Professional Documents
Culture Documents
(1001CJA101021230070) )1001CJA101021230070)
English
Please see the last page of this booklet for rest of the instructions
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
ALLEN ®
SOME USEFUL CONSTANTS
Atomic No. : H = 1, B = 5, C = 6, N = 7, O = 8, F = 9, Al = 13, P = 15, S = 16,
Cl = 17, Br = 35, Xe = 54, Ce = 58
Atomic masses : H = 1, Li = 7, B = 11, C = 12, N = 14, O = 16, F = 19, Na = 23, Mg = 24,
Al = 27, P = 31, S = 32, Cl = 35.5, Ca=40, Fe = 56, Br = 80, I = 127,
Xe = 131, Ba=137, Ce = 140
E-2/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
PART-1 : PHYSICS
SECTION-I (i) : (Maximum Marks: 24)
This section contains SIX (06) questions.
Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is (are)
correct answer(s).
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen.
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen
and both of which are correct.
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it
is a correct option.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –2 In all other cases.
For Example : If first, third and fourth are the ONLY three correct options for a question with
second option being an incorrect option; selecting only all the three correct options will result in
+4 marks. Selecting only two of the three correct options (e.g. the first and fourth options), without
selecting any incorrect option (second option in this case), will result in +2 marks. Selecting only
one of the three correct options (either first or third or fourth option), without selecting any
incorrect option (second option in this case), will result in +1 marks. Selecting any incorrect
option(s) (second option in this case), with or without selection of any correct option(s) will result
in –2 marks.
1. Choose the incorrect ray diagram(s). All the rays shown are paraxial. [ denotes converging lens and
denotes diverging lens]
(A) (B)
(C) (D)
1001CJA101021230070 E-3/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
4
2. A beaker of radius r is filled with water (refractive index ) as shown in the figure on the left. The
3
beaker is kept on a horizontal table rotating with angular speed ω . This makes the water surface curved
so that the difference in the height of water level at the center and at the circumference of the beaker is h
(h << H, h << r), as shown in the figure on the right. Take this surface to be approximately spherical with
a radius of curvature R. Which of the following is/are correct? (g is the acceleration due to gravity)
(A) h 2 + r2
R=
2h
(B) 3r2
R=
2h
−1
(C) Apparent depth of the bottom of the beaker is close to 3H ω2 H
(1 + )
2 2g
−1
(D) Apparent depth of the bottom of the beaker is close to 3H ω2 H
( 1+ )
4 4g
3. Two particles are projected with speed 4 m/s and 3 m/s simultaneously from same point as shown in the
figure. Then :-
E-4/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
4. Two blocks of mass 6kg (A) and 3kg (B) are connected with a string passing over a pulley as shown. The
block 6kg lies on a horizontal rough surface. What can be the values of additional mass m placed on the
block A so that the system does not accelerate ? (The coefficient of friction between all surface is 0.3)
(A) 3 kg
(B) 6 kg
(C) 9 kg
(D) 12 kg
5. The separation between the objective and the eye piece of a compound microscope can be adjusted
between 9.8 cm to 11.8 cm. Focal length of the objective and the eyepiece are 1.0 cm and 6 cm
respectively. Eyepiece is moveable and image is always needed at 24 cm from the eye. D = 24 cm. Find
the minimum and maximum magnification which can be produced by the microscope.
(A) the minimum magnification is 20 and corresponds to the separation 9.8 cm between lenses.
(B) the minimum magnification is 20 and corresponds to the separation 11.8 cm between lenses.
(C) the maximum magnification is 30 and corresponds to the separation 9.8 cm between lenses.
(D) the maximum magnification is 30 and corresponds to the separation 11.8 cm between lenses.
6. Two free point charges +q and +4q are placed a distance x apart. A third charge is so placed that all the
three charges are in equilibrium. Then :-
(A) unknown charge is – 4q/9.
(B) unknown charge is – 9q/4.
(C) It should be at (x/3) from smaller charge between them.
(D) It should be placed at (2x/3) from smaller charge between them.
1001CJA101021230070 E-5/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
SECTION-I (ii) : (Maximum Marks: 12)
This section contains FOUR (04) questions.
This section contains TWO paragraphs.
Based on each paragraph, there are TWO questions
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is correct
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –1 In all other cases.
Paragraph for Questions 7 and 8
A particle moves in xy plane according to the equations x = α t and y = α t(1 – β t) where α and β are
positive constants and t is time.
7. Choose the CORRECT option in regards to trajectory (path) of the particle.
2α
(A) Trajectory of particle is symmetric about x =
β
β
(B) Equation of the trajectory (path) of the particle is y = x ( 1− x)
α
α
(C) Equation of the trajectory (path) of the particle is y = x ( 1− x)
β
E-6/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
9. If coefficient of friction between wedge & block is μ , the maximum acceleration of the wedge so that
block does not slip over wedge is :- (tan θ > μ )
μ + tan θ
(A) ( ) g
1 − μ tan θ
tan θ − μ
(B) ( ) g
1 + μ tan θ
m tan θ + M
(C) ( ) g
1 − μ tan θ
M − m tan θ
(D) ( ) g
1 + μ tan θ
10. For the situation in previous question, minimum value of acceleration is (tan θ > μ )
M − m tan θ
(A) [ ] g
1 + μ tan θ
M + m tan θ
(B) [ ] g
1 − μ tan θ
tan θ − μ
(C) [ ] g
1 + μ tan θ
μ + tan θ
(D) [ ] g
1 − μ tan θ
1001CJA101021230070 E-7/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
SECTION-II (i) : (Maximum Marks: 12)
This section contains THREE (03) question stems.
There are TWO (02) questions corresponding to each question stem.
The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value corresponding to the answer in the designated
place.
If the numerical value has more than two decimal places, truncate/round-off the value to TWO decimal
places.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +2 If ONLY the correct numerical value is entered at the designated place;
Zero Marks : 0 In all other cases.
Paragraph for Questions 1 and 2
A concave mirror of focal length 15 cm is divided into two parts and separated by 2 mm. A point object
at a distance of 20 cm starts moving at t = 0 with 1mm/s as shown.
1. Find the distance between images formed by two part at t = 0 (in mm) :-
2. Find rate of change of distance between images formed by two parts at t = 0 (in mm/s) :-
E-8/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
v0
3. The time when image of object disappears for the observer for first time is . Find n.
ng
4. What is the fraction of time of complete motion, for which observer will not observe object’s image?
Paragraph for Questions 5 and 6
Two charged small balls each of charge 'q' and mass 'm' when suspended from a common point by
strings of length ' ℓ ' in air, then these strings form an angle of 120° with each other. When the system is
1
immersed in a liquid of dielectric constant 'k' (relative density of liquid w.r.t. ball's material is ) then
3
the angle between the strings remain same. [electrostatic force between charged particle in medium is
1
given by times of force in vaccuum]
k
5. Find the dielectric constant of the liquid.
6. If the system (without liquid) is placed in a gravitational free space then angle between the strings will
be :- (in degrees)
1001CJA101021230070 E-9/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
SECTION-II (ii) : (Maximum Marks: 12)
This section contains THREE (03) questions.
The answer to each question is a NON-NEGATIVE INTEGER
For each question, enter the correct integer value of the answer in the place designated to enter the
answer.
For each question, marks will be awarded in one of the following categories :
Full Marks : +4 If only the correct answer is given.
Zero Marks : 0 In all other cases
7. A cylindrical bucket of depth 60 cm is partly filled with a liquid of refractive index 1.5 and with oil
(on top of liquid) of refractive index 2. It appears that the volume of air, volume of liquid and volume
of oil are equal, to an observer who views from top of the bucket. The apparent depth of the bucket
α
as seen by the observer is given as α cm. Fill ( ).
5
8. A bead of mass 2kg is fitted onto a rod with a length of 8m and can move on it with friction having the
coefficient of friction 0.5. At the initial moment the bead is in the middle of the rod. The rod moves
translationally in a horizontal plane with an acceleration 1m/sec2 in the direction forming an angle 37°
with the rod in gravity free region. Find the time (in sec) when the bead will leave the rod.
9. Consider the system shown in the figure. The system is so arranged that both m and M are in pure translation.
If at a certain instant M is moving down with a speed of 1 m/s then the speed of m will be (in m/s) :-
E-10/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
PART-2 : CHEMISTRY
SECTION-I (i) : (Maximum Marks: 24)
This section contains SIX (06) questions.
Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is (are) correct
answer(s).
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen.
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen and
both of which are correct.
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is a
correct option.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –2 In all other cases.
For Example : If first, third and fourth are the ONLY three correct options for a question with second
option being an incorrect option; selecting only all the three correct options will result in +4 marks.
Selecting only two of the three correct options (e.g. the first and fourth options), without selecting any
incorrect option (second option in this case), will result in +2 marks. Selecting only one of the three
correct options (either first or third or fourth option), without selecting any incorrect option (second
option in this case), will result in +1 marks. Selecting any incorrect option(s) (second option in this
case), with or without selection of any correct option(s) will result in –2 marks.
(C) Number of cation vacancies generated when NaCl is dopped with 1.58 gm SrCl2 completely is
6 × 1021 (Molar mass of SrCl2 = 158 gm/mole, NA = 6 × 1023)
(D) An element can exist in two different polymorphic crystalline forms of FCC and HCP solids.
The two solids have same void fraction, density and inter-planar spacing.
2. In a crystalline solid AB, B –2 ions form cubic close packing and A+2 ions occupy appropriate voids at alternate
positions. If radius of A+2 ion is 150 pm and that of B –2 ion is 450 pm, then correct statement(s) is/are :
[Assume that radius ratio rule in applicable]
(A) Coordination numbers of both anion and cation is 4
(B) Length of the body diagonal length of unit cell is 2400 pm
(C) 66.66% of total three dimensional voids in the solid are unoccupied
(D) Number of effective formula units of 'AB' per unit cell is one.
1001CJA101021230070 E-11/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
(A) (B)
(C) (D)
4. Which of the following molecule(s) have cationic and anionic forms in their solid state :
(A) N2O5
(B) PCl5
(C) PBr5
(D) XeF6
5. Which of the following will show immediate turbidity with Lucas reagent?
(A)
(B)
(C)
(D)
6. Select the correct hybridisation state of cationic and anionic part of given compounds respectively.
(A) PBr5(s) → sp3 & sp3d2
(B) N2O5(s) → sp & sp2
(C) Cl2O6(s) → sp2 & sp3
(D) I2Cl6( ℓ iq.) → sp3 & sp3d2
E-12/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
SECTION-I (ii) : (Maximum Marks: 12)
This section contains FOUR (04) questions.
This section contains TWO paragraphs.
Based on each paragraph, there are TWO questions
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is correct
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –1 In all other cases.
Paragraph for Questions 7 and 8
On the basis of given ionic crystal unit cell diagram for an ionic solid [AB], give answers to the
following questions :
1 × 97
(C)
6a3 × 10−7
2 × 97
(D)
6a3 × 10−7
1001CJA101021230070 E-13/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
∙∙
(A) 2
(B) 3
(C) 4
(D) 6
10. Number of the correct statement among the following
H2 O
(i) −−→ (Major product)
SN 1
(ii) SN2 reactivity : CH3I > CH3Br > CH3Cl > CH3F
(iii) Polar aprotic solvent favour SN1 reactions
(iv) SN2 reaction involves carbonium ion intermediate
(A) 2
(B) 3
(C) 4
(D) 1
E-14/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
SECTION-II (i) : (Maximum Marks: 12)
This section contains THREE (03) question stems.
There are TWO (02) questions corresponding to each question stem.
The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value corresponding to the answer in the designated
place.
If the numerical value has more than two decimal places, truncate/round-off the value to TWO decimal
places.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +2 If ONLY the correct numerical value is entered at the designated place;
Zero Marks : 0 In all other cases.
Paragraph for Questions 1 and 2
Electrophilic addition reaction characteristics reaction of alkene where a chemical compound
containing double bond and triple bond has a π bond broken, with the formation of the new σ bond.
Br
1. Cis-2-butene −−−2→ .
CCl4
Number of products obtained in this reaction.
2. Identify the reaction are correctly match with their major product -
(i)
(ii)
(iii)
(iv)
1001CJA101021230070 E-15/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
E-16/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
SECTION-II (ii) : (Maximum Marks: 12)
This section contains THREE (03) questions.
The answer to each question is a NON-NEGATIVE INTEGER
For each question, enter the correct integer value of the answer in the place designated to enter the
answer.
For each question, marks will be awarded in one of the following categories :
Full Marks : +4 If only the correct answer is given.
Zero Marks : 0 In all other cases
7. The mass (in gram) of a non-volatile, non-electrolyte solute (molar mass = 50 g mol –1) needed to be
dissolved in 114 g octane (molar mass = 114 gm/mole) to reduce its vapour pressure by 75%, is :-
8. Total number of hybrid orbital of central atom used in anionic part of molten I2.
9. How many approx 90° bond angle present in cationic part of solid XeF6.
1001CJA101021230070 E-17/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
PART-3 : MATHEMATICS
SECTION-I (i) : (Maximum Marks: 24)
This section contains SIX (06) questions.
Each question has FOUR options. ONE OR MORE THAN ONE of these four option(s) is (are) correct
answer(s).
For each question, choose the option(s) corresponding to (all ) the correct answer(s)
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +4 If only (all) the correct option(s) is (are) chosen.
Partial Marks : +3 If all the four options are correct but ONLY three options are chosen.
Partial Marks : +2 If three or more options are correct but ONLY two options are chosen and
both of which are correct.
Partial Marks : +1 If two or more options are correct but ONLY one option is chosen and it is a
correct option.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –2 In all other cases.
For Example : If first, third and fourth are the ONLY three correct options for a question with second
option being an incorrect option; selecting only all the three correct options will result in +4 marks.
Selecting only two of the three correct options (e.g. the first and fourth options), without selecting any
incorrect option (second option in this case), will result in +2 marks. Selecting only one of the three
correct options (either first or third or fourth option), without selecting any incorrect option (second
option in this case), will result in +1 marks. Selecting any incorrect option(s) (second option in this
case), with or without selection of any correct option(s) will result in –2 marks.
(C) lim
x→1
f(x) = does not exist (D) lim
x→3
f(x) = 1
2. Which of the limit is/are equal to unity ?
(Where [.] denotes G.I.F.)
2
esin 2x − esin x ex − cos x
(A) lim (B) lim 2 ( )
x→0 x x→0 x2
tan 2x e x ℓn ( 2 )
limπ (tan x)
(C) x→ (D) lim e [
ex
]
4 x→∞
E-18/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
∞
2
3. The value of ∑ tan−1 ( ) is NOT equal to -
n=1 n2 + 2n + 1
–1
(A) tan (1)
(B) tan –1(2)
(C) tan –1(3)
(D) tan –1(4)
4. If α & β are the roots of the equation x2 – 3x – 5 = 0, then -
(A) α 3 + β 3 = 72
(B) 5 + 3 α + β 2 = 19
(C) α 3 – 6 α 2 + 4 α = 15
α3 β − 3α2 β
(D) =1
αβ 3 − 3αβ 2
5. A function f : R → R, defined as f(x) = x3 – 12x2 + 48x – 60. If solutions of the equation f(x) = f –1(x)
are a, b, c where, a < b < c and [.] denotes G.I.F. and {.} denotes fractional part function
(A) [a + c ÷ b] = 2
(B) [a + c ÷ b] = 4
(C) {b + c ÷ a} = 0
(D) {b + c ÷ a} = 0.6̄
6. If values of 'm' for which the roots of quadratic equation x2 + 2(m – 1)x + (m + 5) = 0 are smaller than 3, is
8
given by set ( − , a] ∪ [b, ∞). Then which of the following is/are correct ?
7
(A) a + b = 5
(B) a + b = 3
(C) b – a = 5
(D) b – a = 3
1001CJA101021230070 E-19/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
SECTION-I (ii) : (Maximum Marks: 12)
This section contains FOUR (04) questions.
This section contains TWO paragraphs.
Based on each paragraph, there are TWO questions
Each question has FOUR options (A), (B), (C) and (D). ONLY ONE of these four options is correct
For each question, choose the option corresponding to the correct answer.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +3 If ONLY the correct option is chosen.
Zero Marks : 0 If none of the options is chosen (i.e. the question is unanswered).
Negative Marks : –1 In all other cases.
Paragraph for Questions 7 and 8
If a = sin –1(sin(10)) + cos –1(cos(10))
1
b = cot –1 ( − ) – cot –1(5)
5
π 9π
c = cos –1 ( sin( )) + tan(tan
−1
( ))
7 14
7. The value of a + d is -
(A) 0 (B) π
(C) 5 π (D) 7 π
8. The value of c – 2b is -
(A) 0 (B) π
(C) 5 π (D) 7 π
Paragraph for Questions 9 and 10
Let A = log8 ( log3 √
4
√27), B = (p + q + r + s), (p, q, r ∈
3
R)
where (p – 2)2 + (q – r)2 + (r – s)2 + (q + r + s – 12)2 ≤ 0, C = 5(log102.log1050 + (log105)2), then
9. Which of the following is true -
(A) AB < C (B) AB > C
(C) 3C – A = B (D) 3C + A = 2B
10. Which of the following is true -
∣ AB ∣ ∣ AB ∣
(A) ∣ ∣ = 7 (B) ∣ ∣ = 5
∣ p ∣ ∣ p ∣
(C) A + C – q > 0 (D) A + C – q < 0
E-20/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
SECTION-II (i) : (Maximum Marks: 12)
This section contains THREE (03) question stems.
There are TWO (02) questions corresponding to each question stem.
The answer to each question is a NUMERICAL VALUE.
For each question, enter the correct numerical value corresponding to the answer in the designated
place.
If the numerical value has more than two decimal places, truncate/round-off the value to TWO decimal
places.
Answer to each question will be evaluated according to the following marking scheme:
Full Marks : +2 If ONLY the correct numerical value is entered at the designated place;
Zero Marks : 0 In all other cases.
Paragraph for Questions 1 and 2
⎧
⎪
a + bx , x<1
⎪
⎪
⎪
1001CJA101021230070 E-21/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
SECTION-II (ii) : (Maximum Marks: 12)
This section contains THREE (03) questions.
The answer to each question is a NON-NEGATIVE INTEGER
For each question, enter the correct integer value of the answer in the place designated to enter the
answer.
For each question, marks will be awarded in one of the following categories :
Full Marks : +4 If only the correct answer is given.
Zero Marks : 0 In all other cases
12 3 a
7. If cos−1 ( ) + sin
−1
( ) = tan
−1
( ) then a + b is - (where a & b are coprime numbers)
13 5 b
1/3 −1/2
8. lim x1/3 .
If x→∞ ( x2 + 1 ) ( ax2 + bx + c) = 2, then the value of 100a is
3
2x3 − (tan−1 x) 1
9. The number of possible value(s) of K for which x→∞
lim 8
= is ' λ '
−1
x3 cot |Kx| + K 2 x6 sin 1
− 3Kx3 2
π x3
then value of ' λ ' is -
E-22/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
ALLEN ®
Space for Rough Work
1001CJA101021230070 E-23/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
ALLEN ®
I have read all the instructions I have verified the identity, name and Form
number of the candidate, and that question
and shall abide by them.
paper and ORS codes are the same.
____________________________ ____________________________
Signature of the Candidate Signature of the Invigilator
egRoiw.kZ funZs 'k % ftu fo|kfFkZ;ksa ds QkWeZ uEcj 8 vadksa ds gSa] mUgs OMR esa QkWeZ uEcj ds igys nks 'kwU; Hkjuk gSA tSls fd] ;fn vkidk QkWeZ uEcj
12345678 gS] rks vkidks 0012345678 Hkjuk gSA
H-2/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
PART-1 : PHYSICS
SECTION-I (i) : (अधिकतम अंक: 24)
इस खंड में छः (06) प्रश्न हैं।
प्रत्येक प्रश्न के सही उत्तर (उत्तरों) के लिए चार विकल्प दिए गए हैं। इस चार विकल्पों में से एक या एक से अधिक विकल्प सही
है(हैं)।
प्रत्येक प्रश्न के लिए, प्रश्न का (के ) उत्तर देने हेतु सही विकल्प (विकल्पों) को चुने।
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा :
पूर्ण अंक : +4 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
आंशिक अंक : +3 यदि चारों विकल्प सही हैं परन्तु के वल तीन विकल्पों को चुना गया है।
आंशिक अंक : +2 यदि तीन या तीन से अधिक विकल्प सही हैं परन्तु के वल दो विकल्पों को चुना गया है और चुने हुए
दोनों विकल्प सही विकल्प हैं।
आंशिक अंक : +1 यदि दो या दो से अधिक विकल्प सही हैं परन्तु के वल एक विकल्प को चुना गया है और चुना हुआ
विकल्प सही विकल्प हैं।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –2 अन्य सभी परिस्थितियों में।
उदाहरण स्वरूप : यदि किसी प्रश्न के लिए के वल पहला, तीसरा एवं चौथा सही विकल्प हैं और दूसरा विकल्प गलत है; तो के वल
सभी तीन सही विकल्पों का चयन करने पर ही +4 अंक मिलेंगें। बिना कोई गलत विकल्प चुने (इस उदाहरण में दूसरा विकल्प) तीन
सही विकल्पों में से सिर्फ दो को चुनने पर (उदाहरणतः पहला तथा चौथा विकल्प) +2 अंक मिलेंगे। बिना कोई गलत विकल्प चुने
(इस उदाहरण में दूसरा विकल्प), तीन सही विकल्पों में से सिर्फ एक को चुनने पर (पहला या तीसरा या चौथा विकल्प) +1 अंक
मिलेंगे। कोई भी गलत विकल्प चुनने पर (इस उदाहरण में दूसरा विकल्प), –2 अंक मिलेंगे, चाहे सही विकल्प (विकल्पों) को चुना
गया हो या न चुना गया हो।
1. गलत किरण आरेख चुनिये। सभी किरणें उपाक्षीय है। [ अभिसारी लैन्स प्रदर्शित करता है तथा अपसारी लैन्स प्रदर्शित करता है।]
(A) (B)
(C) (D)
1001CJA101021230070 H-3/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
4
2. बांयी ओर प्रदर्शित चित्र में r त्रिज्या वाले एक बीकर को अपवर्तनांक वाले जल से भरा दर्शाया गया है। बीकर को कोणीय
3
चाल ω से घूर्णन कर रही एक क्षैतिज टेबल पर रखा गया है। इस कारण जल सतह इतनी वक्रीय हो जाती है कि बीकर के के न्द्र पर
तथा परिधि पर जल स्तर की ऊँ चाई में अंतर h (h << H, h << r) होता है, जैसा कि दाँयें चित्र में दर्शाया गया है। इसे लगभग
वक्रता त्रिज्या R वाली एक गोलीय सतह मानिये। निम्न में से सही विकल्प चुनिये। (g गुरूत्वीय त्वरण है।)
(A) h 2 + r2
R=
2h
2
(B) 3r
R=
2h
−1
(C) बीकर के आधार की आभासी गहराई लगभग 3H ω2 H
( 1+ ) है।
2 2g
−1
(D) बीकर के आधार की आभासी गहराई लगभग 3H ω2 H
(1 + ) है।
4 4g
3. दो कणों को समान बिन्दु से एक साथ 4 m/s तथा 3 m/s चाल से प्रक्षेपित किया जाता है, तो :-
H-4/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
4. चित्रानुसार एक घिरनी पर से होकर गुजर रही रस्सी से दो ब्लाॅक A(6kg) व B(3kg) जुड़े हुए हैं। 6 kg का ब्लाॅक खुरदरी क्षैतिज
सतह पर रखा हुआ है। ब्लाॅक A पर कितना अतिरिक्त द्रव्यमान m रखा जाये ताकि यह निकाय त्वरित न हो? सभी सतहों के मध्य
घर्षण गुणांक 0.3 है।
(A) 3 kg
(B) 6 kg
(C) 9 kg
(D) 12 kg
5. एक संयुक्त सूक्ष्मदर्शी के अभिदृश्यक तथा नेत्रिका के मध्य दूरी को 9.8 cm से 11.8 cm के मध्य समायोजित किया जा सकता है।
अभिदृश्यक तथा नेत्रिका की फोकस दूरी क्रमशः 1.0 cm तथा 6 cm है। नेत्रिका चलायमान है तथा प्रतिबिम्ब सदैव नेत्र से 24 cm
पर बनता है। D = 24 cm है। सूक्ष्मदर्शी द्वारा उत्पन्न न्यूनतम तथा अधिकतम आवर्धन है :-
(A) न्यूनतम आवर्धन 20 है तथा लैन्सों के मध्य संगत दूरी 9.8 cm है।
(B) न्यूनतम आवर्धन 20 है तथा लैन्सों के मध्य संगत दूरी 11.8 cm है।
(C) अधिकतम आवर्धन 30 है तथा लैन्सों के मध्य संगत दूरी 9.8 cm है।
(D) अधिकतम आवर्धन 30 है तथा लैन्सों के मध्य संगत दूरी 11.8 cm है।
6. दो स्वतंत्र बिन्दु आवेश +q और +4q एक दूसरे से x दूरी पर रखे हैं। एक तीसरा आवेश इस तरह से रखा जाता है कि निकाय
साम्यावस्था में है, तब :-
(A) अज्ञात आवेश – 4q/9 है।
(B) अज्ञात आवेश – 9q/4 है।
(C) यह दोनों आवेशों के बीच छोटे आवेश से x/3 दूरी पर होना चाहिए।
(D) यह दोनों आवेशों के बीच छोटे आवेश से 2x/3 दूरी पर होना चाहिए।
1001CJA101021230070 H-5/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
SECTION-I (ii) : (अधिकतम अंक: 12)
इस खण्ड में चार (04) प्रश्न हैं
इस खण्ड में दो अनुच्छेद हैं
प्रत्येक अनुच्छेद पर दो प्रश्न दिए गयें हैं।
प्रत्येक प्रश्न में चार उत्तर विकल्प (A), (B), (C) और (D) हैं जिनमें के वल एक सही हैं।
प्रत्येक प्रश्न के लिए सही उत्तर विकल्प के अनुरूप विकल्प को चुनें।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +3 यदि सिर्फ सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
प्रश्न 7 एवं 8 के लिये अनुच्छे द
एक कण xy तल में समीकरण x = α t तथा y = α t(1 – β t) के अनुसार गति करता है, जहाँ α तथा β धनात्मक नियतांक है
तथा t समय है।
7. कण के प्रक्षेप्य पथ के संदर्भ में सही कथन चुनिये।
2α
(A) कण का प्रक्षेप्य पथ x = के सापेक्ष सममित है।
β
β
(B) कण के प्रक्षेप्य पथ की समीकरण y = x ( 1− x) है।
α
α
(C) कण के प्रक्षेप्य पथ की समीकरण y = x ( 1− x) है।
β
(D) कण का प्रक्षेप्य पथ x = 2β
के सापेक्ष सममित है।
α
8. सही विकल्प चुनिये।
(A) किसी भी क्षण पर कण का त्वरण −4αβj^ है।
1 √ 5
(B) समय t = पर कण की चाल αm/s है।
4β 2
(C) समय t = 1 √ 5
पर कण की चाल βm/s है।
4β 2
(D) किसी भी क्षण पर कण का त्वरण −2αβi^ है।
H-6/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
9. यदि वेज तथा ब्लाॅक के मध्य घर्षण गुणांक μ हो तो वेज का अधिकतम त्वरण क्या होगा, ताकि ब्लाॅक वेज के ऊपर नहीं फिसले ?
(tan θ > μ )
μ + tan θ
(A) ( ) g
1 − μ tan θ
tan θ − μ
(B) ( ) g
1 + μ tan θ
m tan θ + M
(C) ( ) g
1 − μ tan θ
M − m tan θ
(D) ( ) g
1 + μ tan θ
10. पिछले प्रश्न की स्थिति में त्वरण का न्यूनतम मान क्या होगा? (tan θ > μ )
M − m tan θ
(A) [ ] g
1 + μ tan θ
M + m tan θ
(B) [ ] g
1 − μ tan θ
tan θ − μ
(C) [ ] g
1 + μ tan θ
μ + tan θ
(D) [ ] g
1 − μ tan θ
1001CJA101021230070 H-7/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
SECTION-II (i) : (अधिकतम अंक: 12)
इस खंड में तीन (03) प्रश्न स्तम्भ (QUESTION STEM) है।
प्रत्येक प्रश्न स्तम्भ से सम्बधित दो (02) प्रश्न है।
प्रत्येक प्रश्न का उत्तर एक संख्यातमक मान (Numerical Value) है।
प्रत्येक प्रश्न के उत्तर से संबंधित सही संख्यात्मक मान को उत्तर के लिए चिन्हित स्थान पर दर्ज करें।
यदि संख्यात्मक मान में दो से अधिक दशमलव स्थान है, तो संख्यात्मक मान को दशमलव के दो (02) स्थानों तक समेंटे/शून्यांश
करें (truncate/round–off)
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न योजना के अनुसार होगा :
पूर्ण अंक : +2 यदि के वल सही संख्यात्मक मान (numerical value) को ही सबंधित स्थान में दर्ज किया गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में
प्रश्न 1 एवं 2 के लिये अनुच्छे द
फोकस दूरी 15 cm वाला एक अवतल दर्पण दो भागों में विभाजित किया जाता है तथा दोनों भाग 2 mm की दूरी पर रखे जाते हैं।
20 cm की दूरी पर रखा एक बिन्दु बिम्ब t = 0 पर 1mm/s की चाल से चित्रानुसार गति करना प्रारम्भ करता है।
1. t = 0 पर दोनों भागों द्वारा निर्मित प्रतिबिम्बों के मध्य दूरी (mm में) ज्ञात कीजिये।
2. t = 0 पर दोनों भागों द्वारा निर्मित प्रतिबिम्बों के मध्य दूरी में परिवर्तन की दर (mm/s में) ज्ञात कीजिये।
H-8/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
v0
3. वह समय, जब पहली बार प्रेक्षक को बिम्ब का प्रतिबिम्ब दिखाई नहीं देता है, है तो n का मान ज्ञात कीजिये।
ng
4. सम्पूर्ण गति में समय का वह भाग क्या होगा जिसमें प्रेक्षक को बिम्ब का प्रतिबिम्ब प्रेक्षित नहीं होगा?
प्रश्न 5 एवं 6 के लिये अनुच्छे द
प्रत्येक m द्रव्यमान तथा q आवेश वाली दो छोटी आवेशित गेंदों को जब हवा में ℓ लम्बाई की रस्सियों द्वारा उभयनिष्ठ बिन्दु
से लटकाया जाता है तो वे एक-दूसरे से 120° का कोण बनाती है। जब निकाय को k परावैद्युत नियतांक वाले द्रव में डुबोते हैंं
1
(द्रव का गेंदों के पदार्थ के सापेक्ष सापेक्षिक घनत्व है) तो रस्सियों के मध्य कोण समान रहता है। [माध्यम में आवेशित कणों
3
1
के मध्य स्थिर वैद्युत बल, निर्वात में बल का गुना होता है।]
k
5. द्रव का परावैद्युतांक ज्ञात कीजिये।
6. यदि संपूर्ण निकाय (द्रव रहित) को गुरूत्व मुक्त क्षेत्र में रखा जाये तो रस्सियों के मध्य कोण (डिग्री में) होगा :-
1001CJA101021230070 H-9/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
SECTION-II (ii) : (अधिकतम अंक: 12)
इस खण्ड में तीन (03) प्रश्न हैं
प्रत्येक प्रश्न का उत्तर गैर ऋणात्मक पूर्णांक है।
प्रत्येक प्रश्न के उत्तर के सही पूर्णांक मान को उत्तर के लिए चिन्ह्ति स्थान पर दर्ज करें।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +4 यदि सिर्फ सही विकल्प को ही चुना गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में।
7. एक 60 cm गहराई वाली बेलनाकार बाल्टी में आंशिक रूप से 1.5 अपवर्तनांक वाला एक द्रव भरा है जिसके ऊपर 2 अपवर्तनांक
वाला तेल भरा हुआ है। यदि कोई प्रेक्षक बाल्टी के अन्दर ऊपर से देखता है तो उसे वायु, द्रव तथा तेल के आयतन समान दिखाई देते हैं।
α
यदि प्रेक्षक द्वारा देखी गई बाल्टी की आभासी गहराई α cm हो तो ( ) का मान ज्ञात कीजिये।
5
8. एक 2kg द्रव्यमान का मोती 8m लम्बाई वाली एक छड़ पर पिरोया गया है तथा यह 0.5 घर्षण गुणांक के साथ इस पर गति कर
सकता है। प्रारम्भिक क्षण पर यह मोती छड़ के मध्य बिन्दु पर है। यह छड़ गुरूत्व मुक्त क्षेत्र में क्षैतिज तल में छड़ के साथ 37° कोण
बनाने वाली दिशा में 1m/sec2 त्वरण के साथ स्थानान्तरणीय गति करती है। वह समय (सेकण्ड में) ज्ञात कीजिए जब मोती छड़ से
सम्पर्क छोड़ देगा।
9. प्रदर्शित निकाय पर विचार कीजिये। निकाय को इस प्रकार व्यवस्थित किया जाता है कि m तथा M दोनों शुद्ध स्थानांतरण गति में है।
यदि किसी क्षण M पर यह 1 m/s की चाल से नीचे की ओर गतिशील हो तो m की चाल (m/s में) ज्ञात कीजिये।
H-10/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
PART-2 : CHEMISTRY
SECTION-I (i) : (अधिकतम अंक: 24)
इस खंड में छः (06) प्रश्न हैं।
प्रत्येक प्रश्न के सही उत्तर (उत्तरों) के लिए चार विकल्प दिए गए हैं। इस चार विकल्पों में से एक या एक से अधिक विकल्प सही
है(हैं)।
प्रत्येक प्रश्न के लिए, प्रश्न का (के ) उत्तर देने हेतु सही विकल्प (विकल्पों) को चुने।
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा :
पूर्ण अंक : +4 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
आंशिक अंक : +3 यदि चारों विकल्प सही हैं परन्तु के वल तीन विकल्पों को चुना गया है।
आंशिक अंक : +2 यदि तीन या तीन से अधिक विकल्प सही हैं परन्तु के वल दो विकल्पों को चुना गया है और चुने हुए
दोनों विकल्प सही विकल्प हैं।
आंशिक अंक : +1 यदि दो या दो से अधिक विकल्प सही हैं परन्तु के वल एक विकल्प को चुना गया है और चुना हुआ
विकल्प सही विकल्प हैं।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –2 अन्य सभी परिस्थितियों में।
उदाहरण स्वरूप : यदि किसी प्रश्न के लिए के वल पहला, तीसरा एवं चौथा सही विकल्प हैं और दूसरा विकल्प गलत है; तो के वल
सभी तीन सही विकल्पों का चयन करने पर ही +4 अंक मिलेंगें। बिना कोई गलत विकल्प चुने (इस उदाहरण में दूसरा विकल्प) तीन
सही विकल्पों में से सिर्फ दो को चुनने पर (उदाहरणतः पहला तथा चौथा विकल्प) +2 अंक मिलेंगे। बिना कोई गलत विकल्प चुने
(इस उदाहरण में दूसरा विकल्प), तीन सही विकल्पों में से सिर्फ एक को चुनने पर (पहला या तीसरा या चौथा विकल्प) +1 अंक
मिलेंगे। कोई भी गलत विकल्प चुनने पर (इस उदाहरण में दूसरा विकल्प), –2 अंक मिलेंगे, चाहे सही विकल्प (विकल्पों) को चुना
गया हो या न चुना गया हो।
(C) जब NaCl को 1.58 gm SrCl2 के साथ पूर्ण रूप से डोप किया जाता है तो निर्मित धनायन रिक्तियों की संख्या 6 × 1021 है
(SrCl2 का मोलर द्रव्यमान = 158 gm/mole, NA = 6 × 1023)
(D) एक तत्व, FCC तथा HCP ठोसों के दो भिन्न – भिन्न पाॅलिमोर्फि क क्रिस्टलीय रूपों में अस्तित्व रख सकता है तो दोनों
ठोसों में रिक्ति प्रभाज, घनत्व तथा अंतर समतलीय स्थान समान होते हैं
2. क्रिस्टलीय टोस AB में B –2 आयन घनीय बंद संकु लन बनाता है तथा A+2 आयन एकांतरित स्थितियों पर उपयुक्त रिक्तियों को
घेरता है। यदि A+2 आयन की त्रिज्या 150 pm तथा B –2 आयन की 450 pm है तो सही कथन है/हैं :
[मानें कि त्रिज्य अनुपात नियम लागू होता है]
(A) ऋणायन तथा धनायन दोनों की समन्वय संख्या 4 है
(B) इकाई सैल के काय विकर्ण की लम्बाई 2400 pm है
(C) ठोस में 66.66% कु ल त्रिविमीय रिक्तियाँ नहीं घेरी गयी है
(D) प्रति इकाई सैल में 'AB' की प्रभावी सूत्र इकाईयों की संख्या एक है
1001CJA101021230070 H-11/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
(A) (B)
(C) (D)
4. निम्न में से कौनसे अणु, उनकी ठोस अवस्था में धनायनिक तथा ऋणायनिक रूप रखते है :
(A) N2O5
(B) PCl5
(C) PBr5
(D) XeF6
5. निम्न में से कौन ल्युकास अभिकर्मक के साथ तुरंत धुंधलापन प्रदर्शित करेगें?
(A)
(B)
(C)
(D)
6. दिये गये यौगिकों के धनायनिक तथा ऋणायनिक भाग की सही संकरण अवस्था क्रमशः हैं
(A) PBr5(s) → sp3 & sp3d2
(B) N2O5(s) → sp & sp2
(C) Cl2O6(s) → sp2 & sp3
(D) I2Cl6( ℓ iq.) → sp3 & sp3d2
H-12/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
SECTION-I (ii) : (अधिकतम अंक: 12)
इस खण्ड में चार (04) प्रश्न हैं
इस खण्ड में दो अनुच्छेद हैं
प्रत्येक अनुच्छेद पर दो प्रश्न दिए गयें हैं।
प्रत्येक प्रश्न में चार उत्तर विकल्प (A), (B), (C) और (D) हैं जिनमें के वल एक सही हैं।
प्रत्येक प्रश्न के लिए सही उत्तर विकल्प के अनुरूप विकल्प को चुनें।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +3 यदि सिर्फ सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
प्रश्न 7 एवं 8 के लिये अनुच्छे द
एक आयनिक ठोस [AB] के लिये दी गयी आयनिक क्रिस्टल इकाई सेल चित्रण के आधार पर निम्न प्रश्नों के उत्तर दीजिये :
1 × 97
(C)
6a3 × 10−7
2 × 97
(D)
6a3 × 10−7
1001CJA101021230070 H-13/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
∙∙
(A) 2
(B) 3
(C) 4
(D) 6
10. निम्न में सही कथन ही संख्या है
H O
(i) −−2→ (मुख्य उत्पाद)
SN 1
(ii) SN2 क्रियाविधि : CH3I > CH3Br > CH3Cl > CH3F
(iii) ध्रुवीय अप्रोटिक विलायक SN1 अभिक्रियाऐं के अनुकू ल है
(iv) SN2 अभिक्रिया में कार्बोनियम आयन मध्यवर्ती सम्मिलित होता है
(A) 2
(B) 3
(C) 4
(D) 1
H-14/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
SECTION-II (i) : (अधिकतम अंक: 12)
इस खंड में तीन (03) प्रश्न स्तम्भ (QUESTION STEM) है।
प्रत्येक प्रश्न स्तम्भ से सम्बधित दो (02) प्रश्न है।
प्रत्येक प्रश्न का उत्तर एक संख्यातमक मान (Numerical Value) है।
प्रत्येक प्रश्न के उत्तर से संबंधित सही संख्यात्मक मान को उत्तर के लिए चिन्हित स्थान पर दर्ज करें।
यदि संख्यात्मक मान में दो से अधिक दशमलव स्थान है, तो संख्यात्मक मान को दशमलव के दो (02) स्थानों तक समेंटे/शून्यांश
करें (truncate/round–off)
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न योजना के अनुसार होगा :
पूर्ण अंक : +2 यदि के वल सही संख्यात्मक मान (numerical value) को ही सबंधित स्थान में दर्ज किया गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में
प्रश्न 1 एवं 2 के लिये अनुच्छे द
इलेक्ट्राॅन स्नेही योगात्मक अभिक्रिया ऐल्किन की अभिलाक्षणिक अभिक्रिया है जहाँ एक रासायनिक यौगिक जिसमें द्विबंध तथा
त्रिबंध उपस्थित है, में एक π बंध टुटता है और साथ में नया σ बंध का निर्माण होता है
Br
1. सिस-2-ब्यूटीन −−−2→ .
CCl4
(i)
(ii)
(iii)
(iv)
1001CJA101021230070 H-15/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
H-16/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
SECTION-II (ii) : (अधिकतम अंक: 12)
इस खण्ड में तीन (03) प्रश्न हैं
प्रत्येक प्रश्न का उत्तर गैर ऋणात्मक पूर्णांक है।
प्रत्येक प्रश्न के उत्तर के सही पूर्णांक मान को उत्तर के लिए चिन्ह्ति स्थान पर दर्ज करें।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +4 यदि सिर्फ सही विकल्प को ही चुना गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में।
7. एक अवाष्पशील, अनवैद्युतअपघट्य विलेय (मोलर द्रव्यमान = 50 g mol –1) के कितने द्रव्यमान (ग्राम में) का 114 g ऑक्टेन
(मोलर द्रव्यमान = 114 gm/mole) में विलेय किया जाना चाहिये जिससे इसका वाष्प दाब 75% कम हो जाये :-
8. गलित I2 के ऋणायनिक भाग में प्रयोग में लिये गये के न्द्रीय परमाणु के संकर कक्षक की कु ल संख्या है
9. ठोस XeF6 के धनायनिक भाग में कितने लगभग 90° के बंध कोण उपस्थित होते हैं
1001CJA101021230070 H-17/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
PART-3 : MATHEMATICS
SECTION-I (i) : (अधिकतम अंक: 24)
इस खंड में छः (06) प्रश्न हैं।
प्रत्येक प्रश्न के सही उत्तर (उत्तरों) के लिए चार विकल्प दिए गए हैं। इस चार विकल्पों में से एक या एक से अधिक विकल्प सही
है(हैं)।
प्रत्येक प्रश्न के लिए, प्रश्न का (के ) उत्तर देने हेतु सही विकल्प (विकल्पों) को चुने।
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न अंकन योजना के अनुसार होगा :
पूर्ण अंक : +4 यदि के वल (सारे) सही विकल्प (विकल्पों) को चुना गया है।
आंशिक अंक : +3 यदि चारों विकल्प सही हैं परन्तु के वल तीन विकल्पों को चुना गया है।
आंशिक अंक : +2 यदि तीन या तीन से अधिक विकल्प सही हैं परन्तु के वल दो विकल्पों को चुना गया है और चुने हुए
दोनों विकल्प सही विकल्प हैं।
आंशिक अंक : +1 यदि दो या दो से अधिक विकल्प सही हैं परन्तु के वल एक विकल्प को चुना गया है और चुना हुआ
विकल्प सही विकल्प हैं।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है (अर्थात् प्रश्न अनुत्तरित है)।
ऋण अंक : –2 अन्य सभी परिस्थितियों में।
उदाहरण स्वरूप : यदि किसी प्रश्न के लिए के वल पहला, तीसरा एवं चौथा सही विकल्प हैं और दूसरा विकल्प गलत है; तो के वल
सभी तीन सही विकल्पों का चयन करने पर ही +4 अंक मिलेंगें। बिना कोई गलत विकल्प चुने (इस उदाहरण में दूसरा विकल्प) तीन
सही विकल्पों में से सिर्फ दो को चुनने पर (उदाहरणतः पहला तथा चौथा विकल्प) +2 अंक मिलेंगे। बिना कोई गलत विकल्प चुने
(इस उदाहरण में दूसरा विकल्प), तीन सही विकल्पों में से सिर्फ एक को चुनने पर (पहला या तीसरा या चौथा विकल्प) +1 अंक
मिलेंगे। कोई भी गलत विकल्प चुनने पर (इस उदाहरण में दूसरा विकल्प), –2 अंक मिलेंगे, चाहे सही विकल्प (विकल्पों) को चुना
गया हो या न चुना गया हो।
1. यदि – 1 ≤ x ≤ 3 में f(x) परिभाषित है जैसा चित्र में दर्शाया गया है, तो सही विकल्प/विकल्पों का चयन कीजिये ?
(C) lim
x→1
f(x) = विद्यमान नहीं होगा। (D) lim
x→3
f(x) = 1
4 x→∞
H-18/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
∞
2
3. ∑ tan−1 ( ) का मान बराबर नहीं है -
n=1 n2 + 2n + 1
(A) tan –1(1)
(B) tan –1(2)
(C) tan –1(3)
(D) tan –1(4)
4. यदि x2 – 3x – 5 = 0 के मूल α तथा β है, तो -
(A) α 3 + β 3 = 72
(B) 5 + 3 α + β 2 = 19
(C) α 3 – 6 α 2 + 4 α = 15
α3 β − 3α2 β
(D) =1
αβ 3 − 3αβ 2
5. फलन f : R → R, f(x) = x3 – 12x2 + 48x – 60 द्वारा परिभाषित है। यदि समीकरण f(x) = f –1(x) के हल a, b, c
(जहाँ a < b < c तथा [.], महत्तम पूर्णांक फलन एवं {.} भिन्नात्मक भाग फलन को दर्शाता है)
(A) [a + c ÷ b] = 2
(B) [a + c ÷ b] = 4
(C) {b + c ÷ a} = 0
(D) {b + c ÷ a} = 0.6̄
6. यदि 'm' का मान, जिसके लिये द्विघात समीकरण x2 + 2(m – 1)x + (m + 5) = 0 के मूल 3 से छोटे है, समुच्चय
8
( − , a] ∪ [b, ∞) द्वारा दिया जाता है। तब निम्न में से कौनसा/कौनसे सही होगा/होंगे ?
7
(A) a + b = 5
(B) a + b = 3
(C) b – a = 5
(D) b – a = 3
1001CJA101021230070 H-19/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
SECTION-I (ii) : (अधिकतम अंक: 12)
इस खण्ड में चार (04) प्रश्न हैं
इस खण्ड में दो अनुच्छेद हैं
प्रत्येक अनुच्छेद पर दो प्रश्न दिए गयें हैं।
प्रत्येक प्रश्न में चार उत्तर विकल्प (A), (B), (C) और (D) हैं जिनमें के वल एक सही हैं।
प्रत्येक प्रश्न के लिए सही उत्तर विकल्प के अनुरूप विकल्प को चुनें।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +3 यदि सिर्फ सही विकल्प को चुना गया है।
शून्य अंक : 0 यदि किसी भी विकल्प को नहीं चुना गया है
ऋण अंक : –1 अन्य सभी परिस्थितियों में।
प्रश्न 7 एवं 8 के लिये अनुच्छे द
यदि a = sin –1(sin(10)) + cos –1(cos(10))
1
b = cot –1 ( ) – cot
− –1
(5)
5
c = cos –1(sin( π )) + tan(tan−1 ( 9π ))
7 14
d= √ 800.sin(tan−1 (cos(cot(3.cot−1 √3)))) है।
7. a + d का मान है -
(A) 0 (B) π
(C) 5 π (D) 7 π
8. c – 2b का मान है -
(A) 0 (B) π
(C) 5 π (D) 7 π
प्रश्न 9 एवं 10 के लिये अनुच्छे द
माना A = log8 (log3 √
4
√27), B = (p + q + r + s), (p, q, r ∈ R)
3
H-20/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
SECTION-II (i) : (अधिकतम अंक: 12)
इस खंड में तीन (03) प्रश्न स्तम्भ (QUESTION STEM) है।
प्रत्येक प्रश्न स्तम्भ से सम्बधित दो (02) प्रश्न है।
प्रत्येक प्रश्न का उत्तर एक संख्यातमक मान (Numerical Value) है।
प्रत्येक प्रश्न के उत्तर से संबंधित सही संख्यात्मक मान को उत्तर के लिए चिन्हित स्थान पर दर्ज करें।
यदि संख्यात्मक मान में दो से अधिक दशमलव स्थान है, तो संख्यात्मक मान को दशमलव के दो (02) स्थानों तक समेंटे/शून्यांश
करें (truncate/round–off)
प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्न योजना के अनुसार होगा :
पूर्ण अंक : +2 यदि के वल सही संख्यात्मक मान (numerical value) को ही सबंधित स्थान में दर्ज किया गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में
प्रश्न 1 एवं 2 के लिये अनुच्छे द
⎧
⎪
a + bx , x<1
⎪
⎪
⎪
1001CJA101021230070 H-21/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
SECTION-II (ii) : (अधिकतम अंक: 12)
इस खण्ड में तीन (03) प्रश्न हैं
प्रत्येक प्रश्न का उत्तर गैर ऋणात्मक पूर्णांक है।
प्रत्येक प्रश्न के उत्तर के सही पूर्णांक मान को उत्तर के लिए चिन्ह्ति स्थान पर दर्ज करें।
प्रत्येक प्रश्न के लिए अंक निम्नलिखित परिस्थितियों में से किसी एक के अनुसार दिये जाएंगे :
पूर्ण अंक : +4 यदि सिर्फ सही विकल्प को ही चुना गया है।
शून्य अंक : 0 अन्य सभी परिस्थितियों में।
7. 12 3 a
यदि cos−1 ( ) + sin
−1
( ) = tan
−1
( ) हो, तो a + b का मान है - (जहाँ a तथा b सहअभाज्य संख्यायें है)
13 5 b
1/3 −1/2
8. lim x1/3 .
यदि x→∞ ( x2 + 1 ) ( ax2 + bx + c) = 2 हो, तो 100a का मान होगा
3
2x3 − (tan−1 x) 1
9. K के संभव मानों की संख्या, जिसके लिये x→∞
lim = है, ' λ ' हो, तो ' λ ' का
8
x3 cot−1 |Kx| + K 2 x6 sin 1
− 3Kx3 2
π x3
मान है -
H-22/24 1001CJA101021230070
Enthusiast Course/Phase-I & I(A)/25-02-2024/Paper-2
ALLEN ®
dPps dk;Z ds fy, LFkku
1001CJA101021230070 H-23/24
Target : JEE (Main + Advanced) 2025/25-02-2024/Paper-2
ALLEN ®
eSaus lHkh funsZ'kksa dks i<+ fy;k gS vkSj eS mudk eSaus ijh{kkFkhZ dk ifjp;] uke vkSj QkWeZ uEcj dks iwjh
vo'; ikyu d:¡ xk@d:¡ xhA rjg tk¡p fy;k gS ,oa iz' u i= vkSj vks - vkj- ,l- dks M
nksuksa leku gSaA
____________________________ ____________________________
ijh{kkFkhZ ds gLrk{kj fujh{kd ds gLrk{kj