap that you leave
earlier.
21. (optional) Using brown eyeshadow and a super thin brush, carefully
draw a line, forming like an upside down and stretched “V” shape
below the eyes like so. You can practice first on the back of the head
before sewing the hair base, this way you can make sure you won’t
make a mess and also the back of the head will be covered with the
hair base so your “practice” won’t be visible.
22. I cut 2 small triangles out off black felt for the eyeliner (or you
can just embroider them) and also used peach coloured blush for the
cheeks.
20 21
medaami
22
15
And.. You’re done!
I hope you had fun making them! Don’t forget to leave a review and share pictures of
your creations and tag me on instagram @medaami, I'd really appreciate it and I’d
be really happy to see your creations!
Please purchase my patterns ONLY on Etsy and Ravelry (Medaami Patterns) to support
me so I can make more cute patterns for you guys!
medaami 16
Neon
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
IMPORTANT:
This pattern is originaly designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. Please respect
and appreciate every artists’ works. We create and design amigurumi patterns
using our precious time and hard work :) Translating this pattern is also strictly
prohibited. However, you may sell the finished product in SMALL mass but
please clearly credit Medaami as the pattern designer. Thank you for under-
standing!
2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in beige, light gray, yellow, dark gray, white, navy blue,
light blue, blue, dark violet, light lavender, and bronze colour
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use a 10mm eyes)
- Ball point pins for assembly
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Neon turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet slst = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
tc = triple crochet
medaami 3
inc = increase (2sc in 1 st)
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
medaami 4
neon PATTERN
HEAD
(beige)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Slst, fasten off, weave the tail in, add more stuffing if needed.
face detail
(light gray)
R1: ch 6, (starting from 2nd ch from hook) 5slst [5]
Fasten off and weave in/seal off the tails.
medaami 5
hair base
(blue)
We will be making the hair strands during the
assembly.
R1: 6sc in magic ring [6]
R2: BLO, inc x6 [12]
R3: BLO, (inc, sc) x6 [18]
R4: BLO, (inc, 2sc) x6 [24]
R5: BLO, (inc, 3sc) x6 [30]
R6: BLO, (inc, 4sc) x6 [36]
R7: BLO, (inc, 5sc) x6 [42]
R8: BLO, (inc, 6sc) x6 [48]
R9-R15: BLO, sc around (7 rounds) [48]
Slst, fasten off and leave a long tail for sewing.
body
(navy blue, light lavender, white, blue, dark gray)
We’re making the body base first.
R1: (in navy) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6-R9: (change to lavender) sc around (4 rounds) [24]
R10: (change to white) (dec, 2sc) x6 [18]
R11: sc around [18]
Slst, fasten off, leave a tail for sewing and don’t stuff yet.
medaami 6
Using light lavender yarn, make the body detail:
Ch 4, (starting from 2nd ch from hook) 3slst [3]
Fasten off and leave a tail for sewing, or not leaving
a tail and just glue them later.
R2: 6sc, (change to blue) 4sc, (change to navy) 6sc, (change to blue)
4sc, (change to navy) 6sc [26]
R3: sc around [26]
R4: (change to dark gray) (dec, 2sc) x3, cut off
yarn and sk 3 sts, starting off again by ch 1, (2sc,
dec) x2, 3sc [18]
R5: 9sc, cut off yarn and sk 3 sts, starting off
again by ch 1, 9sc [18]
Slst, fasten off and leave a tail for sewing, or not leaving a tail and
just glue them later.
medaami 7
(more on the next page)
Insert the armor to the body base (position it in the middle, leaving
a little gap on the upper body and don’t glue/sew it yet), then stuff
the body firmly.
legs (make 2)
(light lavender, white, navy blue)
R1: (in lavender) 6sc in magic ring [6]
R2: (change to white) inc, (change to lavender) inc,
(change to white) inc x2, (change to lavender) inc,
(change to white) inc [12]
R3: (change to navy) (BLO) sc around [12]
R4: (FLO) 5sc, (change to lavender) 2sc, (change to navy) 5sc [12]
Flip the upper part inside out to make it easier to work with (so the
back loops will show up).
R5: (crochet into the back loops of R3) (change to beige) 5sc, sk 1 st,
5sc, sk 1 st [10]
R6-R7: (change to navy) sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Slst, fasten off, leave a tail for sewing and stuff firmly.
medaami 8
Armor detail 2
(dark gray, yellow)
R1: ch 5, (starting from 2nd ch from hook) sc, 2dc, sc [4]
Fasten off.
Using yellow yarn, embroider an upside down triangle or a “v”
shape like so:
side pocket
(dark violet)
R1: ch 5, (starting from 2nd ch from hook) 4sc,
turn to the other side and 4sc again, and now
you’re working in rounds [8]
R2-R4: sc around (3 rounds) [8]
R5: sc, insert little stuffing, pinch the gap close,
then close the gap by 3sc through both layers.
Fasten off, leave a tail for sewing, or not leaving
a tail and just glue them later.
backpack
(light blue, dark gray)
R1: (in light blue) 4sc in magic ring [4]
R2: inc x4 [8]
R3: (change to dark gray) (inc, sc) x4 [12].
Fasten off and weave in/seal off the tails.
medaami 9
backpack details (make 2)
(bronze)
R1: ch 5, (starting from 2nd ch from hook) sc, inc x2,
sc [6]
Fasten off and weave in/seal off the tails.
arms (make 2)
(beige, navy blue, dark gray, bronze)
R1: (in beige) 4sc in magic ring [4]
R2: (change to navy) inc x4 [8]
R3-R4: sc around (2 rounds) [8]
R5: (change to dark gray) sc around [8]
R6-R7:(change to beige) sc around (2 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff
lightly
Using bronze yarn, embroider 2 horizontal lines surrounding each
arm on R2-R3.
medaami 10
side hairs (make 2)
(blue)
Ch 13, (starting from 2nd ch from hook) slst, 3sc,
hdc, 7dc [12]
Fasten off, leave a tail for sewing. or not leaving
a tail and just glue them later.
bangs (make 2)
(blue)
Ch 19, (starting from 2nd ch from hook) slst, 2sc,
hdc, 2dc, 11tc, ch 1 and slst [18]
Fasten off, leave a tail for sewing. or not leaving
a tail and just glue them later.
medaami 11
yellow outer ponytails (make 8)
(yellow)
Ch 8, (starting from 2nd ch from hook) 2slst,
sc, hdc, 2dc, dc inc, turn to the other side of
the chains, dc inc, 2dc, hdc, sc, 2slst [16]
Fasten off and weave in/seal off the tails.
PONYTAILS ASSEMBLY
medaami 12
(more on the next page)
2. Glue one piece of the outer ponytails to the inner ponytail. Only
glue the lower part. Leave the upper part unglued so it can create
the shape like a blooming flower.
3. Glue another one on the opposite side.
4. Glue the other 2 pieces on the remaining 2 gaps.
5. Do the same on the other ponytail. Again, bend the top part of
the outer ponytails to make them look like blooming flowers.
2 3 4 5
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
medaami 13
1. Sew the body to the head. Then, pull the armor up to the upper
part of the body. Sew/glue it in place.
2. Sew the legs to the lower sides of the body. (If you wanna make
it stand, just sew the legs on the bottom of the body.)
1 2
3. This step is optional, I inserted a wire through the upper part of the
body for the arms. (Not recommended if you make this amigurumi
for kids)
4. Sew the arms to the sides of the upper body.
5. Attach both Armor Detail 1 on the chest towards the armpits like so:
3 4 5
6. Attach Armor Detail 2 on the center of the chest like so:
7. Attach DARK VIOLET waist detail to the right side of the waist (our
POV).
8 9 10
11. Attach the backpack details on the sides of the backpack like so:
12. Sew the hair base to the head diagonaly like so:
11 12
medaami 15
13. Using ball point pins, mark a horizontal line starting from the right
side of the hair base on the last round (approximately 9sts away from
the loop alligned on the center of the face on R12 of the hair base),
to the back, then to the left side of the hair base. Don’t mind moving
to any rounds as long as it’s a horizontal line.
14. We’re now going to make the YELLOW layer of the hair first:
A) Ch 15 on the loop that you put your first ball point pin.
B) (starting from 2nd chain from hook) slst, 2sc, hdc, 3dc, 7tc [14]
C) Skip 2 loops, slst on the 3rd loop towards the next ball point pin.
A C
D) Ch 15, (starting from 2nd chain from hook) slst, 2sc, hdc, 3dc, 7tc
[14]
E) Skip 2 loops, slst on the 3rd loop towards the next ball point pin.
F) Repeat Step D and E seven more times until you have a total of 9
strands of the yellow layer of hair.
G) Fasten off, weave the tails in, arrange them neatly then glue
them in place.
medaami 16
(photos on the next page)
15. We’re now going to make the BLUE layer of the hair right above the
yellow layer.
A) Ch 17 on the loop that is 2 loops away upwards from the first strand
of yellow hair layer that you made (see picture).
B) (starting from 2nd chain from hook) slst, 2sc, hdc, 2dc, 10tc [16]
C) Skip 2 loops, slst on the 3rd loop that forms a horizontal line like the
previous yellow layer. Make sure that your BLUE strand ended up on
the middle of the YELLOW strands (see picture).
(You can skip more than 2
loops as long as the blue
strand will end up in the
middle on the yellow strand,
not equally on top of each
other.)
A C
D) Ch 17, (starting from 2nd chain from hook)
slst, 2sc, hdc, 2dc, 10tc [16]
E) Skip 2 loops (or more), slst on the 3rd loop
that forms a horizontal line like the previous
yellow layer. Make sure that your BLUE strand
ended up on the middle of 2 YELLOW strands.
F) Repeat Step D and E eight more times until you have a total of 10
strands of the blue layer of hair.
G) Fasten off, weave the tails in, arrange them neatly then glue
medaami 17
them in place.
16. We’re now going to make another BLUE
layer of top of the head.
A) Ch 17 on the loop that is next to the first A
strand of blue hair layer that you made (see
picture).
B) (starting from 2nd chain from hook) slst, sc,
hdc, dc, 10tc, dc, hdc [16]
C) Skip 1 loop, slst on the 2nd loop next to it.
D) Ch 21, (starting from 2nd chain from hook) C
2dc, 16tc, dc, hdc [20] Skip 1 loop, slst on the
2nd loop next to it.
E) Ch 25, (starting from 3rd chain from hook) 21tc, 2dc, hdc [24] Skip
1 loop, slst on the 2nd loop next to it.
F) Repeat step E.
G) Repeat step D.
H) Ch 17, (starting from 2nd chain from hook) slst, sc, hdc, dc, 10tc, dc,
hdc [16] Skip 1 loop, slst on the 2nd loop next to it.
I) Using ball point pins, position the strands to the back. Don’t sew/glue
them in place yet.
J) Leave gaps between the first and second strand, and the fifth and
sixth strand. You’ll be inserting the yellow inner hair that you made
earlier on page 11.
17 18
19. Sew/glue the bangs from the top of the middle forehead, then
down diagonally like so, forming like a curtain shape:
20. Sew/glue the ponytails on top of the left and right sides of the
head, slightly to the back. Make sure that from the front, the two
petals of the ponytails are facing forward like so:
19 20
21. Attach the face detail in the middle of the face, on the same
medaami 19
level as the eyes.
22. Embroider tiny diagonal lines using light gray yarn forming like a
little angry eyebrows like so: (I drew them using white colour to make
them visible)
23. I cut 2 small triangles out off black felt for the eyeliner (or you
can just embroider them) and also used peach coloured blush for
the cheeks.
21 22 23
And.. You’re done!
I hope you had fun making them! Don’t forget to leave a review and share pictures of
your creations and tag me on instagram @medaami, I'd really appreciate it and I’d
be really happy to see your creations!
Please purchase my patterns ONLY on Etsy and Ravelry (Medaami Patterns) to support
me so I can make more cute patterns for you guys!
medaami 20
sova
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
This pattern is originally designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. However, you
may sell the finished product in SMALL mass but please clearly credit Medaami
as the pattern designer. Thank you for understanding!
Have fun! :)
2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in beige, mocha, ivory, white, blue, gray, dark gray, and
dark brown colour
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use a 10mm eyes)
- A small amount of light blue acrylic paint and a painting brush
- Dark brown eyeshadow and a small brush
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun (recommended) or fabric glue
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Sova turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet slst = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
tc = triple crochet
inc = 2 sc in 1 st
dec = 1 sc in 2 st
[...] = a total of [...] stitches on that round
3
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
4
sova PATTERN
HEAD
(beige)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Sl st, fasten off, weave the tail in, add more stuffing if needed.
5
body
(dark brown, gray)
R1: (in dark brown) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x2, inc, sc, (change to gray) sc,
(change to dark brown) (inc, 2sc) x2 [24]
R5: 10sc, (change to gray) 3sc, (change to dark
brown) 11sc [24]
R6-R9: (change to gray) sc around (4 rounds) [24]
R10: (dec, 2sc) x6 [18]
R11: sc around [18]
Sl st, fasten off, leave a tail for sewing and stuff
firmly.
legs (make 2)
(dark gray, dark brown)
R1: (in dark gray) 6sc in magic ring [6]
R2: inc x6 [12]
R3: BLO, sc around [12]
R4: FLO, sc around [12]
Flip the upper part inside out to make it easier
to work with (so the back loops will show up).
R5: (change to dark brown) (crochet into the
back loops on R4) 5sc, sk 1 st, 5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Sl st, fasten off, leave a tail for sewing and
stuff firmly.
6
arms (make 2)
(beige, dark brown, dark gray, gray)
R1: (in beige) 4sc in magic ring [4]
R2: (change to dark brown) inc x4 [8]
R3: (change to dark gray) sc around [8]
R4-R7: (change to gray) sc around (4 rounds) [8]
Sl st, fasten off, leave a tail for sewing and stuff
lightly
hair base
(mocha)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
Sl st, fasten off and leave a tail for sewing.
hair clip
(blue)
Ch 12, (starting from 3rd ch from hook) 10dc
Fasten off and seal the tails.
7
hair a
(ivory)
Work in rows. Ch 1 and turn after each rows.
R1: ch 9, (starting from 2nd ch from hook) 8sc [8]
R2: inc, 6sc, inc [10]
R3: inc, 8sc, inc [12]
R4: inc, 2sc, inc, 4sc, inc, 2sc, inc [16]
R5: inc, 14sc, inc [18]
R6: inc, 16sc, inc [20]
R7-R10: sc in all sts (4 rows) [20]
R11: dec, 16sc, dec [18]
R12: sc in all sts [18]
R13: dec, 14sc, dec [16]
R14: sc in all sts [16]
R15: dec, 12sc, dec [14]
R16: dec, 10sc, dec [12]
R17: dec, 8sc, dec [10]
R18: dec, 6sc, dec [8]
R19: dec, 4sc, dec [6]
R20: dec, 2sc, dec [4]
R21: sk 1 st, sc, sk 1 st, sc [2]
R22: sk 1 st, sc [1]
Sc around the whole piece in this direction:
Fasten off, leave a tail for sewing. or not leaving a tail and just glue
them later.
8
hair B
(ivory)
Work in rows. Ch 1 and turn after each rows.
R1: ch 7, (starting from 2nd ch from hook) 6sc [6]
R2: sc in all sts [6]
R3: inc, 4sc, inc [8]
R4-R13: sc in all sts (10 rows) [8]
R14: dec, 4sc, dec [6]
R15-R18: sc in all sts (4 rows) [6]
R19: dec, 2sc, dec [4]
R20: sc in all sts [4]
R21: sk 1 st, sc, sk 1 st, sc [2]
R22: sk 1 st, sc [1]
Sc around the whole piece in this direction:
Fasten off, leave a tail for sewing. or not leaving a tail and just glue
them later.
hair c
(ivory)
Ch 9, (starting from 2nd ch from hook) slst, hdc, 6dc
Fasten off, leave a tail for sewing. or not leaving a tail
and just glue them later.
9
ponytail
(ivory)
R1: 4sc in magic ring [4]
R2: (inc, sc) x2 [6]
R3: sc around [6]
R4: (inc, 2sc) x2 [8]
R5: sc around [8]
R6: (inc, 3sc) x2 [10]
R7: sc around [10]
R8: (inc, 4sc) x2 [12]
R9: sc around [12]
R10: (inc, 5sc) x2 [14]
R11: sc around [14]
R12: (inc, 6sc) x2 [16]
R13: sc around [16]
R14: (inc, 7sc) x2 [18] note:
R15: sc around [18] hdc dec = 2sts in 1 hdc
R16: (inc, 8sc) x2 [20] dc dec = 2sts in 1 dc
R17: sc around [20]
R18-R20: sc around (3 rounds) [20]
R21: dec, 3sc, hdc dec, 3dc, dc dec, 3dc, hdc dec, 3sc [16]
R22: dec, 2sc, hdc dec, 2dc, dc dec, 2dc, hdc dec, 2sc [12]
Sl st, fasten off, leave a tail for sewing and stuff LIGHTLY in the
deepest part..
10
cape collar
(blue)
Work in rows. Ch 1 and turn after each rows.
R1: Ch 25, (starting from 2nd ch from hook)
24sc [24]
R2: (inc, 7sc) x4 [28]
Fasten off and leave a tail for sewing.
cape
(blue)
Work in rows. Ch 1 and turn after each rows.
R1: Ch 11, (starting from 2nd ch from hook)
10sc [10]
R2-R4: sc in all sts (3 rows) [10]
R5: 3dc, 2hdc, 5sc [10]
R6: 5sc, 2hdc, 3dc [10]
R7: 3dc, 2hdc, 5sc [10]
Fasten off and leave a tail for sewing..
feather collar
(white)
Ch 29, (starting from 2nd ch from hook)
slst, 2sc, 22hdc, 2sc, slst [28]
Fasten off and leave a tail for sewing, or not
leaving a tail and just glue them later.
11
body detail
(dark brown)
Ch 4, (starting from 2nd ch from hook) 3sc
Fasten off and weave in/seal off the tail.
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the sewing.
I'm using a hot glue gun to attach some of the parts, but if you make
this amigurumi for kids, I recommend to make it fully sewn.
1 2
12
3. This step is optional, I inserted a wire through the upper part of
the body for the arms.
(Not recommended if you make this amigurumi for kids.)
4. Sew the arms to the sides of the upper body.
3 4
5. Sew the hair base to the head diagonally like so:
6. Sew/glue Hair A on top of the head, placing the pointy side 2
rounds below the mocha hair base.
5 6
7. Sew/glue Hair C on top of the side of Hair A like so:
8. Sew/glue Hair B on the centre of Hair A.
7 8 13
9. Place the cape collar surrounding the neck, then sew both ends to
connect them on the back.
10. Sew the cape on the back of the cape collar.
9 10
11. Place the feather collar surrounding the neck, then sew/glue both
ends to connect them on the front.
12. Glue the body detail on the belly.
11 12
13. Sew the ponytail on the middle of Hair B, then secure the end of
the ponytail using glue and attach it to the shoulder.
14
14. Glue the hair clip right on the line where Hair B meets the pony-
tail.
15. Using dark brown eyeshadow, carefully and lightly draw an “X” on
the light blue eye. Then you can add blushes for the cheeks, I’m
using a mixture of pink and orange eyeshadow.
14 15
I hope you had fun making them! Don’t forget to leave a review and share
pictures of your creations and tag me on instagram @medaami, I'd really
appreciate it and I’d be really happy to see your creations!
15
raze
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
This pattern is originally designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. However, you
may sell the finished product in SMALL mass but please clearly credit Medaami
as the pattern designer. Thank you for understanding!
Have fun! :)
2
DIFFICULTY
Intermediate
materials
- Any yarn in mocha, mustard yellow, tan/light brown, dark green,
black, orange, maroon and dark gray color
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use a 10mm eyes)
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun (recommended) or fabric glue
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Raze turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet slst = slip stitch
hdc = half double crochet x(...) = repeat (...) times
inc = increase (2 sc in 1 st)
dec = decrease (1 sc in 2 st)
[...] = a total of [...] stitches on that round
3
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
4
raze PATTERN
HEAD
(mocha)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Sl st, fasten off, weave the tail in, add more stuffing if needed.
5
body
(dark gray, mocha, dark green, mustard yellow)
R1: (in dark gray) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6: (change to mocha) sc around [24]
R7: (change to dark green) sc around [24]
R8-R9: (change to mustard yellow) 8sc, (change to dark gray) 8sc,
(change to mustard yellow) 8sc (2 rounds) [24]
R10: (dec, 2sc) x2, (change to dark gray) (dec, 2sc) x2, (change to
mustard yellow) (dec, 2sc) x2 [18]
R11: sc around [18]
Sl st, fasten off, leave a tail for sewing and stuff firmly.
legs (make 2)
(maroon, dark gray)
R1: (in maroon) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (change to dark gray) BLO, sc around [12]
R4: FLO, sc around [12]
Flip the upper part inside out to make it
easier to work with (so the back loops will
show up).
R5: (crochet into the back loops on R4) 5sc, sk
1 st, 5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Sl st, fasten off, leave a tail for sewing and
stuff firmly.
6
arm a
(mocha, black)
R1: (in mocha) 4sc in magic ring [4]
R2: (change to black) inc x4 [8]
R3-R4: (change to mocha) sc around (2 rounds) [8]
R5: (change to black) sc around (2 rounds) [8]
R6-R7: (change to mocha) sc around (2 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff lightly
arm B
(mocha, black, orange)
R1: (in mocha) 4sc in magic ring [4]
R2: (change to black) inc x4 [8]
R3: (change to orange) sc around [8]
R4-R7: (change to mocha) sc around (4 rounds) [8]
Sl st, fasten off, leave a tail for sewing and stuff lightly.
waist detail
(dark green)
Ch 35, (starting from 2nd ch from hook) 34slst
Fasten off and weave in/seal off the tail.
7
body detail
(orange)
Ch 5, (starting from 2nd ch from hook) 4sc
Fasten off and weave in/seal off the tail.
headphone band
(dark gray)
Starting off by leaving a tail for sewing.
1. Ch 39, (starting from 2nd ch from hook) 38hdc, ch 1 and turn [38]
2. (starting from 2nd ch from hook) 38hdc [38]
Fasten off and leave a tail for sewing (you now have 2 tails to sew
on both headphone cups).
8
cap
(mustard yellow)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9: BLO, sc around [48]
R10: (inc, 15sc) x3 [51]
R11: sc around [51]
R12: (inc, 16sc) x3 [54]
R13-R17: 23sc, cut off yarn and sk 8 sts, 23sc (5 rounds) [46
Sl st, fasten off and leave a tail for sewing, or not leaving a tail
and just glue them later.
9
Glue the strap to the inside of the cap hole like so:
hair base
(black)
We will be making the hair strands during the assembly.
R1: 6sc in magic ring [6]
R2: BLO, inc x6 [12]
R3: BLO, (inc, sc) x6 [18]
R4: BLO, (inc, 2sc) x6 [24]
R5: BLO, (inc, 3sc) x6 [30]
R6: BLO, (inc, 4sc) x6 [36]
R7: BLO, (inc, 5sc) x6 [42]
R8: BLO, (inc, 6sc) x6 [48]
R9-R15: BLO, sc around (7 rounds) [48]
Sl st, fasten off and leave a long tail for sewing.
10
hair a (make 3)
(tan/light brown, black)
R1: (in tan/light brown) 5sc in magic ring [5]
R2: inc x5 [10]
R3: BLO, sc around [10]
R4: sc around [10]
R5: FLO, sc around [10]
Flip the upper part inside out to make it easier to work
with (so the back loops will show up).
R6: (change to black) (crochet into the back loops on
R5) 4sc, sk 1 st, 4sc, sk 1 st [8]
R7-R12: sc around (6 rounds) [8]
Sl st, fasten off, leave a tail for sewing and stuff lightly.
hair b (make 2)
(tan/light brown, black)
R1: (in tan/light brown) 5sc in magic ring [5]
R2: inc x5 [10]
R3: BLO, sc around [10]
R4: sc around [10]
R5: FLO, sc around [10]
Flip the upper part inside out to make it easier to work
with (so the back loops will show up).
R6: (change to black) (crochet into the back loops on
R5) 4sc, sk 1 st, 4sc, sk 1 st [8]
R7-R14: sc around (8 rounds) [8]
Sl st, fasten off, leave a tail for sewing and stuff lightly.
11
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
1 2
3. This step is optional, I inserted a wire through the upper part of
the body for the arms.
(Not recommended if you make this amigurumi for kids.)
4. Sew the arms to the sides of the upper body.
3 4
12
5. Glue the shoulder straps right from the line of the dark green yarn
of the front body, to the shoulders, then to the back body.
6. Glue the waist detail right on the line of the dark green yarn and
surrounding the body, overlapping the shoulder straps a little.
7. Glue the body detal in the middle of the waist detail.
5, 6 7
9. Sew one of Hair A in the middle of the back side of the hair base,
on R9.
10. Sew the other two piece of Hair A on the sides, giving approxi-
mately 1-2sts in between. (You can position them first using ball
point pins to get the right position before completely sewing them.)
11. Sew both pieces of Hair B on the sides of Hair A.
12. Insert the cap slightly diagonally like so, showing a little hair base
on the cap’s hole.
13. Sew/glue the headphone cups on the sides of the head, right
below the cap.
12 13
14. Sew the headphone band on one headphone cup (slightly to the
back), then to the other headphone cup.
15. I cut 2 small pieces of triangle from black felt for the eyeliner (or
you can just embroider them), and also added blushes on the cheeks
using a mixture of pink and orange eyeshadow.
14 15
14
And.. You’re done!
I hope you had fun making them! Don’t forget to leave a review and share
pictures of your creations and tag me on instagram @medaami, I'd really
appreciate it and I’d be really happy to see your creations!
15
phoenix
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
IMPORTANT:
This pattern is originaly designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. Translating this
pattern is also strictly prohibited. However, you may sell the finished product in
SMALL mass but please clearly credit Medaami as the pattern designer. Thank
you for understanding!
***PLEASE NOTE: Some of the colours are different due to different lighting***
2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in mocha, dark brown, mustard, yellow, black, dark gray,
white and orange colour
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use 10mm eyes)
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Phoenix turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row
ch = chain BLO = back loop only
st(s) = stitch(es) FLO = front loop only
sc = single crochet sk = skip
hdc = half double crochet slst = slip stitch
dc = double crochet x(...) = repeat (...) times
tc = triple crochet
inc = increase (2sc in 1 st)
dec = decrease (sc in 2 st)
[...] = a total of [...] stitches on that round
medaami 3
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
medaami 4
phoenix PATTERN
HEAD
(mocha)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Slst, fasten off, weave the tail in, add more stuffing if needed.
medaami 5
body
(black, dark gray, white)
R1: (in black) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6-R7: (change to dark gray) sc around (2 rounds) [24]
R8: 11sc, (change to white) sc, (change to dark gray) 12sc [24]
R9: 10sc, (change to white) 3sc, (change to dark gray) 11sc [24]
R10: (dec, 2sc) x6 [18]
R11: sc around [18]
Slst, fasten off, leave a tail for sewing and stuff firmly.
legs (make 2)
(black)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: BLO, sc around [12]
R4: FLO, sc around [12]
Flip the upper part inside out to make it easier to work with (so the
back loops will show up).
R5: (crochet into the back loops on R4) 5sc, sk 1 st, 5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Slst, fasten off, leave a tail for sewing and stuff firmly.
medaami 6
hair base
(black)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
Slst, fasten off and leave a tail for sewing.
arms (make 2)
(mocha, dark gray, white)
R1: (in mocha) 4sc in magic ring [4]
R2: inc x4 [8]
R3: (change to dark gray) sc around [8]
R4-R7: (change to white) sc around (4 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff lightly
right collar
(yellow)
R1: ch 6, (starting from 2nd ch from hook) slst, 2sc,
2hdc [5]
Fasten off and seal off/weave in the tails.
medaami 7
left collar
(yellow)
R1: ch 7, (starting from 3rd ch from hook) 2hdc, 2sc,
slst [5]
Fasten off and seal off/weave in the tails.
jacket
(white)
Work in rows.
Ch 1 and turn after each rows.
R1: ch 26, (starting from 2nd ch from hook)
25sc [25]
R2-R5: sc in all sts (4 rows) [25]
Fasten off, leave a tail for sewing or not
leaving a tail and just glue them later.
1 2 3
4 5 6
7 8
medaami 9
Now we’re going to make details on the back side of the jacket.
1) Using dark gray yarn, embroider a “V” shape in the middle of the
back side of the jacket. Then add 2 horizontal lines on each sides of
the “V” shape.
2) Using yellow yarn, embroider a circle in the middle of the “V’
shape.
1 2
hair a (make 3)
(black)
R1: 5sc in magic ring [5]
R2: inc x5 [10]
R3: BLO, sc around [10]
R4-R8: sc around (5 rounds) [10]
Slst, fasten off, leave a tail for sewing and stuff lightly
hair b (make 3)
(black)
R1: 5sc in magic ring [5]
R2: inc x5 [10]
R3: BLO, sc around [10]
R4-R10: sc around (7 rounds) [10]
Slst, fasten off, leave a tail for sewing and
stuff lightly
medaami 10
hair C (make 4)
(mustard, black)
R1: (in mustard) 5sc in magic ring [5]
R2: inc x5 [10]
R3: BLO, sc around [10]
R4-R5: sc around (2 rounds) [10]
R6-R15: (change to black) sc around (10 rounds) [10]
Slst, fasten off, leave a tail for sewing and stuff lightly
hair D
(black)
R1: 5sc in magic ring [5]
R2: inc x5 [10]
R3: BLO, sc around [10]
R4-R22: sc around (19 rounds) [10]
Slst, fasten off, leave a tail for sewing and
stuff lightly
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
medaami 11
1. Sew the body to the head.
2. Sew the legs to the lower sides of the body. (If you wanna make
it stand, just sew the legs on the bottom of the body.)
1 2
3. Wrap the jacket around the body and sew/glue it in place.
4. This step is optional, I inserted a wire through the upper part of
the body for the arms.
3 4
5. Sew the arms to the sides of the upper body.
6. Sew the hair base diagonally like so:
medaami 12
5 6
7. Sew all three of Hair A on the left side of the head, alligning them
in the middle of the left eye, and give each of them spaces approxi-
mately 2-3 rounds in between.
8. Sew one Hair B beside the Hair A on the front. Sew/glue them
down to the forehead. (I’m using ballpoint pins to pin them down, I’ll
glue them in place once I finished attaching them all.)
7 8
9. Sew another Hair B beside the Hair B that you just sewed, slightly
upwards and not leaving a gap.
10. Sew the last Hair B beside it, slightly upwards and leave a gap.
9 10
11. Sew one Hair C between the first and second Hair B that you sewed.
12. Sew another Hair C between the second and third Hair B that you
sewed, and tuck it in the gap.
(pictures on the next page)
medaami 13
11 12
13. Sew another Hair C on top of the second Hair B that you sewed,
between those Hair C that you already sewed, slightly upwards.
14. Sew the last Hair C on top of the last Hair B that you sewed, slightly
upwards.
15. Sew Hair D between the second and third Hair A, and bring it
beside the third Hair B that you sewed.
13 14 15
16. Glue all Hair A to the right, sticking them to the other Hairs.
17. Place each Hair Details on each sides of the head, shaping them
to a thunder shape, then glue them in place.
16 17medaami 14
18. This step is optional. You can use a black eyeshadow and a brush
to make an ombre between the mustard and black colour of Hair C.
I hope you had fun making them! Don’t forget to leave a review and share
pictures of your creations and tag me on instagram @medaami, I'd really
appreciate it and I’d be really happy to see your creations!
medaami 15
omen
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
This pattern is originally designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. However, you
may sell the finished product in SMALL mass but please clearly credit Medaami
as the pattern designer. Thank you for understanding!
Have fun! :)
2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in black, lavender, dark gray, gray,and light blue colour
- Crochet hook that matches the size of your yarn
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun (recommended) or fabric glue
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Omen turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet slst = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
htc = half triple crochet
tc = triple crochet
inc = 2 sc in 1 st
dec = 1 sc in 2 st
[...] = a total of [...] stitches on that round
3
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
4
omen PATTERN
HEAD
(black)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R18: sc around (10 rounds) [48]
R19: (dec, 6sc) x6 [42]
R20: (dec, 5sc) x6 [36]
R21: (dec, 4sc) x6 [30]
R22: (dec, 3sc) x6 [24]
Stuff firmly.
R23: (dec, 2sc) x6 [18]
Sl st, fasten off, weave the tail in, add more stuffing if needed.
Belt
(dark gray)
Ch 31, slst to the first ch to connect both
ends into a loop, 30sc [30]
Slst, fasten off and weave in/seal the tails.
chest detail
(dark gray)
Ch 3, (starting from 2nd ch from hook) 2slst
Fasten off and seal the tails.
5
body
(dark gray, gray)
R1: (in dark gray) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5-R7: sc around (3 rounds) [24]
R8: 8sc, (change to gray) 3sc, (change to dark gray) 2sc,
(change to gray) 3sc, (change to dark gray) 8sc [24]
R9: 8sc, (change to gray) 8sc, (change to dark gray) 8sc [24]
R10: (dec, 2sc) x2, (change to gray) (dec, 2sc) x2, (change to
dark gray) (dec, 2sc) x2 [18]
R11: sc around [18]
Sl st, fasten off, leave a tail for sewing and stuff firmly.
legs (make 2)
(black)
R1: (in black) 6sc in magic ring [6]
R2: inc x6 [12]
R3: BLO, sc around [12]
R4: sc around [12]
R5: (change to dark gray) (dec, 4sc) x2 [10]
R6: sc around [10]
R7: (dec, 3sc) x2 [8]
Sl st, fasten off, leave a tail for sewing and
stuff firmly.
6
arms (make 2)
(dark gray, gray)
R1: (in dark gray) 4sc in magic ring [4]
R2: inc x4 [8]
R3-R7: (change to gray) sc around (5 rounds) [8]
Sl st, fasten off, leave a tail for sewing and stuff
lightly.
Embroider random lines using light blue yarn on
the gray part.
hood collar
(lavender)
- note: inc dc = 2dc in 1 st
Work in rows. Ch 1 and turn after each rows.
R1: Ch 29, (starting from 2nd ch from hook)
28sc [28]
R2: inc, 6sc, inc, 3sc, hdc, 2dc, tc, inc dc, hdc,
2sc, slst then cut off the yarn, leaving the re-
maining stitches. [22]
Fasten off and weave in/seal off the tails.
cape
(lavender)
Work in rows. Ch 1 and turn after each rows.
Starting off by leaving a long tail for sewing or not leaving a tail and
just glue them later.
R1: ch 11, (starting from 2nd ch from hook) 10sc [10]
R2: sc, sk 1 st, 8sc [9]
R3: 7sc, sk 1 st, sc [8]
R4: sc, sk 1 st, 6sc [7]
R5: 5sc, sk 1 st, sc [6]
R6: sc, sk 1 st, 4sc [5]
R7: 3sc, sk 1 st, sc [4]
R8: sc, sk 1 st, hdc, dc [3]
Fasten off and weave in/seal the tails. 7
hood
(lavender)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 5sc) x3 [21]
R5: (inc, 6sc) x3 [24]
R6: (inc, 7sc) x3 [27]
R7: (inc, 8sc) x3 [30]
R8: (inc, 9sc) x3 [33]
R9: (inc, 10sc) x3 [36]
R10: (inc, 11sc) x3 [39]
R11: (inc, 12sc) x3 [42]
R12: (inc, 13sc) x3 [45]
R13: (inc, 14sc) x3 [48]
R14: (inc, 15sc) x3 [51]
R15: (inc, 16sc) x3 [54]
R16: (inc, 17sc) x3 [57]
R17: (inc, 18sc) x3 [60]
R18-R24: sc around (7 rounds) [60]
Sl st, fasten off and weave the tail in.
eye 1
(light blue)
Ch 8, (starting from 2nd ch from hook) slst,
5sc, slst
Fasten off and weave in/seal off the tails.
eye 2 (make 2)
(light blue)
Ch 6, (starting from 2nd ch from hook) slst,
3sc, slst
Fasten off and weave in/seal off the tails.
8
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the sewing.
I'm using a hot glue gun to attach some of the parts, but if you make
this amigurumi for kids, I recommend to make it fully sewn.
1 2 3
4. Sew the legs to the lower sides of the body. (If you wanna make
it stand, just sew the legs on the bottom of the body.)
5. This step is optional, I inserted a wire through the upper part of
the body for the arms.
(Not recommended if you make this amigurumi for kids.)
6. Sew the arms to the sides of the upper body.
4 5 6
9
7. Glue Eye 1 on the middle of the face, and both Eye 2 on the sides
of Eye 1, giving approximately 2sts apart from Eye 1..
8. Sew/glue the cape behind the body.
7 8
9. Place the hood collar surrounding the neck, and allign the pointy
side onto the left side of the chest. Then, sew/glue them into place.
10. Place the hood on the head diagonally like so:
9 10
11. Fold a little bit of the lower side of the hood like so, then glue it to
the hood collar.
12. Shape the hood and you’re done!
11 12
10
I hope you had fun making them! Don’t forget to leave a review and share
pictures of your creations and tag me on instagram @medaami, I'd really
appreciate it and I’d be really happy to see your creations!
11
cypher
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
This pattern is originally designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. However, you
may sell the finished product in SMALL mass but please clearly credit Medaami
as the pattern designer. Thank you for understanding!
Have fun! :)
2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in black, ivory, bronze, navy, pastel turqoise, and brown
colour
- Crochet hook that matches the size of your yarn
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun (recommended) or fabric glue
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Cypher turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet slst = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
htc = half triple crochet
tc = triple crochet
inc = 2 sc in 1 st
dec = 1 sc in 2 st
[...] = a total of [...] stitches on that round
3
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
4
cypher PATTERN
HEAD
(black)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R18: sc around (10 rounds) [48]
R19: (dec, 6sc) x6 [42]
R20: (dec, 5sc) x6 [36]
R21: (dec, 4sc) x6 [30]
R22: (dec, 3sc) x6 [24]
Stuff firmly.
R23: (dec, 2sc) x6 [18]
Sl st, fasten off, weave the tail in, add more stuffing if needed.
collar
(ivory)
Work in rows. Ch 1 and turn after each rows.
R1: Ch 25, (starting from 2nd ch from hook)
24sc [24]
R2: (inc, 3sc) x6 [30]
R3: (inc, 4sc) x6 [36]
R4: (inc, 5sc) x6 [42]
Fasten off and leave a tail for sewing.
5
body
(black, ivory, navy)
R1: (in black) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6: (change to ivory) sc around [24]
R7: BLO, sc around [24]
R8-R9: sc around (2 rounds) [24]
R10: (dec, 2sc) x2, dec, (change to navy) 2sc, (change to
ivory) (dec, 2sc) x3 [18]
R11: 7sc, (change to navy) 3sc, (change to ivory) 8sc [18]
Sl st, fasten off, leave a tail for sewing and stuff firmly.
6
legs (make 2)
(black)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: BLO, sc around [12]
R4: FLO, sc around [12]
Flip the upper part inside out to make it
easier to work with (so the back loops will
show up).
R5: (crochet into the back loops on R4) 5sc,
sk 1 st, 5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Sl st, fasten off, leave a tail for sewing and
stuff firmly.
arms (make 2)
(navy, ivory, black)
R1: (in navy) 4sc in magic ring [4]
R2: inc x4 [8]
R3-R4: (change to ivory) sc around (2 rounds) [8]
R5: (change to black) sc around [8]
R6-R7: (change to ivory) sc around (2 rounds) [8]
Sl st, fasten off, leave a tail for sewing and stuff
lightly
Belt
(brown)
Ch 29
Fasten off and weave in/seal the tails.
7
body details (make 2)
(brown)
Ch 3, (starting from 2nd ch from hook) 2sc
Fasten off and seal the tails.
hat detail 1
(bronze)
Work in rows.
R1: ch 9, (starting from 2nd ch from hook), sl st, 6sc, sk last ch, ch 1
and turn [7]
R2: sc, sk 1 st, 2sc, sk 1 st, sc, sk last st, ch 1 and turn [4]
R3: sc, dec, sc, ch 1 and turn [3]
R4: sk 2 sts, sc, ch 1 and sl st to the first ch.
Fasten off, leave a tail for sewing or not leaving a tail and just glue
them later.
8
hat detail 2
(pastel turquoise)
6sc in magic ring
Slst, fasten off and weave in/seal off the tails.
hat
(ivory, navy, bronze)
R1: (in ivory) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9: BLO, sc around [48]
note:
R10: (inc, 15sc) x3 [51]
inc tc = 2tc in 1 st
R11: sc around [51]
R12: (inc, 16sc) x3 [54]
R13-R15: (change to navy) sc around (3 rounds) [54]
R16: (change to ivory) FLO, (inc, 8sc) x6 [60]
R17: (inc, 9sc) x2, inc, 3sc, hdc, 3dc, htc, tc, inc tc, htc, 3dc, hdc,
4sc, (inc, 9sc) x2 [66]
R18: (inc, 10sc) x2, inc, 7sc, hdc, dc, htc, inc tc, htc, dc, hdc, 7sc,
(inc, 10sc) x2 [72]
R19: (change to bronze) (11sc, inc) x6 [78]
Sl st, fasten off and leave a tail for sewing, or not leaving a tail
and just glue them later.
9
hat antenna
(bronze)
Ch 11, (starting from 2nd ch from hook) slst, 5sc,
4hdc
Fasten off, leave a tail for sewing or not leaving a
tail and just glue them later.
hat assembly
1. Sew/glue Hat Detail 1 on the middle of the hat, alligning it on the
navy line.
2. Glue Hat Detail 2 on top of Hat Detail 1.
3. Sew/glue Hat Antenna to the side of the hat, slightly tilted.
1 2 3
eyes (make 2)
(pastel turquoise)
Ch 6, (starting from 2nd ch from hook) sc, dc,
tc, dc, sc [5]
Fasten off and weave in/seal the tails.
10
Eye frame
(bronze)
Work in rows.
1) Ch 19, (starting from 2nd ch from hook) 18sc [18]
2) 8sc, ch 1 and turn, sc, sk 1 st, 4sc, sk 1 st, sc, ch 1 and turn.
3) sc, sk 1 st, 2sc, sk 1 st, sc, cut off yarn.
4) skip 2 stitches, then start to crochet the exact same pattern:
5) 8sc, ch 1 and turn, sc, sk 1 st, 4sc, sk 1 st, sc, ch 1 and turn.
6) sc, sk 1 st, 2sc, sk 1 st, sc, don’t cut off yarn.
7) Ch 1 and turn, then sc around the whole piece except the
middle part. For the middle part, you slst instead of sc. And to
make the upper sides pointy, you can dc instead of sc.
11
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the sewing.
I'm using a hot glue gun to attach some of the parts, but if you make
this amigurumi for kids, I recommend to make it fully sewn.
1 2
3. This step is optional, I inserted a wire through the upper part of
the body for the arms.
(Not recommended if you make this amigurumi for kids.)
4. Sew the arms to the sides of the upper body.
12
5. Using bronze yarn, embroider a line in the centre of the body, then
outlining a “V” shape outsice the navy color.
9. Place the cape collar surrounding the neck, then sew both ends to
connect them on the back.
10. Glue the belt around the belly area.
11. Glue the body details to the centre of the belt, and another one on
the side of the belly below the belt (on the skirt).
9 10 11
12. Glue each shoulder details on each shoulder.
13. Sew/glue the eye frame on the face
12 13
13
14. Sew/ glue the eyes on the eyeframe, slightly lower and facing
upwards.
15. Complete the look with the hat.
14 15
I hope you had fun making them! Don’t forget to leave a review and share
pictures of your creations and tag me on instagram @medaami, I'd really
appreciate it and I’d be really happy to see your creations!
14
jett
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
This pattern is originally designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. However, you
may sell the finished product in SMALL mass but please clearly credit Medaami
as the pattern designer. Thank you for understanding!
Have fun! :)
2
DIFFICULTY
Intermediate
materials
- Any yarn in beige, black, white, light blue, navy blue, light gray
and dark gray color
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use a 10mm eyes)
- A small amount of gray felt
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun (recommended) or fabric glue
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Jett turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet sl st = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
tc = triple crochet
inc = 2 sc in 1 st
dec = 1 sc in 2 st
3
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
4
jett PATTERN
HEAD
(beige)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Sl st, fasten off, weave the tail in, add more stuffing if needed.
5
body
(black, navy blue, light blue)
R1: (in black) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6: (change to light blue) 10sc, (change to navy blue)
4sc, (change to light blue) 10sc [24]
R7: 11sc, (change to navy blue) 3sc, (change to light
blue) 10sc [24]
R8-R9: sc around (2 rounds) [24]
R10: (dec, 2sc) x6 [18]
R11: sc around [18]
Sl st, fasten off, leave a tail for sewing and stuff
firmly.
legs (make 2)
(black, light blue)
R1: (in light blue) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (change to black) BLO, sc around [12]
R4: FLO, sc around [12]
Flip the upper part inside out to make it
easier to work with.
R5: (crochet into the back loops of R4) 5sc,
sk 1 st, 5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Sl st, fasten off, leave a tail for sewing and
stuff firmly.
6
arms (make 2)
(beige, dark gray)
R1: (in beige) 4sc in magic ring [4]
R2: (change to dark gray) inc x4 [8]
R3-R7: (change to beige) sc around (5 rounds) [8]
Sl st, fasten off, leave a tail for sewing and stuff
lightly
hoodie
(navy blue)
R1: 4sc in magic ring [4]
R2: inc x4 [8]
R3: (inc, 3sc) x2 [10]
R4: (inc, 4sc) x2 [12]
R5: (inc, 5sc) x2 [14]
R6: (inc, 6sc) x2 [16]
Sl st, fasten off and leave a tail for sewing.
hoodie collar
(navy blue)
Ch 34, (starting from 3rd ch from hook)
4dc, hdc, 27sc
Fasten off and leave a tail for sewing, or
not leaving a tail and just glue them
later.
7
hair base
(white)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
Sl st, fasten off and leave a tail for sewing.
Left hair
(white)
1) ch 19, (starting from 2nd ch from hook) 2 sl st,
3sc, hdc, 12dc
2) Turn to the other side and now you’re working
on the other loops of the chains that you made in
the beginning.
3) 12dc, hdc, 3sc, 2 sl st
Fasten off, leave a tail for sewing. or not leaving a
tail and just glue them later.
right hair
(white)
1) ch 23, (starting from 2nd ch from hook) 2 sl st,
3sc, hdc, 16dc
2) Turn to the other side and now you’re working
on the other loops of the chains that you made in
the beginning.
3) 16dc, hdc, 3sc, 2 sl st
Fasten off, leave a tail for sewing. or not leaving a
tail and just glue them later.
8
middle hair
(white)
Ch 9, (starting from 2nd ch from hook) 2 sl st, 3sc,
hdc, 2dc
Fasten off, leave a tail for sewing. or not leaving a
tail and just glue them later.
1 2
3. This step is optional, I inserted a wire through the upper part of
the body for the arms.
(Not recommended if you make this amigurumi for kids.)
4. Sew the arms to the sides of the upper body.
3 4
10
5. Glue the shoulder shields to the upper arms like so:
6 7
8. Sew the hair base diagonally like so:
11
9. Sew the ponytail slightly below the center of the hair base.
10. I cut small pieces of triangle from a black felt for the eyeliner, and
also added blushes on the cheeks using a mixture of pink and orange
eyeshadow.
9 10
11. Using navy blue yarn, ch 21, wrap it around the ponytail, then 2 sl st
to connect them.
12. Sew/glue the side hair(s) approximately 2sts apart from the eyes.
13. Sew/glue the middle hair on the line where the forehead meets
the hair base, slightly above it, right in the middle.
12 13 12
14. Sew/glue the right hair on the right side of the middle hair, then
down diagonally.
15. Sew/glue the left hair on the left side of the middle hair, then
backwards following the direction of the hair base.
16. Cut out a tiny piece of circle from gray felt, and glue it to the front
of the hoodie collar like so:
15 16
13
I hope you had fun making them! Don’t forget to leave a review and share
pictures of your creations and tag me on instagram @medaami, I'd really
appreciate it and I’d be really happy to see your creations!
14
killjoy
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
This pattern is originally designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. However, you
may sell the finished product in SMALL mass but please clearly credit Medaami
as the pattern designer. Thank you for understanding!
Have fun! :)
2
DIFFICULTY
Intermediate
materials
- Any yarn in beige, black, yellow, blue, gray, dark gray, purple and
dark mint color
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use a 10mm eyes)
- A strand of black wire
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun (recommended) or fabric glue
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Killjoy turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet sl st = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
inc = 2 sc in 1 st
dec = 1 sc in 2 st
[...] = a total of [...] stitches on that round
3
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
4
Killjoy PATTERN
HEAD
(beige)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Sl st, fasten off, weave the tail in, add more stuffing if needed.
5
body
(black, gray)
R1: (in black) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24]
R6-R9: (change to gray) sc around
(4 rounds) [24]
R10: (dec, 2sc) x6 [18]
R11: sc around [18]
Sl st, fasten off, leave a tail for
sewing and stuff firmly.
handkerchief
(dark gray)
Work in rows.
R1: ch 9, (starting from 2nd ch from hook), sl st, 6sc, sk last ch, ch 1
and turn [7]
R2: sc, sk 1 st, 2sc, sk 1 st, sc, sk last st, ch 1 and turn [4]
R3: sc, dec, sc, sc 1 and turn [3]
R4: sk 2 sts, sc, ch 1 and sl st to the first ch.
Fasten off, leave a tail for sewing or not leaving a tail and just glue
them later.
6
legs (make 2)
(black, dark mint)
R1: (in black) 6sc in magic ring [6]
R2: inc x6 [12]
R3: BLO, sc around [12]
R4: FLO, 4sc, (change to dark mint) 3sc,
(change to black) 5sc [12]
Flip the upper part inside out to make it easier
to work with (so the back loops will show up).
R5: (crochet into the back loops on R4) 5sc, sk 1
st, 5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Sl st, fasten off, leave a tail for sewing and stuff
firmly.
jacket base
(blue, yellow)
Work in rows.
We’re making the blue piece first.
R1: (in blue) ch 25, (starting from 2nd ch from
hook) 24sc, ch 1 and turn [24]
R2: sc in all sts [24]
Fasten off.
Now we’re making the yellow piece.
R1: (in yellow) ch 21, (starting from 2nd ch
from hook) 20sc, ch 1 and turn [20]
R2-R4: sc in all sts (3 rows)
R5: FLO, inc, 5sc, inc, 6sc, inc, 5sc, inc, ch 1
and turn [24]
R6: sc in all sts [24]
Fasten off.
7
Allign the blue piece on top of the yellow piece, then sc starting
from the right side, upper side, then left side. The direction is like
this:
When you reach the upper side, sc in both blue and yellow piece,
then continue down to the left side.
arms (make 2)
(yellow, black, beige)
We’re making the sleeves first.
R1: (in yellow) 5sc in magic ring [5]
R2: inc x5 [10]
R3-R5: sc around (3 rounds) [10]
R6: (dec, 3sc) x2 [8]
R7: sc around [8]
Sl st, fasten off, leave a tail for sewing and
stuff lightly
8
Now we’re making the hands.
R1: (in black) 3sc in magic ring [3]
R2: inc x3 [6]
R3: (change to beige) sc around [6]
Sl st, fasten off and leave a tail for sewing.
1 2 3
9
back hair
(black)
1) ch 39, (starting from 2nd ch from hook)
3hdc, 7dc
2) sk 2 ch, sl st, ch 11, (starting from 2nd ch from
hook), 3hdc, 7dc
3) Repeat step 2 seven more times, until you
have a total of 9 strands.
Fasten off, leave a tail for sewing. or not leaving
a tail and just glue them later.
front hair
(black)
1) ch 21, (starting from 2nd ch from hook) 2 sl st,
3sc, hdc, 14dc
2) Turn to the other side and now you’re working
on the other loops of the chains that you made in
the beginning.
3) 14dc, hdc, 3sc, 2 sl st
Fasten off, leave a tail for sewing. or not leaving a
tail and just glue them later.
10
beanie
(dark mint)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 5sc) x3 [21]
R5: (inc, 6sc) x3 [24]
R6: (inc, 7sc) x3 [27]
R7: (inc, 8sc) x3 [30]
R8: (inc, 9sc) x3 [33]
R9: (inc, 10sc) x3 [36]
R10: (inc, 11sc) x3 [39]
R11: (inc, 12sc) x3 [42]
R12: (inc, 13sc) x3 [45]
R13: (inc, 14sc) x3 [48]
R14: (inc, 15sc) x3 [51]
R15: (inc, 16sc) x3 [54]
R16-R20: sc around (5 rounds) [54]
R21: FLO, sc around [54]
R22-R25: sc around (4 rounds) [54]
R26: (dec, 16sc) x3 [51]
Sl st, fasten off and weave the tail in.
Fold the lower part of the beanie inside out until R21 where you
crochet FLO.
Backpack strap
(purple)
Ch 11, (starting from 2nd ch from hook) 10 sl st
Fasten off and seal the tails.
11
Backpack
(black)
R1: ch 6, (starting from 2nd ch from hook) 5sc, turn
to the other side and 5sc again, and now you’re
working in rounds [10]
R2-R4: sc around (3 rounds) [10]
R5: 2sc, insert little stuffing then sc the gap closed.
glasses
12
3) Bend it straight 5) Bend it 90°
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
13
1. Sew the body to the head.
2. Sew the legs to the lower sides of the body. (If you wanna make
it stand, just sew the legs on the bottom of the body.)
1 2
3. Sew/glue the handkerchief to the middle of the upper body.
4. Sew/glue the jacket base around the body.
3 4
5. This step is optional, I inserted a wire through the upper part of
the body for the arms.
(Not recommended if you make this amigurumi for kids.)
6. Sew the arms to the sides of the upper body.
5 6 14
7. Sew/glue the jacket details on both sleeves.
8. Don’t forget to push the arms in to make that “puffy” look.
9. Embroider the left eyebrow (you can embroider both eyebrows),
and I also added blushes on the cheeks using a mixture of pink and
orange eyeshadow.
7 8 9
10. Sew/glue the side hair(s), approximately 3sts apart from the eyes.
11. Sew/glue the front hair on the forehead, slightly to the right, down
diagonally.
10 11
12. Sew/glue the back hair to the lower side of the back head.
15
13. Sew/glue the beanie diagonally like so:
14. Glue the backpack strap in a “U” shape, then sew/glue the back-
pack on top of it.
15 16 17
17
yoru
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
IMPORTANT:
This pattern is originaly designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. Translating this
pattern is also strictly prohibited. However, you may sell the finished product in
SMALL mass but please clearly credit Medaami as the pattern designer. Thank
you for understanding!
2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in beige, black, electric blue, gray, dark gray, white and
orange colour
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use a 10mm eyes)
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Yoru turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet slst = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
tc = triple crochet
inc = increase (2sc in 1 st)
dec = decrease (sc in 2 st)
medaami 3
[...] = a total of [...] stitches on that round
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
medaami 4
yoru PATTERN
HEAD
(beige)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Slst, fasten off, weave the tail in, add more stuffing if needed.
waist detail
(black)
R1: ch 31, slst to the 1st chain to make a loop,
then slst around [30]
Fasten off and leave a tail for sewing, or not
leaving a tail and just glue them later.
medaami 5
body
(dark gray, blue, beige, white)
R1: (in dark gray) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: sc around [24] front back
R6: (change to blue) sc around [24]
R7: 22sc, (change to dark gray) 2sc [24]
R8: 2sc, (change to blue) 20sc, (change to dark gray) sc, (change
to white) sc [24]
R9: sc, (change to dark gray) sc, (change to blue) 9sc, (change to
beige) sc, (change to blue) 10sc, (change to dark gray) sc, (change
to white) sc [24]
R10: sc, (change to dark gray) sc, (change to blue) dec, 3sc, dec, sc,
(change to beige) 2sc, dec, (change to blue) 3sc, dec, 3sc, (change
to dark gray) sc, (change to blue) sc [20]
R11: sc, (change to dark gray) sc, (change to blue) 5sc, (change to
beige) dec, 3sc, (change to blue) 4sc, dec, 2sc [18]
R12: 2sc [2]
Slst, fasten off, leave a tail for sewing and stuff firmly.
Now we’re gonna make the details on the back body.
1. Embroider 2 diagonal lines using white yarn on R7-R8 like so:
2. Embroider 2 diagonal lines using orange yarn on R9-R10 like so:
1 2
medaami 6
body detail
(blue, orange)
1. (in blue) ch 6, (starting from 2nd ch from hook) sc, dc, tc, dc, sc.
Cut off yarn.
2. (in orange) (starting from the dc that you first made) ch 1, inc, 2sc,
sc on the 1st ch that you made.
hair base
(black)
We will be making the hair strands during the assembly.
R1: 6sc in magic ring [6]
R2: BLO, inc x6 [12]
R3: BLO, (inc, sc) x6 [18]
R4: BLO, (inc, 2sc) x6 [24]
R5: BLO, (inc, 3sc) x6 [30]
R6: BLO, (inc, 4sc) x6 [36]
R7: BLO, (inc, 5sc) x6 [42]
R8: BLO, (inc, 6sc) x6 [48]
R9-R15: BLO, sc around (7 rounds) [48]
Slst, fasten off and leave a long tail for sewing.
medaami 7
legs (make 2)
(gray, dark gray, orange)
R1: (in gray) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (change to dark gray) BLO, sc around [12]
R4: (change to orange) FLO, sc around [12]
Flip the upper part inside out to make it easier to work
with (so the back loops will show up).
R5: (crochet into the back loops on R4) (change to
dark gray) 5sc, sk 1 st, 5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Slst, fasten off, leave a tail for sewing and stuff firmly.
arms (make 2)
(beige, black, blue, orange)
R1: (in beige) 4sc in magic ring [4]
R2: (change to black) inc x4 [8]
R3: (change to blue) sc around [8]
R4: 2sc, (change to orange) 4sc, (change to blue) 2sc [8]
R5: 2sc, (change to orange) sc, (change to blue) 2sc, (change to
orange) sc, (change to blue) 2sc [8]
R6: 2sc, (change to orange) 4sc, (change to blue) 2sc [8]
R7: sc around [8]
Slst, fasten off, leave a tail for sewing and stuff lightly
medaami 8
collar
(blue)
R1: ch 26, (starting from 2nd ch from hook) 2sc, 21hdc, 2sc [25]
Fasten off and leave a tail for sewing, or not leaving a tail and just
glue them later.
straps (make 4)
(orange)
Ch 4, (starting from 2nd ch from hook) 3slst [3]
Fasten off and leave a tail for sewing, or not
leaving a tail and just glue them later.
front hair 1
(blue)
Ch 13, (starting from 2nd ch from hook) 2slst, 3sc,
2hdc, 4dc, slst [12]
Ch 1 and continue to crochet to the other side of
the chains.
Slst, 4dc, 2hdc, 2sc, slst, sk the last 2 loops [10]
Fasten off and leave a tail for sewing, or not leaving
a tail and just glue them later.
medaami 9
front hair 2
(blue)
Ch 11, (starting from 2nd ch from hook) slst, 2sc,
hdc, 3dc, 2tc, slst [10]
Fasten off and leave a tail for sewing, or not
leaving a tail and just glue them later.
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
1 2
medaami 10
3. Sew/glue the body detail right above the dark gray area on the
front body like so:
4. Place the waist detail around the body, covering the line where
the dark gray meets the blue like so, and glue/sew it in place.
3 4
5. Sew the legs to the lower sides of the body. (If you wanna make it
stand, just sew the legs on the bottom of the body.)
6. This step is optional, I inserted a wire through the upper part of the
body for the arms. (Not recommended if you make this amigurumi
for kids)
5 6
A B
medaami 12
C) Work in rows, ch 1 and turn after each rows:
R1: 8sc [8]
R2: sc in all sts [8]
R3: sc, sk 1 st, 4sc, sk 1 st, sc [6]
R4-R5: sc in all sts (2 rows) [6]
R6: sc, sk 1 st, 2sc, sk 1 st, sc [4]
R7: sc in all sts [4]
R8: sc, dec, sc [3]
R9: sc, sk 1 st. sc [2]
R10: sk 1 st, sc [1] (sc down to R1)
Sc down to R1.
F) Repeat step E one more time and you now have a total of 4 hair
strands (2 hair strands alligned in the middle of the face).
medaami 13
G) Repeat step C two times and you now
have a total of 6 hair strands for the first
layer of the hair.
I K L
medaami 14
M) Now we’re going to make the 3rd hair
layer on R4 of the hair base, starting from
the loop that is alligned on the centre of the
back body.
11. Sew/glue the Side Hairs on the sides of the face, approximately 3sts
away from the eyes.
12. Sew/glue Front Hair 2 on the centre of the forehead, slightly to the
left.
11 12
medaami 15
13. Sew/glue Front Hair 1 on the centre of the forehead, slightly to the
right, and above Front Hair 2.
14. (optional) Add blush to make him cuter.
13 14
I hope you had fun making them! Don’t forget to leave a review and share
pictures of your creations and tag me on instagram @medaami, I'd really
appreciate it and I’d be really happy to see your creations!
medaami 16
viper
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
This pattern is originally designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. However, you
may sell the finished product in SMALL mass but please clearly credit Medaami
as the pattern designer. Thank you for understanding!
Have fun! :)
2
DIFFICULTY
Intermediate
materials
- Any yarn in beige, black, light green, melon green, bud green and
dark gray color
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use a 10mm eyes)
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun (recommended) or fabric glue
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Viper turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet slst = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
inc = increase (2 sc in 1 st)
dec = decrease (1 sc in 2 st)
[...] = a total of [...] stitches on that round
3
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
4
viper PATTERN
HEAD
(beige, black)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R15: sc around (7 rounds) [48]
R16: 24sc, (change to black) sc, (change to beige) 23sc [48]
R17: 23sc, (change to black) 4sc, (change to beige) 21sc [48]
R18: (dec, 6sc) x2, dec, 4sc, (change to black) 2sc, dec, 2sc,
(change to beige) 4sc, (dec, 6sc) x2 [42]
R19: (change to black) (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Sl st, fasten off, weave the tail in, add more stuffing if needed.
5
body
(black, light green)
R1: (in black) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: 9sc, (change to light green) 6sc, (change to black) 9sc [24]
R6: 9sc, (change to light green) 7sc, (change to black) 8sc [24]
R7-R8: 10sc, (change to light green) 6sc, (change to black) 8sc (2
rounds) [24]
R9: 11sc, (change to light green) 5sc, (change to black) 8sc [24]
R10: (dec, 2sc) x3 (change to light green) dec, 2sc, (change to
black) (dec, 2sc) x2 [18]
R11: sc around [18]
Sl st, fasten off, leave a tail for sewing and stuff firmly.
legs (make 2)
(black, dark gray)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: BLO, sc around [12]
R4: FLO, sc around [12]
Flip the upper part inside out to make it easier
to work with (so the back loops will show up).
R5: (crochet into the back loops on R4) 5sc, sk 1
st, 5sc, sk 1 st [10]
R6: 4sc, (change to dark gray) 2sc, (change to
black) 4sc [10]
R7: sc around [10]
R8: (dec, 3sc) x2 [8]
Sl st, fasten off, leave a tail for sewing and stuff
firmly.
6
arms (make 2)
(black)
R1: 4sc in magic ring [4]
R2: inc x4 [8]
R3-R7: sc around (5 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff
lightly
On the other arm, embroider a line that looks like an inverted “S”
shape, that goes from the front to the back like so:
collar detail
(black)
Work in rows.
R1: ch 6, (starting from 2nd ch from hook)
5sc [5]
R2: inc, 3sc, inc [7]
Fasten off and leave a tail for sewing, or not
leaving a tail and just glue them later.
7
belt
(black)
R1: ch 31, sl st to the 1st chain to make a loop,
then slst around [30]
Fasten off and leave a tail for sewing, or not
leaving a tail and just glue them later.
belt detail 1
(black)
Ch 13, (starting from 2nd ch from hook) 12 slst.
Fasten off and leave a tail for sewing, or not
leaving a tail and just glue them later.
belt detail 2
(dark gray)
Ch 3, (starting from 2nd ch from hook) 2 slst.
Fasten off and weave in/seal off the tails.
backpack
(melon green, black)
R1: (in melon green) 4sc in magic ring [4]
R2: inc x4 [8]
R3: (change to black) (inc, sc) x4 [12]
R4: sc around [12]
R5: (dec, sc) x4 [8]
Slst, fasten off and leave a tail for sewing, or not
leaving a tail and just glue them later.
hair base
(black)
We will be making the hair strands during the assembly.
R1: 6sc in magic ring [6]
R2: BLO, inc x6 [12]
R3: BLO, (inc, sc) x6 [18]
R4: BLO, (inc, 2sc) x6 [24]
R5: BLO, (inc, 3sc) x6 [30]
R6: BLO, (inc, 4sc) x6 [36]
R7: BLO, (inc, 5sc) x6 [42]
R8: BLO, (inc, 6sc) x6 [48]
R9-R15: BLO, sc around (7 rounds) [48]
Sl st, fasten off and leave a long tail for sewing.
9
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
1 2 3
4 5 6
10
7. Sew the legs to the lower sides of the body. (If you wanna make it
stand, just sew the legs on the bottom of the body.)
8. Glue the chest details on the chest and towards the armpits.
7 8
9. Sew/glue the collar detail on the upper body, right below the
head.
10. Sew/glue the shoulder shields on the upper arms like so:
9 10
11. Now we’ll smoothen out the mask on the face. Make 33 chains and
seal off the tails. Glue it to the face, following the line of the mask,
starting from the left side of the face to the right side. Don’t apply
too much glue so it will turn out neat.
11
12. Sew/glue the backpack to the upper side of the back body.
13. Sew the hair base diagonally like so:
12 13
14. Using ball point pins, mark your hair line starting from the right side
(approximately 4sts away from the middle st) and to the back.
15. We’re now gonna make the right side of the hair first, which is the
shorter strands of hair:
A. Ch 21 on the loop that you put your first ball point pin.
B. (starting from 2nd chain from hook) slst, 2sc, hdc, 16dc [20]
C. Skip 2 loops, slst on the 3rd loop towards the next ball point pins.
A B C
12
D. Repeat step A to C two more times, and now you have a total of 3
strands of hair.
E. Continue: ch 19, (starting from 2nd chain from hook) slst, 2sc, hdc,
14dc [18], skip 2 loops, slst.
F. ch 17, (starting from 2nd chain from hook) slst, 2sc, hdc, 12dc [16],
skip 2 loops, slst.
G. ch 15, (starting from 2nd chain from hook) slst, 2sc, hdc, 10dc [14],
skip 2 loops, slst.
H. ch 15, (starting from 2nd chain from hook) slst, 2sc, hdc, 10dc [14],
skip 2 loops, slst to the same level of the loop that you slst before
starting step G.
same level
D E. F. G H
I. Now we’re gonna start making the left side of the hair, which is the
longer strands of hair. From your current position, slst all the way to
the loop that you slst before starting step G, and you’ll start making
the longer strands from here.
J. Continue: ch 23, (starting from 2nd chain from hook) slst, 2sc, hdc,
18dc [22], slst to the exact same loop that you slst for the shorter
strands (now you don’t have to estimate where to slst anymore, just
slst to the same loops that you did for the shorter strands, so both
shorter and longer strands will line across).
K, L, G H
16. Arrange the hair strands using ball point pins then glue them to the
hair base. For the extra hair strand, I glue them slightly to the back,
overlapping the other hair strand.
17 18 19
15
I hope you had fun making them! Don’t forget to leave a review and share
pictures of your creations and tag me on instagram @medaami, I'd really
appreciate it and I’d be really happy to see your creations!
16
chamber
inspired
pattern by Medaami
Hi there! Thank you for purchasing this pattern! :)
IMPORTANT:
This pattern is originaly designed by Medaami and is for personal use only. DO
NOT duplicate, sell or distribute this pattern in any sort of ways. Translating this
pattern is also strictly prohibited. However, you may sell the finished product in
SMALL mass but please clearly credit Medaami as the pattern designer. Thank
you for understanding!
2
DIFFICULTY
INTERMEDIATE
materials
- Any yarn in beige, black, dark gray, gray, navy blue, maroon,
white, tan/bronze, purple and neon pink colour
- Crochet hook that matches the size of your yarn
- A pair of safety eyes and washer (I use 10mm eyes)
- A strand of wire for the glasses (I use 1.5mm of wire)
- Tapestry/yarn needle
- Stitch marker
- Scissors
- Stuffing
- A hot glue gun
SIZE
I used Bali cotton yarn in size #2 (sport) and a 2.50mm crochet
hook. My Chamber turned out approximately 12cm (3.4") tall.
ABBREVIATIONS
R = round/row BLO = back loop only
ch = chain FLO = front loop only
st(s) = stitch(es) sk = skip
sc = single crochet slst = slip stitch
hdc = half double crochet x(...) = repeat (...) times
dc = double crochet
tc = triple crochet
inc = increase (2sc in 1 st)
dec = decrease (sc in 2 st)
medaami 3
[...] = a total of [...] stitches on that round
Sealing method
I often use this method to get rid of some tails because it saves
more time than weaving the tails in one by one. However, make
sure the area that you want to “seal” is not visible, thus, not making
it ugly.
1. Hold the tail to your piece. If you have more than 1 tail, you can
twist it to become one.
2. Apply a small amount of hot glue gun, quickly and carefully press
it using a metal flat object, I’m using my scissors.
medaami 4
chamber PATTERN
HEAD
(beige)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
R18: (dec, 6sc) x6 [42]
R19: (dec, 5sc) x6 [36]
R20: (dec, 4sc) x6 [30]
Insert the eyes (I inserted it between round 16 and 17, and
about 10 sts in between), snap the washer in and stuff firmly.
R21: (dec, 3sc) x6 [24]
R22: (dec, 2sc) x6 [18]
Slst, fasten off, weave the tail in, add more stuffing if needed.
waist detail
(tan/bronze)
Ch 3, (starting from 2nd ch from hook) 2 slst.
Fasten off and weave in/seal off the tails.
medaami 5
body
(black, gray, navy, purple, neon pink, white)
R1: (in black) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (change to gray) sc around [24]
R6-R8: (change to navy) sc around (3 rounds) [24]
R9: 11sc, (change to pink) sc, (change to navy) 12sc [24]
R10: (dec, 2sc) x2, dec, sc, (change to pink) sc, dec, (change to
navy) 2sc, (dec, 2sc) x2 [18]
R11: 7sc, (change to white) sc, (change to purple) 2sc, (change to
white) sc, (change to navy) 7sc [18]
Slst, fasten off, leave a tail for sewing and stuff firmly.
Now we’re gonna make the details on the front body.
1. Using tan/bronze yarn, embroider 2 horizontal lines on R7-R8.
2. Using the same yarn, pull out the yarn on R10, right below the white
color. Insert it on the other side but don’t pull it too tight.
3. Pull out the yarn again slightly below R10 then insert the yarn in the
same hole to secure the curve.
4. You can embroider 2 lines using neon pink color below the curve
line that we made previously to make the pink colour more visible.
5. Glue the waist detail on the middle of the gray area of the body.
1 2 3
(more pictures on the next page) medaami 6
4 5
hair base
(dark gray)
R1: 6sc in magic ring [6]
R2: inc x6 [12]
R3: (inc, sc) x6 [18]
R4: (inc, 2sc) x6 [24]
R5: (inc, 3sc) x6 [30]
R6: (inc, 4sc) x6 [36]
R7: (inc, 5sc) x6 [42]
R8: (inc, 6sc) x6 [48]
R9-R17: sc around (9 rounds) [48]
Slst, fasten off and leave a tail for sewing.
left collar
(navy)
R1: ch 5, (starting from 2nd ch from hook)
hdc, sc, 2slst [4]
Fasten off and leave a tail for sewing, or not
leaving a tail and just glue them later.
right collar
(navy)
R1: ch 5, (starting from 2nd ch from hook)
2slst, sc, hdc [4]
Fasten off and leave a tail for sewing, or not
medaami 7
leaving a tail and just glue them later.
legs (make 2)
(dark gray, gray, black)
R1: (in dark gray) 6sc in magic ring [6]
R2: inc x6 [12]
R3: (change to gray) BLO, sc around [12]
R4: FLO, sc around [12]
Flip the upper part inside out to make it easier to work with (so the
back loops will show up).
R5: (crochet into the back loops on R4) (change to black) 5sc, sk 1 st,
5sc, sk 1 st [10]
R6-R7: sc around (2 rounds) [10]
R8: (dec, 3sc) x2 [8]
Slst, fasten off, leave a tail for sewing and stuff firmly.
arms (make 2)
(beige, maroon, white)
R1: (in beige) 4sc in magic ring [4]
R2: (change to maroon) inc x4 [8]
R3: (change to beige) sc around [8]
R4-R7: (change to white) sc around (4 rounds) [8]
Slst, fasten off, leave a tail for sewing and stuff lightly
line a
(tan/bronze)
R1: ch 25, (starting from 2nd ch from hook) 24slst [24]
Fasten off and leave a tail for sewing, or not leaving a tail and just
glue them later.
line B
(tan/bronze)
R1: ch 33, (starting from 2nd ch from hook) 32slst [32]
Fasten off and leave a tail for sewing, or not leaving a tail and just
medaami 8
glue them later.
line c
(tan/bronze)
R1: ch 39, (starting from 2nd ch from hook) 38slst [38]
Fasten off and leave a tail for sewing, or not leaving a tail and just
glue them later.
hair A
(black)
Work in rows. Ch 1 and turn after each rows.
R1: ch 3, (starting from 2nd ch from hook) 2sc [2]
R2: inc x2 [4]
R3: inc, 2sc, inc [6]
R4: inc, 4sc, inc [8]
R5-R14: sc in all sts (10 rows) [8]
R15: dec, 4sc, dec [6]
R16-R19: sc in all sts (4 rows) [6]
R20: dec, 2sc, dec [4]
R21: sc in all sts [4]
R22: sk 1 st, sc, sk 1 st, sc [2]
R23: sk 1 st, sc [1]
Sc around the whole piece in this direction:
Fasten off, leave a tail for sewing. or not leaving a tail and just glue
them later.
medaami 9
hair B
(black)
Work in rows. Ch 1 and turn after each rows.
R1: ch 3, (starting from 2nd ch from hook) 2sc [2]
R2: inc x2 [4]
R3: inc, 2sc, inc [6]
R4: inc, 4sc, inc [8]
R5: inc, 6sc, inc [10]
R6: inc, 8sc, inc [12]
R7: inc, 2sc, inc, 4sc, inc, 2sc, inc [16]
R8: inc, 14sc, inc [18]
R9-R15: sc in all sts (7 rows) [18]
R16: dec, 14sc, dec [16]
R17: sc in all sts [16]
R18: dec, 12sc, dec [14]
R19: dec, 10sc, dec [12]
R20: dec, 8sc, dec [10]
R21: dec, 6sc, dec [8]
R22: dec, 4sc, dec [6]
R23: dec, 2sc, dec [4]
R24: sk 1 st, sc, sk 1 st, sc [2]
R25: sk 1 st, sc [1]
Sc around the whole piece in this direction:
Fasten off, leave a tail for sewing. or not leaving a tail and just glue
medaami 10
them later.
glasses
Prepare your wire and any square object that can help you to shape
the wire to form a glasses. If you don’t have it, you can just use any
circular object and just shape them using pliers later. Also, make sure
the object fits the size of your Chamber’s face.
medaami 11
5) Bend it 90° 8) Shape the circle into squares
using pliers.
medaami 12
assembly
I recommend to use ball point pins for assembly. This way will help
you to keep the pieces in place and make it easier to do the
sewing.
I'm using a hot glue gun to attach some of the parts, but if you
make this amigurumi for kids, I recommend to make it fully sewn.
1 2
3 4
medaami 13
5. Glue the right collar outlining the right side “V” shape on the chest.
6. Glue the left collar outlining the left side “V” shape on the chest.
5 6
7. Sew the hair base diagonally like so:
8. Using ball point pins, arrange Line A on the right side of the fore-
head like so:
7 8
9. Glue Line A in place.
10. Sew/glue Hair B on the middle of the forehead, with the pointy
side approximately 2 rounds below the hair base.
11. Sew/glue Hair A above Hair B.
medaami 14
9 10 11
12. Using ball point pins, arrange Line B on the side to the back of the
head like so:
13. Glue Line B in place.
12 13
14. Using ball point pins, arrange Line C on the side to the back of the
head like so:
15. Glue Line C in place.
16. (optional) Add blush to make him cuter.
14 15 16
17. Bend one of the glasses ends like so:
18. Insert it to one side of the face.
19. Insert the other end to the face, then bend it when it’s inside the
face.
17 18 medaami
19 15
And.. You’re done!
I hope you had fun making them! Don’t forget to leave a review and share
pictures of your creations and tag me on instagram @medaami, I'd really
appreciate it and I’d be really happy to see your creations!
medaami 16