Professional Documents
Culture Documents
004 - INSTALL CAR FRAME, ROPE CLIMBER AND REMOVE TOP FLOOR
FIM WORKING PLATFORM
Remove top floor working
4.7
platform
Safety warning!
Platforms, disassembled either outside or inside of hoistway must incorporate the use of Life Lines as a
fall arrest system, refer to WWJSSS 4.3.D.
004 - INSTALL CAR FRAME, ROPE CLIMBER AND REMOVE TOP FLOOR
FIM WORKING PLATFORM
Remove top floor working
4.7
platform
1.3 Remove the platform beams and support brackets of upper deck
004 - INSTALL CAR FRAME, ROPE CLIMBER AND REMOVE TOP FLOOR
FIM WORKING PLATFORM
Remove top floor working
4.7
platform
1.5 Remove the steel channel (Or angle iron) at the front end of lower deck
Structure 1 Structure 2
1.6 Loosen but don’t remove the bolts of the lower deck braces
004 - INSTALL CAR FRAME, ROPE CLIMBER AND REMOVE TOP FLOOR
FIM WORKING PLATFORM
Remove top floor working
4.7
platform
1.7 Remove the footboards in turns from the front end to the first angle iron, then remove the first
angle iron and the other footboards
004 - INSTALL CAR FRAME, ROPE CLIMBER AND REMOVE TOP FLOOR
FIM WORKING PLATFORM
Remove top floor working
4.7
platform
1.9 Remove the connection bolts of lower deck plank and support beams, and then pull the plank out
from hoistway. Remove the second angle iron and support beams finally.