Professional Documents
Culture Documents
Rigid MS255SR
MITER SAW
USES:
• Crosscutting all types of wood
• Cutting Capacity with Miter at 0°/Bevel 0°: Maximum nominal lumber size:
• 2x12
• 4x4
• Cutting Capacity with Miter at 45°/Bevel 0°: Maximum nominal lumber size:
• 2x8
• 4x4
TYPES OF CUTS:
• Rip cut
• Bevel cut
SAFETY FEATURES:
• Lock-Off Button
• Dust collector
10 INCH BLADE
Your compound miter saw is equipped with a 10-inch Spindle-lock button
Freud 40-tooth, general purpose blade. Arbor screw guard
MITER-DETENT LOCKING LEVER BEVEL 33.9° (USA)/ 30° (CANADA) STOP BLOCK
The miter-detent locking lever, when used with the miter- Use this stop block to set the saw-arm at
bevel 33.9° (USA)/ 30° (Canada). To cut crown molding Blade wrench storage
lock lever lifted (unlocked), can release the miter
table from pre-set index points. horizontally or vertically, use the bevel stop block and
set the miter to 31.6° left or right (USA)/miter 35.3°
POSITIVE STOPS ON MITER TABLE left or right (Canada). This setting can also be used to cut
Positive stops at right and left 0°, 15°, 22.5°, 31.6°, and flat wood stock.
Fig. 1
45° (for USA) / 0°, 15°, 22.5°, 35.3°, 45° (for Canada).
10
9