Professional Documents
Culture Documents
PDF Analysis of Slope Stability and Stone Pitching For A 28m Long Slope - Compress
PDF Analysis of Slope Stability and Stone Pitching For A 28m Long Slope - Compress
References: TES-P-122.11
TCS-Q-113.02
AASHTO Soil Classification
Bishop Method for Slope Analysis.
Existing Site/ground Condition:
It is Understood that the existing soil strata is of poorly graded sand and engineering fill has been deposited maunally over it.
both poorly graded sand and the engineering fill formation can fail in shear thus stability is compromised and requires stability analysis.
As there is not water table, the soil will only fail i n shear behavior as shown in the figures.
Existing Soil Type:
Existing Soil crossdonds to A-1-b (reference AASHTO Soil Classifi cation Attached.
Slope length = 28 m
Slope Cut/Formation = Formation
2
Bearing Capacity = 150 kN/m
V= 1
H= 1.3
Water table = Not Encountered
Thickness of Stone Pitching = 0.3 m
Thickness of mortar Slope bench = 0.1 m
Stone Type SP = Gs = 2.5
3
Density of Stone = 2600 kg/m
Failure Plane Slope = 25 Degrees
Internal Friction Angle = 30 Degrees
Cohesion = c = 0 kPa
Friction coeff = m = 0.4
F.O.S = 2
c Compression 134.6 kN
a Sliding Force 103.5 kN
Resisting Forces
cL + [Wcosa] tanf = 2377.3 kN
Driving Forces
Wsina = 1441.1 kN
Resisting Forces
FOS =
Driving Forces
2
Check Bearing 102.8 KN/m OK 1.460 >1.2
28m Slope Formation along + Stone Pitching surface.
Slope length = 28 m
Slope Cut/Formation = Formation
2
Bearing Capacity = 150 kN/m
V= 1
H= 1.3
14.6
22.2
28
40.4 17.1
L1 = H [ 1/tana-1/tanq] = 17.4 m
L2 = 39.6 m
h1 = 17.1 m
L3 = 22.2 m
L= H/sina = 34.1 m
b = 169.8
Analysis of Forces along the slope:
c = 214.2
c Vertical comp 214.2 kN
b Hyp 169.8 kN a = 131
a Base 130.6 kN
a = 104
Resisting Forces:
cL + [Wcosa] tanf = 2414.3 kN
Driving Forces:
Wsina = 1812.1 kN
Resisting Forces
FOS =
Driving Forces
Check Sliding:
Sliding Force 103.5 kN
Soil Pressure 18.0 kN 2m
Pressure due to surcharge 7.6 kN 150mm
Total Sliding force = 129.2 kN 2.6m
2
Check Bearing: 102.8 KN/m OK 1.460 >1.2
22m Slope Formation along + Stone Pitching surface.
Slope length = 22 m
Slope Cut/Formation = Formation
2
Bearing Capacity = 150 kN/m
V= 1
H= 1.3
Water table = Not Encountered
Thickness of Stone Pitching = 0.3 m
Thickness of mortar Slope bench = 0.1 m
Stone Type SP = Gs = 2.5
3
Density of Stone = 2600 kg/m
Failure Plane Slope = 30 Degrees
31.1
13.7
17.4
22
26.8 13.4
L1 = H [ 1/tana-1/tanq] = 13.7 m
L2 = 31.1 m
h1 = 13.4 m
L3 = 17.4 m b = 133.4
L= H/sina = 26.8 m
c = 168.3
Driving Forces:
Wsina = 84.1 kN
Resisting Forces
FOS =
Driving Forces
Slope length = 16 m
Slope Cut/Formation = Formation
2
Bearing Capacity = 150 kN/m
V= 1
H= 1.3
22.6
9.9
12.7
16
19.5 9.8
L1 = H [ 1/tana-1/tanq] = 9.9 m
L2 = 22.6 m
h1 = 9.8 m
L3 = 12.7 m b = 97.0
L= H/sina = 19.5 m
c = 122.4
Resisting Forces:
cL + [Wcosa] tanf = 823.3 kN
Driving Forces:
Wsina = 617.9 kN
Resisting Forces
FOS =
Driving Forces
Check Sliding:
Sliding Force 59.1 kN
Soil Pressure 14.4 kN 1.6m
Pressure due to surcharge 7.6 kN 150mm
Total Sliding force = 81.2 kN 1.9m
2
Check Bearing: 81.3 KN/m OK 1.846 >1.2
10m Slope Formation along + Stone Pitching surface.
Slope length = 10 m
Slope Cut/Formation = Formation
2
Bearing Capacity = 150 kN/m
V= 1
H= 1.3
36.8
14.6
22.2
28
40.4 17.1
L1 = H [ 1/tana-1/tanq] = 6.2 m
L2 = 14.1 m
h1 = 6.1 m
L3 = 7.9 m
L= H/sina = 12.2 m
b = 60.6
Analysis of Forces along the slope:
c = 76.5
c Vertical comp 76.5 kN
b Hyp 60.6 kN a = 47
a Base 46.6 kN
Resisting Forces:
cL + [Wcosa] tanf = 340.7 kN
Driving Forces:
Wsina = 255.7 kN
Resisting Forces
FOS =
Driving Forces
Check Sliding:
Sliding Force 37.0 kN 1.3m
Soil Pressure 13.5 kN
150mm
Pressure due to surcharge 7.6 kN
1.5m
Total Sliding force = 58.1 kN
W
Tottaolf rsets
oinsetinbglofcokrce = 4
719..7
7 kN
kN OK 1.235 >1.2
2
Check Bearing: 75.2 KN/m OK 1.994 >1.2
2m
150mm
2.6m
1.9m
150mm
2.2m
1.3m 1.6m
150mm 150mm
1.5m 1.9m