Professional Documents
Culture Documents
Rear Strut
Rear Strut
PPW
202 -C7E
4 /0 55F
01: 5 /0 9 E
29: 2
SEN 04+
R 0
© 2 691 8:00
024 8
Cat
erp
illa
r In
c.
Illustration 1 g00901967
:
PPW
202 -C7E
4 /0 55F
01: 5 9E
29: /02
SEN 04+
R 0
© 2 691 8:00
024 8
Cat
erp
illa
r In
c.
Illustration 2 g00901968
Note: When you assemble suspension cylinder, you must fill the cylinder with the
proper amount of oil. Refer to the Testing and Adjusting, "Suspension Cylinder Oil
Requirements" for the correct initial fill. See Testing and Adjusting, Suspension
Cylinder (Rear) - Purge and Charge for the charging procedure and for the
:
charging dimensions.
(B) Inside diameter of head (two places) ... 228.68 ± 0.03 mm (9.003 ± 0.001 inch)
024 8
(2) Lubricate the sealing lip lightly with the lubricant that is being sealed.
Cat
erp
(3) Torque for one relief valve ... 50 ± 10 N·m (37 ± 7 lb ft)
illa
r In
(4) Torque for one check valve assembly ... 50 ± 10 N·m (37 ± 7 lb ft)
c.
(5) Torque for one valve ... 50 ± 10 N·m (37 ± 7 lb ft)
PPW-C7E55F9E
:
2024/05/02
01:28:56+08:00
i01358529
© 2024 Caterpillar Inc.
: