Matina Campus, Davao City Telefax: (082)296-1084 Phone No.: (082)300-5456/300-0647 Local 131
CE 2L 3rd Exam Instructions: Create and design the model shown in the figure below using STAAD ProV8i and design the concrete structure (Beam and Column).
1. Design Parameters: (20pts) •Zone 2
Use the following parameters: Fc = 28MPa, Fy = •Importance factor, Category 2 414MPa (Main Reinforcement 25mmØ), Fy = •Rw = 8.5 (for X) 275MPa (Secondary Reinforcement 10mmØ), •CT & Periods are default Concrete Cover = 50mm, ρmin=0.00338. (NOTE: 4. Design Loads (20pts.) DO NOT use OFFSET just use SFACE). •DL = 10 kN/m for Superimposed Dead Load for 2. Modelling: (30pts) all floors and Roof deck Member Properties •DL = 23.6 kN/m3 * Height of Floor * thickness •All Girder at 2nd floor– 350 mm x 450mm of wall (0.15m) (for walls) •All Girder at 3rd floor– 300 mm x 450 mm •LL = 24kN/m for Roof Deck and Rooms •All Girder at Roof Deck – 300 mm x 400 mm Primary Loads (copy the name of the loading) •Columns at 1st – 2nd floor – 450 mm x 450 mm (10pts.) (for Rectangular Section) •Seismic Load @ X-Direction only •Columns at 3rd floor – 400 mm diameter •Dead Load (circular column) •Full Live Load 3. Loadings: (20 pts.) 5. Once finished, SAVE the staad editor in a Use UBC 1997 for Seismic Load, R=8.5, Zone 4, NOTEPAD. Filename [SURNAME, FIRST NAME – I=Na=Nv=Soil.Profile=1. Parameters for UBC 2nd EXAM].(10PTS) 1997 (10pts.)
A Flat Slab Is A Two-Way Reinforced Concrete Slab That Usually Does Not Have Beams and Girders, and The Loads Are Transferred Directly To The Supporting Concrete Columns