Professional Documents
Culture Documents
Product catalogue
ATLAS COPCO
Geotechnical Drilling
and Exploration
Atlas Copco Geotechnical Drilling and Exploration, GDE, have a long
tradition of supplying geotechnical engineers with a wide range of
equipment and services. Our product offer consists of rigs, grouting
solutions, casing adancement systems, DTH hammers and a full
range of high tech and high quality site investigation tools.
lowering tool
Atlas Copco S Geobor wireline is a core barrel
protection
Overload
overshot
Dry hole
system intended for core drilling and sampling in soft
Vertical
formations.
Technical data
Metric system (mm) Sub
Size Description
Hole diameter method 1, 5 - 6
Support
coupling
Landing Plastic
coupling liner
Outer tube
Inner
tube
Core
Reaming
lifter
shell
Core
lifter
Guide case
bushing
Bit
WIRELINE TRIPLE TUBE CORE BARREL, S GEOBOR
Spare parts list Method 1
Optional
24
5
4
1 3
6 25
2
7
8 20
21 26
10
11
12
13 27
14 15
16
17
18
19
23
28
22
29
30
WIRELINE TRIPLE TUBE CORE BARREL, S GEOBOR
Spare parts list Method 2, 3, 4
Method 2 - (OD 150 mm) Coring in soft to very soft formations
Item Description Qty Part number
1 Core lifter case 1 3867 2876 00
2 Core bit type, pilot and reamer with TC inserts 1 8372 0902 10
Method 3 - (OD 150 mm) Coring in very soft and loose formations
Item Description Qty Part number
1 Core lifter case* 1 3867 2881 00
2 Core bit type, pilot and reamer with TC inserts 1 8372 0941 40
*) Core lifter case protrudes about 25 mm in front of the pilot bit
Method 4 - (OD 146 mm) Coring in soft varying formations (Mazier method)
Item Description Qty Part number
Conversion kit complete 1 3702 1405 80
- Coupling 1 3702 1418 00
- Spring 1 3702 1425 00
- Shaft 1 3702 1419 00
- Coupling 1 3702 1420 00
- Washer 1 0301 2230 00
- Lock nut 2 0295 3108 00
- O-ring 1 0663 2147 00
- Outer tube extension, 360 mm 1 3702 1424 00
- Guide bushing 1 3744 0013 41
1 - Core lifter case* 1 3702 1421 00
2 Core bit type, pilot and reamer with TC inserts** 1 8372 0942 30
2 2 2
5
6
7
8
9
WIRELINE TRIPLE TUBE CORE BARREL, S GEOBOR
Spare parts list Method 6
Method 6 - Non coring (OD 146 mm) To be used with OD 3 7/8" non coring bit, conn. 2 3/8" API REG pin
Item Description Qty Part number
Non-coring tube complete, 1500 mm 1 8392 0630 00
Non-coring tube complete, 3000 mm 1 8392 0630 10
1-6 Conversion kit complete, 1500 mm 1 3702 1403 80
1-6 Conversion kit complete, 3000 mm 3702 1403 81
1
2
6
5
Core bit 5
Pilot coring with core barrel 101 T6/T2 (Optional Subs for pilot-coring with method 6)
Item Description Qty Part number
Sub 2 3/8" API REG pin to NW pin 1 3702 0088 00
Sub 2 3/8" API REG pin to 2 3/8" API REG pin 1 3702 0070 00
WIRELINE TRIPLE TUBE CORE BARREL, S GEOBOR
Spare parts Method 7, 8
2
3
13
4
6
7
8
14
5
10
9
15
17
21
11
18
19
20
16
12
2
1
3 5
9
4
6 10
6 6
11
7
WIRELINE TRIPLE TUBE CORE BARREL, S GEOBOR
Optional equipment
Spare parts kits core barrel method 1 (500 m) Spare parts kit dry hole device
Description S Geobor Description S Geobor
Qty. 3702 1271 90 Qty. 3702 1224 90
Parts included Parts included
Spring pin 3 Q O-ring 1 Q
O-ring 2 Q Latch 3 Q
Latch 3 Q
Pin 6 Q
Seal 1 Q
Core lifter 10 Q