Professional Documents
Culture Documents
GOOD
MORNING!
CHECKING OF
ATTENDANCE
• What system of measurement provides
the creative way on how people can
measure by themselves. For example,
people measure shorter distance on the
ground with their feet. They measure long
distances by their palms which is equal to
a yard. It includes inch, yard and miles.
Answer: ENGLISH
SYSTEM
How many inches are there in 1
foot?
Answer: 12 INCHES
Answer: 12 INCHES
What system is a decimalized system of
measurement. It exists in several
variations with different choices of base
units. It is widely used around the world
for personal, commercial and scientific
purposes. millimeter, centimeter,
decimeter and meter.
ANSWER: METRIC SYSTEM
ANSWER: METRIC
SYSTEM
How do you read the 5th
graduation in centimeter if the
first graduation is .5mm?
Answer: 2.5 mm
Answer: 2.5 mm
Solve the following
equation in the board
with solution:
6 feet = ________ inches .
Answer:
Since
10 feet = 12 inches
1 feet
10 x 12 inches
1
10 feet= 120 inches
THE
MULTITEST
ER
BY: ABEGAIL B. NGIPOL
THE MULTI-TESTER
The Multitester or multimeter is sometimes called the VOM (voltmeter,
ohmmeter, milliammeter). It is the best instrument that can measure
voltage, resistance and current. It is generally made of two types: the
analog and the digital.
PARTS OF A MULTI TESTER
1. POINTER. The needle-shaped rod that moves over the
scale of a meter. Pointer It is mechanically connected to the
moving coil. it indicates the measured values on the
multimeter scale.
2. RANGE SELECTOR KNOB (Selector switch)
makes it possible to select different functions and
range of the meter.
3. SCALE is a series of marking used for
reading the value of a quantity.
SCALE is a series of marking used for reading the value of
a quantity. The scale can have different types of scale, for
voltage and current readings the scales have mostly linear
which means equal division. Test probe positive (red),
negative (black) is used to connect the circuit to the
electrical components being tested.
4. Zero-Ohm Adjusting Knob is used to
zero-in the pointer before measuring
resistance.
6. TEST PROBE is used to connect the
circuit to the electrical components being
tested. Positive – red & negative – black.
Test probe
Proper Care And Maintenance Of The
Multi Tester