Professional Documents
Culture Documents
Physics Project Report On Electromagnetic Induction: Faraday's Experiment
Physics Project Report On Electromagnetic Induction: Faraday's Experiment
2. The induced e.m.f. lasts as long as the change in magnetic flux continuous.
3. The magnitude of induced e.m.f. is directly proportional to the rate of change of
magnetic flux linked with the circuit.
Lenzs Rule :
Lenzs rule is a convenient method to determine the direction of induced current
produced in the circuit.
Lenzs law states that the induced current produced in a circuit always flows in
such a direction that it opposes the change or cause that produce it.
Let us now apply Lenzs law to find the direction of flow of induced current in the
circuit.
On pressing the key the current in the coil P flows in clockwise direction and
magnetic lines of force are directed from left to right. Then magnetic flux linked
with the coil S changed. The direction of induced current should be such that it
should oppose the direction of flow of magnetic field lines. So induced current in
the coil S is in the direction opposite to the magnetic field in P. Hence, direction of
induced current in coil S is from right to left. So induced current in coil S should
flow in anticlockwise direction.
Expression for Motional e.m.f. :
Consider that a uniform magnetic field B confined to the region PQRS and a coil
ABCD is placed inside the magnetic field. The direction of magnetic field is
perpendicular to the plane of the coil and in inward direction.
Consider that at any time t, the part BA = CD = x(say) of the coil inside the
magnetic field. If l is the length of the arm BC of the coil, then area of coil inside
the magnetic field at any time t.
A = BCX CD = lx
Therefore magnetic flux linked with the coil at any time t.
= BA = Blx
Suppose that the coil is pulled out of the magnetic field with velocity . As the coil
is pulled out magnetic flux linked with the coil changes. The time rate of change of
magnetic flux linked with the coil is given by
= -Bl
The negative sign shows that induced e.m.f. opposes to the coil being pulled out of
magnetic field.
Mutual Induction :
Consider two coil P and S are placed very close to each other. Coil P consists of
battery and tapping key and coil S consists of galvanometer G. When the key of
coil P is pressed then magnetic flux is building and induced e.m.f. produced in it
opposes the flow of magnetic flux. Because coil P and coil S are very close to each
other. So magnetic flux also changed in coil S and induced current is produced
which opposes the direction of flow of magnetic lines of force in coil P.
The phenomenon according to which an opposing e.m.f. is produced in a coil as a
result of change in current or magnetic flux linked with a neighboring coil is called
mutual induction.
Coefficient of Mutual Induction :
Suppose that current I is flowing through coil P and be the magnetic flux linked
with coil S
I
= MI
M = Coefficient of mutual induction.
Let be the induced e.m.f. in coil S.
=
M = /
The mutual inductance of two coils is said to be one Henry, if a rate of change of
current of 1 ampere per second in one coil induces an e.m.f. of 1 volt in
neighboring coil.
Self Induction
Consider a coil connected to a battery and a tapping key. When key K is pressed
magnetic lines of forces starts growing through it and induced e.m.f. is produced.
Direction of induced e.m.f. is opposite to that of growth of current. On the other
hand when key is released the current in the coil decreases and e.m.f. is produced
in opposite direction. Thus during both growth and decay of current an opposite
induced e.m.f. is produced. This e.m.f. is called back e.m.f.
The phenomenon according to which an opposing induced e.m.f. is produced in the
coil as a result of change in current or magnetic flux linked with the coil is called
self induction.
Coefficient of Self Induction :
Suppose when key is pressed, current I flows through the coil and magnetic
flux linked with the coil.
I
= MI
L is called coefficient of self induction.
Let be the induced e.m.f.
M = /
Self inductance of a coil is said to be one Henry if a rate of change of current of 1
ampere per second induces an e.m.f. of one volt.
Eddy Currents :
Eddy currents are the currents induced in a conductor, when placed in a changing
magnetic field. They are also known as Focaults Currents.
Following experiment explain the origin of eddy currents. Introduce a soft iron
core inside a solenoid and connect it to the source of alternating current. Place a
metallic disk over soft iron core.
Explanation : When the circuit is switched on the current starts growing and
hence magnetic flux linked with disk also increases. Thus disk is converted to
small magnet. If soft irons upper face acquires north polarity. Then metallic disks
lower surface acquires north polarity and due to repulsive force metallic disk
placed over soft iron core is thrown up into the air.
Application of Eddy Currents :
1. Dead Beat Galvanometers :
The oscillation of a moving coil galvanometer generally take a long time to die out.
But by winding its coil on a metallic frame made of copper or aluminium the
galvanometer can be made dead beat. It is because, due to production of eddy
currents in a metallic frame. The coil of galvanometer comes to rest very soon.
2. Speedometer :
In speedometer, a small magnet is geared to the main shaft of the vehicle. The
magnet is mounted in an aluminium cylinder with the help of hair springs. Due to
rotation of magnet eddy currents are produced which led the drum to oppose the
motion of relating magnet drum experience torque and gets deflected at certain
angle.
3. Electric Brakes :
A metallic drum is coupled to the wheels of train ; so that when train rotates drum
also rotates. In order to stop the train magnetic field is applied to rotating drum.
The eddy currents produced oppose the motion of drum. Since drum is connected
to wheels of train, it comes to halt.
Bibliography
1. www.yahoo.com
2. www.google.com
3. www.live.com
4. www.rediffmail.com