Professional Documents
Culture Documents
You can find out about our cookies and how to disable cookies in our Privacy
Policy. If you continue to use this website without disabling cookies, we will assume you are happy to receive them. Close.
Barrel vault.
Braced frame.
Conoid shell.
Cool roofs.
Domestic roofs.
Dormer window.
Contents
1 Introduction
2 Materials
3 Roof forms
3.1 Portal frame
3.2 Pitched truss
3.3 Saw-tooth roof
3.4 Trussed rafter
3.5 Space deck
3.6 Space frame
3.7 Fabric structures
3.8 Monitor roofs
3.9 Long span arch
3.10 Suspension structures
3.11 Cable stayed structures
4 Related articles on Designing Buildings Wiki
5 External references
Introduction
Long span roofs are generally defined as those that exceed 12 m in span. Long span roofs can
create flexible, column-free internal spaces and can reduce substructure costs and
construction times. They are commonly found in a wide range of building types such as
factories, warehouses, agricultural buildings, hangars, large shops, public halls, gymnasiums
and arenas.
Their primary functions are, similar to normal roofs, typically, protecting against the weather,
restricting the spread of fire, providing sound and thermal insulation and so on. However, as
they may offer the only structural system other than the perimeter walls, they may also have to Featured articles and news
provide support for building services, access routes, lifting equipment, lighting, and so on.
Heritage value
Materials
Long span roofs can be fabricated in from a number of materials, such as steel, aluminium
alloy, timber, reinforced concrete and prestressed concrete. Steel is often preferred due to its
high strength and because it will not spread fire over its surface. The design of long span steel
and (steel-concrete) composite beams is generally carried out in accordance with BS 5950, BS The theory and evaluation concealed within
EN 1993 or BS EN 1994. professional judgment.
Portal frame
Portal frames are a type of structural frame, that, in their simplest form, are characterised by a
beam (or rafter) supported at either end by columns, however, the joints between the beam
and columns are 'rigid' so that the bending moment in the beam is transferred to the columns.
This means that the beam can be reduced in sectional size and can span large distances.
Typically, the joint between the beam and the columns is made 'rigid' by the addition of a
haunch, bracket, or by a deepening of the section at the joints. Portal frames are generally
fabricated from steel, reinforced precast concrete, or laminated timber sometimes referred to
as 'glulam'.
Pitched trusses are triangulated plane frames spaced at suitable centres. To prevent
spreading, the rafters, which form the top edge of the truss are connected at their feet by a tie
member. Bracing is provided within the basic triangle by using struts and ties. Purlins are fixed
between the trusses to which roof coverings can be attached.
Pitched trusses allow for good rainwater run off, reasonable daylight spreads from rooflights,
Follow one of our step-by-step project plans.
and high roof volume due to the triangulated format.
They are often made from steel sections, connected together with bolts or by welding to
Most read news
shaped plates called gussets. Steel truss members are usually angle sections since they are
economic and accept both tensile and compressive stresses. Alternatively, timber members
may be used, joined with bolts and timber connectors.
Saw-tooth roof
They were historically used in industrial and manufacturing buildings before electric light was
introduced and when daylight strategies were essential. Although these went into decline with
the advent of artificial lighting, architects and designers have begun to reintroduce them
because of their environmental efficiency and the fact that their shape offers good potential for
solar panel installation.
Trussed rafter
Trussed rafters can be designed for very long spans, ranging from 15-45 m. They are usually
fabricated from timber or steel, and are spaced at suitable centres to carry purlins. They
typically have a low pitch to give acceptable rainwater run off and can give reasonable daylight
spread from rooflights. While they have the advantage of reducing roof volume, the depth, and
hence volume, increases with the span.
Space deck
Infrastructure
This is a modular structural roofing system based on a simple pyramidal unit typically
A detailed look at ICE’s new programme.
fabricated using tubular diagonals welded to a forming tray and apex boss. Single span
designs can provide large clear spans of up to 22 m, while two-way span designs can provide
up to 33 m. Documentation
The component parts can be easily transported to site and assembled into beams, the whole
space deck being constructed at ground level before being hoisted into position on top of
perimeter supports. Any lightweight structural decking is appropriate as a roof covering.
Rooflights can also be mounted directly onto the square top space deck units.
Space frame
Buckminster Fuller pioneered the use of space frames in the 1960s for his geodesic dome
structures.
Fabric structures
Architectural fabrics such as PTFE glass and PVC polyester are extremely strong in tension,
and can span very large areas with the minimum of material. They can be pushed into tension
by supporting structures, pulled by structural cables, or inflated by air pressure. They are
generally translucent, and so provide good natural daylight.
See The history of fabric structures for more information. Value management, engineering and analysis.
Long span arches are entirely self-supporting, with no trusses, frames, support posts, or
purlins. They are also known as shell roofs. They are a structural curved skin covering a given
plan shape and area where the forces in the shell or membrane are compressive and in the
restraining edge beams are tensile.
Suspended structures are those where the main elements that support the load, such as wires,
See more features and news.
cables, chains, and so on, are subject only to extension forces. Plane (horizontal) structures
use a wire fastened to supports from which are suspended elements that take the local stress.
These are used mainly in bridges and roofs.
Cable stayed structures
This is a structural system derived from bridge building, where a flat roof structure is supported
from above by steel cables radiating downward from masts that rise above roof level. The
cables behave as simple suspension elements, while the roof structure behaves like a normal
load-resisting unit, subject to moments, shears and other kinds of action effect. Even under
wind uplift, due to the dead weight of the roof, it is expected that the suspending elements
remain in tension.
Arches.
Barrel vault.
Braced frame.
Conoid shell.
Concrete-steel composite structures.
Cool roofs.
Domestic roofs.
Dormer window.
Failure of cast iron beams.
Flat roof.
Flat roof defects.
Geodesic dome.
Green roofs.
Guidance for construction quality management professionals: Structural Steelwork.
Hyperbolic paraboloid.
Major cast metal components.
Megastructure.
Metal roofing.
Pitched roof.
Portal frame.
Prestressed concrete.
Shell roof.
Structural steelwork.
Rafter.
Roofing defects.
Tensile structures.
Tension cable and rod connectors.
The development of structural membranes.
The history of fabric structures.
Truss.
Types of frame.
Types of roof.
External references
'Building Construction Handbook' (6th ed.), CHUDLEY, R., GREENO, R., Butterworth-
Heinemann (2007)