Professional Documents
Culture Documents
Multiple Questions
Multiple Questions
A. AC
B. HVAC
C. Ventilators
D. HAC
Answer» B. HVAC
discuss
B. 4
C. 2
D. 5
Answer» C. 2
discuss (1)
B. Heat
C. Light
D. Smoke
Answer» C. Light
discuss
4. While calculating the handling capacity of lift, the weight of a person is taken as 65kg.
A. True
B. False
C. none
D. all
Answer» B. False
discuss
5. Which of the following is not a benchmark for environmental performance assessment?
A. LEED
B. BEAM
C. GBTools
D. Gini coefficient
discuss
6. Which of the following parameters does not affect the lift waiting time?
A. Rated load
B. Number of stops
D. Handling capacity
discuss
7.
The term _________ is used to mean the free passage of clean air in a structure.
A. Circulation
B. Ventilation
C. Dissipation
D. Condensation
Answer» B. Ventilation
discuss
8. For comfortable working, the ___________ content should be limited to about 0.6% by volume.
A. Oxygen
B. Hydrogen
C. Carbon monoxide
D. Carbon dioxide
9. Where people are working, there has to be ______________ to cause proper ventilation of the
8. For comfortable working, the ___________ content should be limited to about 0.6% by volume.
premises.
A. Air change
B. Humidity
C. Temperature
D. Moisture
discuss
10. The rate of amount of water vapour present to the amount it would have contained, had it been
saturated, is known as the ___________
A. Relative humidity
B. Saturated air
discuss
11. The_______________ plays an important role in the comfort of persons affected by ventilation
system.
A. Carbon monoxide
B. Purity of air
C. Volume of room
D. Health of occupant
discuss
12. It is quite evident that the incoming air for ventilation should be ________ in summer and
________ in winter before it enters the room.
A. cool, warm
B. warm, cool
C. humid, dry
D. dry, humid
13. In ______________ system, the use is made of doors, windows, ventilators and skylights to make
the room properly ventilated.
A. Artificial ventilation
B. Air conditioning
C. Natural ventilation
D. Mechanical ventilation
discuss
14. Exhaust system, supply system, air conditioning, etc. comes under ________ type of ventilation
system.
A. Natural
B. Mechanical
C. Man made
D. Doors
Answer» B. Mechanical
discuss
15. The term __________ is used to indicate the science of controlling air with respect to humidity,
temperature, movement of air, bacteria content, etc.
A. Air conditioning
B. Circulation
C. Condensation
D. Conditioning
discuss
16. _____________ is the process by which the required amount of moisture is added in the air.
A. Dehumidification
B. Humidification
C. Absorption
D. Condensation
Answer» B. Humidification
16. _____________ is the process by which the required amount of moisture is added in the air.
discuss
A. 30 per min
B. 30 per hour
C. 60 per min
D. 60 per hour
discuss
18. Viscous type filters are made of screens of spilt wire and coated with non-drying viscous oil in
order to catch and remove the dust particles from the incoming air.
A. True
B. False
C. none
D. all
Answer» A. True
discuss
discuss
20. The types of internal wiring used in domestic installations are ..........................
A. Cleat wiring
discuss
21. .................. type of wiring uses insulated cables supported in porcelain cleats
A. Cleat
B. CTS/RTS
C. Metal
Answer» A. Cleat
discuss
22. In cleat wiring. cleats shall be fixed at distances not greater than.................. cm apart and at
regular intervals.
A. 50
B. 60
C. 65
D. 70
Answer» B. 60
discuss
A. Conduit wiring
B. Cleat wiring
C. Batten wiring
D. None of these
discuss
discuss
B. No due to stability
D. No due to instability
discuss
A. Carbon dioxide
B. Carbon monoxide
C. Nitrogen peroxide
D. Hydrogen
discuss
27. ____________________ gas overestimates the rate of breathing and it is thus responsible for
increasing the intake of other toxic gases.
A. Hydrogen sulphide
B. Carbon monoxide
C. Carbon dioxide
D. Nitrogen dioxide
discuss
28. During fire, the human body can withstand temperature upto __________
A. 150°C
28. During fire, the human body can withstand temperature upto __________
B. 120°C
C. 200°C
D. 80°C
Answer» B. 120°C
discuss
A. 100
B. 50
C. 73
D. 21
Answer» D. 21
discuss
30. The hazard with concerns damage or destruction of building itself is known as the __________
A. Internal hazard
B. Building hazard
C. Surrounding hazard
D. Personal hazard
discuss
31. It is found that _______ are not seriously affected until very high temperature of 1200°C to 1300°
is reached.
A. Plastic
B. Limestone
C. Sandstone
D. Brick
Answer» D. Brick
discuss
32. Noise is
A. an unwanted noise
B. an irritant
C. a source of stress
discuss
A. Hertz
B. Decibel
C. ppm
Answer» A. Hertz
discuss
A. Rain collection
B. Rainwater harvesting
C. Rain digging
discuss
35. What is called for the method of removing dust and other particles from water using filters?
A. Filtration
B. Sublimation
C. Rainwater harvesting
D. Evaporation
Answer» A. Filtration
discuss
36. How many methods of rainwater harvesting are there?
A. One
B. Two
C. Three
D. Four
Answer» B. Two
discuss
discuss
A. True
B. False
C. none
D. all
Answer» A. True
discuss
D. None of above
discuss
40. Green building considers environmental, social, and _______ impacts of a building.
A. technological
B. economic
C. political
D. None of above
Answer» B. economic
discuss
A. Energy audits
B. Site appraisals
D. all of above
discuss
A. energy conservation.
C. Town Planning.
D. all of above
discuss
D. all of above
discuss
44. Building which utilizes solar energy such as solar film effectively ________heat gain during the
winter, and ________ heat gain during the summer.
A. increases; reduces
B. reduces; increases
C. reduces; reduces
D. None of above
discuss
45. ________ ventilation requires less energy, capital and maintenance costs, and contributes less
GHG emissions.
A. Mechanical
B. Natural
C. Automatic
D. None of above
Answer» B. Natural
discuss
A. Geothermal
B. Solar
C. Coal
D. all of above
Answer» C. Coal
discuss
47. A _______ building material can be made into new products again and again.
A. recyclable
B. reusable
C. repairable
D. None of above
Answer» A. recyclable
discuss
48. When does Sustainable Construction take place?
A. During the design phase of a building’ s development
D. None of above
discuss
49. Sustainable construction considers the ____________ and ____________ impacts of construction
activities on the surrounding neighborhood.
A. operational; economical
B. environmental; operational
C. environmental; social
D. None of above
discuss
A. Outside
B. Inside
C. Sideways
Answer» B. Inside
discuss
A. No frame
B. Less width
C. Steel frames
D. Less height
discuss
52. MCB stands for
A. Miniature Circuit Breaker
D. None
discuss
D. None
discuss
D. All of above
discuss
A. CTS
B. TRS
C. Both a and b
D. None
discuss
56. Repairing and maintenance is easy in
A. Conduit wiring
B. Cleat wiring
discuss
57. There are additional types of conduit wiring according to Pipes installation
C. Both a and b
D. None of these
discuss
A. Yes
B. No
C. none
D. all
Answer» A. Yes
discuss
59. In direct current (DC), the electric charge (current) only flows in ___direction.
A. Two
B. One
C. Three
D. None
Answer» B. One
discuss
60. AC means
A. Alternate current
B. All current
C. Alter current
D. Non
discuss
61. DC means
A. Double current
B. Dry current
C. Direct current
D. None
discuss
62. DC current flows in one direction, while ac current rises from zero to a maximum, then falls to
zero in one direction, then rises to a maximum, then falls to zero in the opposite direction.
A. True
B. False
C. none
D. all
Answer» A. True
discuss
A. True
B. False
C. none
D. all
Answer» B. False
discuss
64. An ac wave shape could be a sine wave, square wave, or saw tooth wave.
A. True
B. False
C. none
D. all
Answer» A. True
discuss
65. 2 way switching means having two or more switches in different locations to control _____ lamp
A. One
B. Two
C. None
D. All of above
Answer» A. One
discuss
66. In a single phase power supply, the power is supplied through two wires called
A. Phase
B. Neutral
C. Both a and b
D. None
discuss
A. 230 v
B. 220 v
C. 110 v
D. 500 v
Answer» A. 230 v
discuss
68. The voltage of three phase supply____
A. 450 v
B. 415 v
C. 220 v
D. 230 v
Answer» B. 415 v
discuss
69. For a gold LEED certification, how many points are required?
A. 40-49
B. 60-79
C. 50-59
D. 80-110
Answer» B. 60-79
discuss
70. Which of the below green building in India has received a platinum LEED certification?
discuss
A. Eutrophication
B. Regional ozone
C. Climate change
D. Pollution
discuss
72. LEED is a building rating system developed and maintained by
discuss
D. All of these
discuss (1)
74. the difference of temperature between the outside air and inside air tends to the deposition of
moisture in the room surfaces known as ___________
A. Ventilation
B. Diffusion
C. Condensation
D. Dissipation
Answer» C. Condensation
discuss
75. the ________________ plays an important role in the comfort of persons affected by ventilation
system.
A. Carbon monoxide
B. Purity of air
C. Volume of room
D. Health of occupant
discuss
76. Wastewater from different sources like bathrooms, kitchens and wash basins is called ______
A. Sewage
B. Garbage
C. Sullage
D. Discharge
Answer» C. Sullage
discuss
77. Which of the following conditions is not suitable for the disposal of excreta or sewage?
discuss
78. In urban cities like Bangalore, which of the water carriage system is used?
A. Separate system
B. Combined system
discuss
79. The relatively clean wastewater from baths, sinks, washing machines and other kitchen appliance
is called ________
A. Grey water
B. Black water
C. Yellow water
D. Wastewater
discuss
80. The overall purpose of sanitation is to maintain the green environment alone.
A. True
B. False
C. none
D. all
Answer» B. False
discuss
A. Filtration
B. Cleaning
C. Decreasing velocity
D. Decreasing flow
Answer» B. Cleaning
discuss
82. Rapid filtration is used as the _______ clarifying step in municipal water treatment plants.
A. First
B. Second
C. Intermediate
D. Final
Answer» D. Final
discuss
A. Turbidity
B. Color
C. Temperature
D. COD
Answer» B. Color
discuss
84. The type of wastewater from the flushing operation of toilet is __________
A. Green water
B. Red water
C. Black water
D. Brown water
discuss
D. Bandwidth on demand
discuss
86. Which of the following actions may best help maintain human comfort even in an increased indoo
temperature?
A. Lowering the humidity
discuss
A. Plenum
B. Air conditioning
C. Exhaust
D. Natural
Answer» C. Exhaust
discuss
88. In horizontal belt, the loose side is generally kept on the bottom.
A. True
B. False
C. none
D. all
Answer» B. False
discuss
A. wind action
B. stack effect
C. both
D. none
Answer» C. both
discuss
90. The systems installed in buildings to make them comfortable, functional, efficient and safeis called
_________________
A. AC
B. Noise Protection
C. Mechanical Services
D. Building Services
discuss (1)
D. all of above
discuss
92. Apartments, flats, Bungalows are _________type of building
A. Residential Building
B. Commercial building
C. privet building
D. educational building
discuss
93. Building structures which are used for the storage, handling, manufacture of materials which are
liable to burn with extreme rapidity and prove hazardous to health building or building contents
are called ____________
A. Assembly Building
B. Hazardous building
C. mercantile building
discuss
A. Mechanical system
B. Electrical system
D. Multiple services
discuss
A. Mechanical system
B. Electrical system
D. Multiple services
discuss
96. Fire protection system is one type of
A. Mechanical system
B. Electrical system
D. Multiple services
discuss
A. Mechanical system
B. Electrical system
D. Multiple services
discuss
A. Mechanical system
B. Electrical system
D. Multiple services
discuss
A. Mechanical system
B. Electrical system
D. Multiple services
discuss
100. Lawn sprinklers is one type of
A. Mechanical system
B. Electrical system
D. Multiple services
A. Mechanical system
B. Electrical system
D. Multiple services
discuss
A. To promote work and other activities carried out within the building.
D. all of above
discuss
D. all of above
discuss
104. The value of Illumination in lux of Residential building
A. 100-150-200
B. 200-300
C. 300
D. 100-450
Answer» A. 100-150-200
discuss
A. 100-150-200
B. 200-300
C. 300
D. 100-450
Answer» B. 200-300
discuss
A. 100-150-200
B. 200-300
C. 300
D. 100-450
Answer» A. 100-150-200
discuss
A. 100-150-200
B. 200-300
C. 300
D. 100-450
Answer» C. 300
discuss
108. The value of Illumination in lux of Industrial building
A. 100-150-200
B. 200-300
C. 300
D. 100-450
Answer» D. 100-450
discuss
A. 100-150-200
B. 200-300
C. 300
D. 100-450
Answer» C. 300
discuss
A. Direct glare
B. Reflected glare
C. Veiling Glare
D. Glare
discuss
111. Due to reflection from light sources or surfaces of excessive brightness is called_________
A. Direct glare
B. Reflected glare
C. Veiling Glare
D. Glare
discuss
112. where the peripheral field is comparatively very bright is called_________
A. Direct glare
B. Reflected glare
C. Veiling Glare
D. Glare
discuss
113. Excessive contrast or abrupt and large changes in brightness produces the effect of ______
A. Direct glare
B. Reflected glare
C. Veiling Glare
D. Glare
Answer» D. Glare
discuss
114. Total quantity of light emitted from a point source of light per second is called____________
A. luminous flux
B. luminous intensity
C. Illuminance
D. Lumen
discuss
A. luminous flux
B. luminous intensity
C. Illuminance
D. Lumen
Answer» D. Lumen
discuss
116. Amount of luminous flux emitted from a source in any one direction per unit solid angle is
called____________
A. luminous flux
B. luminous intensity
C. Illuminance
D. Lumen
discuss
A. glare
B. visual task
C. candela
D. Lumen
Answer» C. candela
discuss
118. The ease and certainty with which an eye can seen an object is called____________
A. glare
B. visual task
C. candela
D. Lumen
discuss
119. The light received by the earth from the sun consists how many parts?
A. 1
B. 2
C. 3
D. 4
Answer» B. 2
discuss
120. The relative amount of sky illuminance depends on
discuss
121. For Indian conditions, how much solar altitude is assumed as the standard for design purposes.
A. 10
B. 12
C. 15
D. 17
Answer» B. 12
discuss
122. The recommended design sky illuminance values for cold climate is
A. 6800
B. 8000
C. 9000
D. 10500
Answer» A. 6800
discuss
123. The recommended design sky illuminance values for warm humid climate is
A. 6800
B. 8000
C. 9000
D. 10500
Answer» C. 9000
discuss
124. The recommended design sky illuminance values for hot dry climate is
A. 6800
B. 8000
C. 9000
D. 10500
Answer» D. 10500
discuss
125. The recommended design sky illuminance values for composite climate is
A. 6800
B. 8000
C. 9000
D. 10500
Answer» B. 8000
discuss
126. The recommended design sky illuminance values for temperature climate is
A. 6800
B. 8000
C. 9000
D. 10500
Answer» C. 9000
discuss
127. The percentage of that part of daylight illumination at a point in the interior on a given plane
which is received directly from the sky s called____________
A. internal reflected component
B. sky component
D. glare
discuss
128. The ratio (or percentage) of that part of the day light illuminance at a point on a given plane whic
is received by direct reflection from external surfaces is called____________
A. internal reflected component
B. sky component
D. glare
discuss
129. The ratio (or percentage) of that part of the daylight illuminance at a point in a given plane which
is received by direct reflection or inter-reflection from the internal surfaces is called____________
A. internal reflected component
B. sky component
D. glare
discuss
A. Where the recommended illumination levels have to be obtained by artificial lighting only.
B. To supplement day lighting when the level of illumination falls below the recommended value.
discuss
A. Vacuum type
D. b&c
Answer» D. b & c
discuss
132. Which is the type of incandescent lamp?
B. arch lamp
discuss
C. To control dust
discuss
B. To reduce humidity
discuss
A. Air change
B. humidity
C. quality of air
discuss
136. The minimum & maximum rate of air change is 60 per hour.
A. 1, 30
B. 30, 60
C. 1, 60
D. none of these
Answer» C. 1, 60
discuss
137. As per IS : 3362-1965 recommends the following air changes in residential buildings for living
room is
A. minimum 3
B. maximum 3
C. minimum 6
D. no need
Answer» A. minimum 3
discuss
138. As per IS : 3362-1965 recommends the following air changes in residential buildings for bathroom
is
A. minimum 3
B. maximum 3
C. minimum 6
D. no need
Answer» C. minimum 6
discuss
139. As per IS : 3362-1965 recommends the following air changes in residential buildings for passage i
A. minimum 3
B. maximum 3
C. minimum 6
D. no need
Answer» D. no need
discuss
140. As per IS : 3362-1965 recommends the following air changes in residential buildings for kitchen is
A. minimum 3
B. maximum 3
C. minimum 6
D. no need
Answer» A. minimum 3
discuss
141. Requirement of air changes per hour in an enclosed area as per NBC 2005 for assembly hall
A. 2-4
B. 4-8
C. 8-12
D. 10-15
Answer» B. 4-8
discuss
142. Requirement of air changes per hour in an enclosed area as per NBC 2005 for bed rooms
A. 2-4
B. 4-8
C. 8-12
D. 10-15
Answer» A. 2-4
discuss
143. Requirement of air changes per hour in an enclosed area as per NBC 2005 for conference room
A. 2-4
B. 4-8
C. 8-12
D. 10-15
Answer» C. 8-12
discuss
144. Requirement of air changes per hour in an enclosed area as per NBC 2005 for cinema
A. 2-4
B. 4-8
C. 8-12
D. 10-15
Answer» D. 10-15
discuss
145. Requirement of air changes per hour in an enclosed area as per NBC 2005 for hospital
A. 3-5
B. 6-8
C. 6-10
D. 8-10
Answer» B. 6-8
discuss
146. Requirement of air changes per hour in an enclosed area as per NBC 2005 for libraries
A. 3-5
B. 6-8
C. 6-10
D. 8-10
Answer» A. 3-5
discuss
147. Requirement of air changes per hour in an enclosed area as per NBC 2005 for
factories
A. 3-5
B. 6-8
C. 6-10
D. 8-10
Answer» D. 8-10
Questions and Answers
1.
What kind of internally threaded galvanized fitting isused to close the end of an externally
threaded pipe?
A.Water main B.Water distributing pipe C.Building supply pipe D.Water service pipe
3.
A device used in conjunction with a fixture such aswater closet and urinal which discharges
a pre-determined quantity of water for flushing purposes. Thisdevice is actuated by direct
water pressure from branchpipes.
A.Waste stack B.Vent stack C.Soil branch D.Soil and waste stack
6.
Which of the following plumbing system items isconsidered a plumbing appurtenance?
A.Fixtures of similar type and class such as agroup of water closets, lavatories, urinals, etc. B.Two or
more fixtures connected to acommon branch C.Fixtures that are adjacent to each other D.All of these
13.
Where may be a cleanout be omitted?
A.At the upper end of every horizontal soil orwaste branch B.At the base of stack C.At 1.5 m from a
fixture D.At 15 meters or less length of horizontal runof waste and soil pipe
14.
It refers to the continuous exchange of water withinthe hydrosphere, between the atmosphere,
groundsurface, underground and water surface.
A.Building sewer B.Building drain C.Building storm drain D.Building sewage pipe
21.
What property of water is characterized by its ability tostick and pull itself together. It can be
demonstrated on adripping tap where water cling to its orifice and forms tinyglobules that
stretches before it fall.
24.
In a building, it consists of water service pipe, buildingsupply pipes and the essential branch
pipes, valves andall other appurtenances for the supply of water.
A.Water and waste service system B.Water pipeline system C.Water supply and distribution
system D.Building water service and sewage pipingsystem
25.
Any pipe which conveys the discharge of water closet,urinals or fixtures having similar
function, with or withoutthe discharge from other fixtures to the building drain orbuilding
sewer.
A.Water service pipe B.Water main C.Water distributing pipe D.Building water supply pipe
27.
A vertical pipe which conveys only wastewater orliquid waste free from fecal matter.
A.Sanitary drainage system B.Water supply system C.Storm drainage system D.Ventilation system
35.
A watertight compartment into which the discharge ofsanitary plumbing system or part
thereof, designed andconstructed to retain solids, digest organic matter throughperiod of
detention and to allow the liquid to dischargeinto the soil outside of the tank through a system
of open- jointed sub-surface piping or seepage pit.
A.Plumbing system shall be maintained in asanitary and serviceable condition B.Water closet
may be located in an unlit orunventilated room C.Plumbing fixtures shall be designed
andadjusted to use minimum amount of water forflushing D.All premises intended for human
habitationshall be provided with ample and wholesomeamount of water
38.
A general term which refers to the process ofremoving contaminants from water. It involves
severalprocesses that is intended to render raw water intopotable and safe water for
consumption.
A.Soil piping system B.Ventilation system C.Storm drainage system D.Sewage disposal system
44.
What kind of fitting is used to connect a lavatory armto a drain pipe with an angle of 90
degree?
A.Single hub pipe B.Standard pipe C.Double hub pipe D.Hubless pipe
46.
That property of plumbing material that allowsmechanical deformation by extrusion,forging,
rolling, etc,without fracturing. Galvanized steel pipe has this property.
A.Double sanitary tee B.Double wye combination C.Double inverted wye D.Double tapped tee
52.
It is provided with a valve that can be activated bymeans of a lever or a push button to release
a pre-determined quantity of water for flushing.
A.Flushometer type water closet B.Tank type water closet C.Siphon vortex water closet D.Wall hung
water closet
53.
A kind of fitting that is a combination of wye branchand 1/8 bend where the branch inlet is
parallel to thedrum; such fitting is used when connecting vent stack withsoil stack at its base.
A.Solvent cement welding B.Soldered joint C.Threaded joint D.Heat fusion joint
61.
The following is a standard size of a galvanized steelpipe EXCEPT __________.
A.Sanitary drainage system B.Vent piping system C.Hot and cold water system D.All of the above
63.
Which of the following copper tube types is theheaviest?
A.Butterfly valve B.Gate valve C.Globe valve D.Stop and waste valve
67.
A valve in which the flow of liquid is controlled by arotating drilled ball that fits tightly
against a resilient(flexible) seat in the valve body.
A.Balance valve B.Pressure relief valve C.Plug valve D.Temperature and pressure relief valve
69.
Compression coupling joint is used on what kind ofcast iron pipe?
Document6 pages
BU-Exam Sheet With Answer
Catherine Roberto
No ratings yet
Master Plumber Exam Review on Rigid Solutions Topics
Document7 pages
Master Plumber Exam Review on Rigid Solutions Topics
Allen Espeleta
No ratings yet
Final Examination For Tech 1d and Btled Ia 20
Document5 pages
Final Examination For Tech 1d and Btled Ia 20
cyrelle rose jumento
No ratings yet
o
Magazines
Podcasts
o
Sheet music
Document12 pages
How to support cast iron piping horizontally
naytpuri montemayor
No ratings yet
SP and Di Set 1 With Answer
Document13 pages
SP and Di Set 1 With Answer
Mercy Gomez
No ratings yet
Plumbing
Document31 pages
Plumbing
Nicko Jay Bajao
No ratings yet
Exam
Document22 pages
Exam
Richard Bulanhagui
No ratings yet
Question Excerpt From National Plumbing Code of The Philippines
Document33 pages
Question Excerpt From National Plumbing Code of The Philippines
Lorence Gabayan
No ratings yet
PP Final Mock Board Answer Key
Document21 pages
PP Final Mock Board Answer Key
Justin Fernandez
0% (1)
Splbe - Master Plumber 2015: C. Sinks
Document31 pages
Splbe - Master Plumber 2015: C. Sinks
XDXDXD
No ratings yet
P-trap permissible trap
Document3 pages
P-trap permissible trap
Maria Elisha Mae Candelaria
No ratings yet
Plumbing Design Reviewer
Document83 pages
Plumbing Design Reviewer
kent john ballarta
100% (1)
Show more
Footer menu
Back to top
About
About Scribd
Everand: Ebooks & Audiobooks
SlideShare
Press
Join our team!
Contact us
Invite friends
Scribd for enterprise
Support
Help / FAQ
Accessibility
Purchase help
AdChoices
Legal
Terms
Privacy
Copyright
Cookie Preferences
Do not sell or share my personal information
Social
InstagramInstagram
TwitterTwitter
FacebookFacebook
PinterestPinterest
Documents
Language:
English