The document is a material requisition review checklist for lighting poles and fixtures with contract number ADDAR-MR-011, which checks that the item descriptions are standardized, specifications and drawings are referenced correctly, applicable standards are specified, required data sheets and inspection codes are attached, and inspection and test requirements are described if applicable. It also checks that applicable non-mandatory requirements are attached, spare parts requirements are met, special material requirements are identified, and the level of inspection is noted.
The document is a material requisition review checklist for lighting poles and fixtures with contract number ADDAR-MR-011, which checks that the item descriptions are standardized, specifications and drawings are referenced correctly, applicable standards are specified, required data sheets and inspection codes are attached, and inspection and test requirements are described if applicable. It also checks that applicable non-mandatory requirements are attached, spare parts requirements are met, special material requirements are identified, and the level of inspection is noted.
The document is a material requisition review checklist for lighting poles and fixtures with contract number ADDAR-MR-011, which checks that the item descriptions are standardized, specifications and drawings are referenced correctly, applicable standards are specified, required data sheets and inspection codes are attached, and inspection and test requirements are described if applicable. It also checks that applicable non-mandatory requirements are attached, spare parts requirements are met, special material requirements are identified, and the level of inspection is noted.
CONTRACTOR MR NO. : ADDAR-MR-011 SA-DUMMY PO NO. ELEMENT YES NO NA REMARKS ITEM DESCRIPTION STANDARDIZED TO SAMSS 9COM: 6000001008, 6000000983, CATALOGUED, CCC, INSPECTABLE ITEMS IDENTIFIED 6000000897 SPECIFICATION ARE CORRECT, STNDS., DRAWINGS ARE REFERENCED IN ITEM DESCRIPTION. SAMSS/SAES ARE REFERENCED AND APPLICABLE INTERNATIONAL STANDARDS. REQUIRED DATA SHEET ATTACHED (IF APPLICABLE)
REVISION DATE OF SAMSS/SAES ARE
SPECIFIED
PROJECT DRAWING SHEETS INITIALED
CORRECT INSPECTION CODE (SA-175)
IDENTIFIED AND ATTACHED. INSPECTION AND TEST REQUIREMENTS ON SA- 175 SPECIAL DESCRIBED (IF APPLICABLE) APPLICABLE NMR ATTACHED (SA FORM 7900- 7930), SUFFICIENT QTY 601, 602 & 603'S REQUESTED. SPARE PARTS DATA PACKAGE REQUIREMENTS; SAEP-3101; ESP.
HAZARDOUS, HEAVY LIFT, SPECIAL MATERIAL
REQUIREMENTS.
CAPITAL SPARES/START-UP/COM SPARE
PARTS/PROCESS & OP. MATERIALS, SPECIAL TOOL MAINTENANCE EQUIPMENT. VENDOR REPRESENTATIVE FOR SAFE START- UP
ENGLISH LANGUAGE NOTE
VENDOR MR DEVIATION STATEMENT.
SPECIAL REQUIREMENTS(LIST)
"SCHEDULE Q" LEVEL OF INSPECTION.
NOTE: Level of Inspection shall be as per SAEP- LEVEL-0 1151, unless approved by VID