Professional Documents
Culture Documents
Parts Supplied:
Reverse Camera Wiring Harness
Left side kick trim: Remove plastic nut at front, remove Phillips head screw behind oval cover place. Remove front and rear
scuff trims.
Remove Screw
Left side tail light assembly: Pull back boot pinch mould, Remove black cover above tail light and Remove tail light.
Pull out wiring rubber boot behind tail light.
Wiring boot
removed
The reverse image should look similar to the below image. Some slight adjustment to the
camera may be necessary by loosening the camera in its housing adjusting to the correct
angle and re-tightening . Please note this reverse camera option activates in reverse only and
is not accessible via the “ Car Info / Reverse Camera ” Sub menu from the vehicles main
screen. This feature is inactive and will yield a black screen unless the vehicle is in reverse.
Photo of reverse image on screen