Professional Documents
Culture Documents
DSEPower
ELECTRO-MAGNETIC COMPATIBILITY
VIBRATION
BS EN 60068-2-6
Ten sweeps in each of three
major axes
The 2 Amp, 3 Amp and 5 Amp The chargers will continue to 5 Hz to 8 Hz @ +/-7.5 mm,
8 Hz to 500 Hz @ 2 gn
Battery Chargers have been operate during cranking and
designed to be permanently running. All chargers can accept HUMIDITY
BS EN 60068-2-30
connected to a battery, keeping it multiple AC voltage connections. Db Damp Heat Cyclic 20/55 oC
charged to maximum capacity. @ 95% RH 48 Hours
The DSE battery chargers are BS EN 60068-2-78
Cab Damp Heat Static 40 oC
The chargers can be either expertly designed using high-grade @ 93% RH 48 Hours
mounted via DIN rail or to the components and capacitors
SHOCK
chassis, using the fixing holes that allowing the units to function more BS EN 60068-2-27
are built into the case. The chargers efficiently, providing a longer and Three shocks in each of three major axes
stylish design includes an LED more reliable life-span than other 15 gn in 11 mS
indicator on the front that shows chargers in their class. Their in-
when the charger is in a normal or built robustness makes them ideal
overload condition. for the rigours of a wide variety of
markets including heavy and light
industrial environments.
1ph
N
DSE9000
7
OTHER
1 1
ISSUE 5
®
DSEPower
AC SUPPLY
DSE9150 OUTPUT
3 A DC 12 V DC at 13.7 V DC
DSE9155 OUTPUT
2 A DC 30 V DC at 34.3 V DC
DSE9255 OUTPUT
5 A DC 24 V DC at 27.4 V DV
DSE9150 - 3 A 12 V EFFICIENCY
>80%
REGULATION
LINE
<0.001% Vo
LOAD
1% Vo
PROTECTIONS
Short Circuit
Over Voltage
Over Current
Reverse Polarity
DSE9130 - 5 A 12 V DIMENSIONS
DSE9155 - 2 A 30 V DSE9150 DIMENSIONS
108 mm x 101 mm x 49 mm
DSE9255 - 5 A 24 V 4.2” x 4” x 1.9”
WEIGHT
0.16 kg
ADVANCED FEATURES KEY BENEFITS
DSE9130, DSE9155 & DSE9255
Multi-Stage Charging Boost Mode • Suitable for a wide range of DIMENSIONS
• Constant current- maximum • Boosts and equalises cell battery types 136 mm x 140 mm x 63 mm
5.4” x 5.5” x 2.5”
current available during charge charge improving battery • No moving parts for longer
recovery phase performance and life battery charger life WEIGHT
• Constant voltage • Simple boost connection using • Switched mode design 0.5 kg
-40 °F to +185 °F
• Multiple modules can be linked -40 oC to +85 oC
• Makes the chargers ideal for all Eco-Power to save energy
battery types together to provide larger current
Full Protection output
• Reverse polarity protection,
short circuit protection and
current limiting
• Automatic recovery after the
removal of fault conditions
RELATED MATERIALS
TITLE PART NO’S
DSE9000 Series Installation Instructions 053-049
DSE9000 Series Operator Manual 057-085
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to change Registered in England & Wales No.01319649 055-059/10/10 (7)
the details shown on this data sheet without prior notice. The contents are intended for guidance only. VAT No.316923457