Professional Documents
Culture Documents
Home / Reference Guides / Concrete Design - BS 8110 / Beam Design to BS 8110 / Design for Bending (Beams: BS 8110) / Design for Bending for Flanged Sec ons
(Beams: BS 8110)
hf = MIN(hf,side1, hf,side2)
where
K = M/(fcu*beff*d2)
x = (d-z)/0.45
a = 0.9*x
IF a ≤ hf THEN the rectangular compression block is wholly in the depth of the flange and the
sec on can be designed as a rectangular sec on by se ng bw = beff.
IF a > hf THEN the rectangular compression block extends into the rib of the flanged sec on and the
following design method is to be used.
NOTE: It is assumed that if thickness of flange (hf) is less than 0.1*d then the beam will be treated
as rectangular.
MR = βf* fcu*beff*d2
K = M / (fcu*beff*d2)
K’ = 0.156
https://teklastructuraldesigner.support.tekla.com/webhelps/tsd/2017/BS/Reference_Guides/BS_Concrete_Member_Design_Handbook/Beam_De… 1/3
26/09/2019 Design for Bending for Flanged Sections (Beams: BS 8110)
IF
THEN
ELSE
Mf = (0.67* fcu/γm)*hf*(beff-bw)*(d-0.5*hf)
Where
The remaining design moment is taken by the web Mw, is given by;
Mw = M - Mf
Kw = (Mw)/(fcu*bw*d2)
K’ = (0.156)
x = (d- z)/0.45
The ul mate resistance moment of the web only, Muw is given by;
Muw = K’*fcu*bw*d2
https://teklastructuraldesigner.support.tekla.com/webhelps/tsd/2017/BS/Reference_Guides/BS_Concrete_Member_Design_Handbook/Beam_De… 2/3
26/09/2019 Design for Bending for Flanged Sections (Beams: BS 8110)
Where
As,reqd = [Mf / (0.87* fy* (d - 0.5* hf))] + [Muw / (0.87* fy*z)] + As’
A BS 8110-1:1997 3.4.4.1
Parent topic
• Design for Bending
https://teklastructuraldesigner.support.tekla.com/webhelps/tsd/2017/BS/Reference_Guides/BS_Concrete_Member_Design_Handbook/Beam_De… 3/3