Professional Documents
Culture Documents
BRANDS &
BUYERS
About us
Factory Profile
02 Daily Finishing Capacity The Daily Finishing and Packing capacity of Triple Seven Apparels Ltd.
are 20% above of daily production. This is to avoid any back lot in the
Finishing Section.
03 Folding System Flat Pack to Standard Packing and Fancy Stand for required Folding.
04 Finishing Quality System Garments are always checked 100% from inside after thread cutting
100% from outside after ironing. Important comport ant components are
measured for acceptable tolerance. Before Poly bagging total quantity are
checked for Get Up.
05 Pre-Final Audit Before sending for cartooning, Finishing quality Controller conducts audit
and if he passes only then it is allowed for packing, otherwise all these
garments are declared for re-check. When Garments are packed in use
carton, Quality Assurance Manager conducts Pre-Final inspection before
offering for final inspection to the Buyer.
Manpower of Quality & Finishing Section
Quality
Finishing
Knit
15 Juki Plan Machine 36 Set
16 Over Lock (4 Third) 30 Set
17 Flat Lock 15 Set
18 Rib Cutter 2 Set
Number of Machines 600 Set
Supporting Machines
Understand and fulfill the dynamic
need of customers and markets in
order to provide them with top-class
service and build long-term
relationships built on trust and
care.