Professional Documents
Culture Documents
Documentation Type Test
Documentation Type Test
Documentation Type Test
Approval of Drawings
The successful Tenderer shall submit five (05) sets of Drawings and other technical information of
the offered goods to the office of the CE (P&D), DESCO within seven (07) days from the date of
signing of the contract agreement, for approval. No work shall be performed in connection with
the fabrication and manufacture of the offered goods until the drawings and technical data have
been approved. The cost of supplying drawing shall be borne by the supplier.
.
Type Test Certificate for meters, CT & PT
The tenderer shall submit the type test certificate of 110 V 3 Phase, 4 Wire 3 element solid state
programmable meter from the following testing laboratories. If the tenderer fails to submit the
test reports from any of the mentioned laboratories , the submitted tender of that tenderer shall
not be considered for evaluation.
a. CPRI (India),
b. UKAS accredited Laboratories
c. KEMA(Holland),
d. CESI (Italy),
e. Underwriter’s Laboratory (USA),
f. MET Laboratories Inc. (USA),
g. Essef (France),
h. European Measuring Directives (MID) recognized lab,
i. Japan Electric Meters Inspection Corporation (Japan)
The type test certificates shall be submitted in complete form as furnished by the testing
authority. Incomplete type test certificates or part of certificates will not be considered. The
tenderer shall also submit the Type Test reference number and contact person from the
independent laboratory for the purpose of verification, if required by the Purchaser.