The document provides information on pile load distribution for a pile with a 0.25 m diameter supporting an axial working load of 2500 kN. It includes the pile dimensions, allowable working load, location of piles, and calculations of load distribution, moments, and section properties. The maximum positive load on a pile is 515.34 kN which is less than the allowable working load, therefore the pile configuration is considered safe.
The document provides information on pile load distribution for a pile with a 0.25 m diameter supporting an axial working load of 2500 kN. It includes the pile dimensions, allowable working load, location of piles, and calculations of load distribution, moments, and section properties. The maximum positive load on a pile is 515.34 kN which is less than the allowable working load, therefore the pile configuration is considered safe.
The document provides information on pile load distribution for a pile with a 0.25 m diameter supporting an axial working load of 2500 kN. It includes the pile dimensions, allowable working load, location of piles, and calculations of load distribution, moments, and section properties. The maximum positive load on a pile is 515.34 kN which is less than the allowable working load, therefore the pile configuration is considered safe.
ex= Σ(x1a1+x2a2...)/(Σ(a1+a2...) = -0.0855 m ez = Σ(z1a1+z2a2...)/(Σ(a1+a2...) = -0.0075 m Transv Moment (Mx=Py*ez) = 18.75 kNm Long'l Moment (Mz=Py*ex) = 213.75 kNm