Professional Documents
Culture Documents
Method of Statement Repair Honeycomb PDF
Method of Statement Repair Honeycomb PDF
1.0 OBJEVTIVE
1.1 To outline the method statement for rectification of Loose Concrete and
honeycombs.
2.0 SCOPE
2.1 This method of statement applies to all activities associated with grouting works at
site of our scope.
3.0 PURPOSE
3.1 This method of statement describes the procedure and inspection instructions to be
followed during application of Grouting works. This has to ensure that all activities
are in full compliance with requirements as per manufacturer’s standards.
4.0 SOURCES
4.1 SikaGrout-215 (Product Data Sheet)
5.7 Using a masonry trowel, a layer of the non-shrink grout is then applied onto the
surface of the affected area.
5.8 Level the surface to the required shape and finishing. The affected area shall be
brushed / trowel smoothly.
5.9 The repaired area will be hardened after about 4 to 5 hours.
8.0 SAFETY
8.1 All relevant personnel shall be made familiar to this method of statement.
8.2 All related personnel must be wearing necessary PPEs.
8.3 All necessary precautions must be taken for working with high places and necessary
scaffoldings.
8.4 Material contains cement, which may produce an allergic effect. Keep out of reach
of children.