Professional Documents
Culture Documents
HB938 Inv ZF75 Eng 02 17 PDF
HB938 Inv ZF75 Eng 02 17 PDF
COMPOSITE FLOOR
HB938-INV
ZF75 GALVANNEAL
LIMIT STATES
DESIGN
METRIC
DEPTH FROM MAXIMUM FACTORED PHYSICAL
Note SECTION MODULUS Moment of Inertia
NEUTRAL REACTIONS
1. Load Tables are NOMINAL MASS WITH
MIDSPAN SUPPORT MIDSPAN FULL
AXIS TO PROPERTIES
CORE AREA OF ZF75 BOTTOM OF EXTERIOR INTERIOR STEEL PROPERTIES
based on the design Sm Ss Im If
THICKNESS STEEL GALVANNEAL DECK Y b (kN) (kN)
of ONE-WAY (mm3 x 103) (mm3 x 103) (mm4 x 103) (mm4 x 103)
(mm) (mm2) (kg/m2) (mm)
composite slabs
carrying uniformly 0.76 996.8 8.08 9.76 9.59 228.3 228.3 14.90 10.9 15.7 (PER METRE WIDTH)
distubuted loads on a 0.91 1197.4 9.65 12.31 11.70 274.0 274.0 14.95 15.3 22.3 In accordance
simple span basis. with CSA
1.22 1593.0 12.83 16.21 15.87 364.0 364.0 15.06 25.8 38.4
For complete design Specification
criteria see the 1.52 1992.1 15.96 20.06 20.00 454.4 454.4 15.17 38.9 58.7
S136-07
VICWEST Hi-Bond
Composite Floor SLAB THICKNESS 101 111 126 136 PHYSICAL
Designer's Manual. h(mm)
Slab Weight, W1(kN/m2) 2.11 2.33 2.67 2.90 PROPERTIES
2. A uniform loading in
Concrete Volume, (m3/m2) 0.088 0.098 0.113 0.123 COMPOSITE SLAB
excess of 10 kPa Base Steel Nominal (PER METRE WIDTH)
(200 psf) is often an Thickness IC d IC d IC d IC d
indication of Composite
(mm)
concentrated or Moment of
moving loads. Such 0.76 6839 86.1 8918 96.1 12749 111.1 15821 121.1 Inertia,
conditions may 0.91 7300 86.1 9507 96.1 13565 111.1 16812 121.1 I C (mm4 x 103)
require additional
1.22 8127 85.9 10568 95.9 15042 110.9 18611 120.9 Effective Depth,
reinforcing steel.
Contact VICWEST d (mm)
1.52 8873 85.8 11528 95.8 16388 110.8 20256 120.8
for additional design
Base Steel
information
Nominal 1 2 3 1 2 3 1 2 3 1 2 3
LOAD TABLE
3. Slab Thickness h, is Thickness Span Span Span Span Span Span Span Span Span Span Span Span Span
from underside of (mm) (mm)
steel deck to top of 1200 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 Maximum
concrete. Maximum 1400 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 Specified
0.76
span is not to exceed 1600 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 Uniformly
32h. 1800 20.0 20.0 20.0
Distributed Load
4. Properties and loads 1200 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
are based on Grade in kN/m 2 (kPa)
1400 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
230 steel (Grade 33 1600 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
steel) with a 0.91
1800 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 Shear Bond
minimum yield stress 2000 20.0 20.0 20.0 20.0 20.0 Coefficents
of 230 MPa (33,000
2200 k 1 = 7.6424
psi) and a maximum
1400 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 k 2 = 170.1435
stress under
1600 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 k 3 = 0.2729
Factored loads of 207
MPa (29,700 psi). 1800 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 k 4 = -0.0928
2000 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
1.22
5. Load values are 2200 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
based on Normal 2400 18.0 18.0 20.0 20.0
Weight Concrete 2600
(density of 2300 2800
kg/m3) (145 pcf) with 1800 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
a minimum 2000 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
compressive strength 20.0 20.0 20.0 20.0
2200 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
of 20.7 MPa (3,000 1.52 2400 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0 20.0
psi) and a Modular
2600 18.5 18.5 20.0 20.0 20.0 20.0 20.0
Ratio n=9
2800 16.6 16.6 18.6
3000
Continued on back
In accordance with ongoing efforts to improve our products and their performance, Vicwest
reserves the right to change without notice the specifications contained herein.
The contents herein are for general information and illustrative purposes only and are not intended to
serve as any type of advice. Every effort is made to ensure the accuracy of the information included in
this brochure and it is believed that the information contained herein is accurate and reliable as of the
date of publication. Vicwest, however, does not warrant or represent the accuracy or reliability of any
information included in this brochure. Any reliance on any information without consultation with Vicwest VW00147EN10/10
or a duly authorized representative shall be at the user's own risk. ©2010, Vicwest – All rights reserved
HI-BOND
COMPOSITE FLOOR
HB938-INV
ZF75 GALVANNEAL
LIMIT STATES
DESIGN
IMPERIAL
PHYSICAL DEPTH FROM MAXIMUM FACTORED
SECTION MODULUS Moment of Inertia Note
NEUTRAL REACTIONS
PROPERTIES NOMINAL MASS WITH
MIDSPAN SUPPORT MIDSPAN FULL
AXIS TO
Continued from
STEEL PROFILE CORE AREA OF ZF75 BOTTOM OF EXTERIOR INTERIOR
STEEL GALVANNEAL Sm Ss Im If DECK Y b front
THICKNESS (pounds) (pounds)
(inches) (inches2) (lb/ft2) (inches3) (inches3) (inches4) (inches4) (inches)
(PER FOOT WIDTH) .030 0.471 1.655 0.1815 0.1784 0.1672 0.1672 0.587 747 1076 6. No additional
In accordance with ongoing efforts to improve our products and their performance, Vicwest
reserves the right to change without notice the specifications contained herein.
The contents herein are for general information and illustrative purposes only and are not intended to
serve as any type of advice. Every effort is made to ensure the accuracy of the information included in
this brochure and it is believed that the information contained herein is accurate and reliable as of the
date of publication. Vicwest, however, does not warrant or represent the accuracy or reliability of any
information included in this brochure. Any reliance on any information without consultation with Vicwest VW00147EN10/10
or a duly authorized representative shall be at the user's own risk. ©2010, Vicwest – All rights reserved