Professional Documents
Culture Documents
Flange, TB/FF
Note:
1. Offered Material: GRE FM
2. Design Temperature (°C): 85°C
3. Installation Type: UG
4. The listed product weights are based on theoretical geometrical calculation and are meant for transportation and handling
purposes only. Actual weights of supplied products may vary
•Torque values mentioned are meant only for ‘’Flat Face’’ FRP Flange connected to ‘’Flat Face’’ FRP or other material Flange
and Blind Flange. Nothing that, FPI recommends to use steel spacer rings in case the steel flange and blind flange are ‘’Raised
Face’’.if the FRP Flange will be connected to Rubber-lined equipment such as valve, bellows, etc., FPI shall be contacted for
further review to advise the torque values in such cases.. Flange TF tolerance for ID<450 +2/-1.
•Kroll & Ziller type G-ST-P/S or equivalent (rubber gaskets with steel inlay) Can be used
Flange Drilling
Flange Qualified
Design Pressure
Minimum Total
Inner Diameter
Overall Length
Service/Piping
Laying Length
Thickness
Pressure
No. of Holes
Description
Weight
Bolt Pitch
Diameter
Diameter
Class
Bolt Size
Outside
Flange
Hole
- DP ID Pq L Lo TF W Du Dst d n dB -
- bar mm bar mm mm mm Kg mm mm inch - inch -
17100 19.6 300 50.0 50 175 85 19.5 483 431.8 1 12 7/8 ASME B16.5 Class 150
Design Pressure
Inner Diameter
FM APPROVED
Service/Piping
Rubber Type
Gasket Type
Bolt Torque
Class
- DP ID BT - - -
- bar mm Nm - - -
17100 19.6 300 75 Kroll & Ziller G-ST-P/S EPDM-S FM 20
FPI-2022-004183-VETM-CDE-PRD-AUH-22-027-R0-Fire water 3 of 4
Drawing Title Wavistrong® - Field Joint
Project Name JI201- BUHASA FIREWATER NETWORK REPLACEMENT PROJECT
Location Abu Dhabi
Contractor PROGETTI EUROPA & GLOBAL ABU DHABI
End User ADNOC GAS PROCESSSING
Drawing Number FPI-2022-004183-VETM-CDE-PRD-AUH-22-027-R0-Fire water
Sheet Number 3 This document contains confidential and proprietary information of Future Pipe
Project Number 06I000533 Industries. No reproduction or disclosure of any part to third parties is allowed without
Scale Not To Scale written authorization by Future Pipe Industries.
Rev. Comment Date Prepared By Checked By Approved By
0 Issued for Reviews and Comments 15-Sep-2022 Arun Sarath Robert
Note:
1. Offered Material: GRE FM
2. Design Temperature (°C): 85°C
3. Installation Type: UG
Design Pressure
Inner Diameter
FM APPROVED
Service/Piping
Bond Length
Lamination
Minimum
Thickness
Class
- DP ID TW.LAM BL -
- bar mm mm mm -
17100 19.6 300 10.2 150 FM 20
FPI-2022-004183-VETM-CDE-PRD-AUH-22-027-R0-Fire water 4 of 4