This document provides a pavement design calculation for a bituminous pavement with an aggregate base using the R-value method. It lists the inputs of 20-year design traffic loads, design R-value, and required GE values. It then calculates the recommended pavement thicknesses for different layers to meet the minimum GE requirements, and compares this to a proposed pavement design.
This document provides a pavement design calculation for a bituminous pavement with an aggregate base using the R-value method. It lists the inputs of 20-year design traffic loads, design R-value, and required GE values. It then calculates the recommended pavement thicknesses for different layers to meet the minimum GE requirements, and compares this to a proposed pavement design.
This document provides a pavement design calculation for a bituminous pavement with an aggregate base using the R-value method. It lists the inputs of 20-year design traffic loads, design R-value, and required GE values. It then calculates the recommended pavement thicknesses for different layers to meet the minimum GE requirements, and compares this to a proposed pavement design.
Ver. 1.2 For Bituminous Pavement With Aggregate Base
Inputs Project Number 20 Yr Design Lane BESALs = Design R-value = Designer
GE Values from R-Value Chart Date
Minimum Bit (GE) = 7.00 Min. Agg. Base (GE) = 3.00 Total Required GE = 0.00
Calculated Pavement Thickness to Meet GE Requirement
Thickness (in) GE Layer GE (2360) Wearing Course 3.50 2.25 7.88 (2360) Non-wearing Course 0.00 2.25 0.00 Bituminous Total 3.50 2.25 7.88 Thickness (in) GE Layer GE Aggregate Base Class 5, 5Q or 6 3.00 1.00 3.00 Sub Base Class 3 or 4 0.00 0.75 0.00 Select Granular 0.00 0.50 0.00
Total 6.50 Total 10.88
Required* 12.50 Required 0.00
Proposed Pavement Thickness
New Bituminous Thickness (in) GE Layer GE Wearing Course Superpave HMA [2360] 1 2.25 0.00 Non-wearing Course Plant Mix HMA [2331] 5 2.00 0.00 New Bituminous Total 0.0 0.00
Left In-place Bituminous *1 Thickness (in) GE Layer GE
Required 0.00 Messages Total GE: GOOD Total Bituminous Thickness is Less Than 3.5 inch Minimum Total Aggregate Base GE is Less Than Minimum by More Than 0.5 inch Last Edited 6/5/19 1000 10000 100000 1000000 0 10000000 0 0 0 0 0 0 0