Professional Documents
Culture Documents
• Properties toolbar.
• PROPERTIES command.
• Current, global line type scaling, and LTSCALE factor.
• Grid, Snap, and Ortho modes.
• Object Snaps.
• Combine Object Snap modes and running Object Snap modes.
• AutoTracking.
UNDERSTANDING THE CONCEPT AND USE
4. Working with Drawing Aids
OF LAYERS
Partial view of the Layer Properties Manager with the new layer created
Making a Layer Current
4. Working with Drawing Aids
The Snap and Grid tab in the Drafting Settings dialog box
Setting Grid
4. Working with Drawing Aids
The ENDpoint Object Snap mode The MIDpoint Object Snap mode
Nearest Center
4. Working with Drawing Aids
The NEArest Object Snap mode The CENter Object Snap mode
Tangent Quadrant
4. Working with Drawing Aids
The TANgent Object Snap mode The QUAdrant Object Snap mode
Intersection
Apparent Intersection
4. Working with Drawing Aids
Perpendicular
The INTersection Object Snap mode Selecting the start point and then
the perpendicular snap
Node Insert
4. Working with Drawing Aids
None
Parallel Extension
4. Working with Drawing Aids
Using the PARallel Object Snap Using the EXTension Object Snap
mode mode
From Midpoint Between 2 Points
4. Working with Drawing Aids
Using the From Object Snap Using the Midpoint Between 2 Points
mode to locate a point Object Snap mode to locate a point
Temporary Tracking Point
The Polar Tracking tab of the The AutoTrack Settings area in the
Drafting Settings dialog box Options dialog box (Drafting tab)
FUNCTION AND CONTROL KEYS
F1 F2 F3
4. Working with Drawing Aids
F4 F5 F6
F7 F8 F9