Professional Documents
Culture Documents
111821 DL(S1&S3)
111870 CSFB-S1
112033 (retested and PASS) 6/27/2020
111673 (retested and PASS) 6/28/2020
111890 UL S3??
112243 All Dl and Ping time are failed, Moblity Dl and UL failed,
112244 All sector dl, ul sector 1, attach detach s2 missed
111162 DL incomplete
111050 DL incomplete
111683 repeat all tests (missing logs and failures on all tests)
112209 Mobility_ul missed, Dl & Ul for lla sec failed, CSFb c2 and s3
112167 retest
112258 retest
112148 retest
Detach time and Erab setup time are not checked for all secrors
The lat long is not wright,so it is diffcult to check mobility test
sec3 of SHC & attach dettach log file is missed
DL sec1 and sec2 max throughput failed
call duration of each sector is not 30 sec
feeder cross, C1&2_ping 32 done 21 time and other 20 times, PCI0 is detected
Detach time and Erab setup time are not checked for all secrors
Attach and detach sec1 is not locked
ping 32 sec1 is not locked and all ping tests of all sectors are done 20 times
UL&DL sec1 are not locked
DL sec1 max and average throughput failed
DL sec3 max throughput failed
almost one third of the serving cell is PCI 0
C2_DL throughput and C3_Dl transfer below thr.
MOC_C2 locked with other PCI,attach/detach did not follow testmethodlogy,
UL/DL logfiles missed PCI0 serving high.
All Ping test 20 times,PCI0 serves more, DL test did not follow test methodlogy.
C1_dl 3 times ps transfer, C2_DL throughput below thr.DL and UL _mobility file
size 2GB, high serving PCI0, MOC_c2
PING test fail,App throughput C1&2_UL belwo thr. DL test did not follow test
procedure. DL mobility throughput below thr.PCI0 serves also high
64QAM is not enabled
SHC all sectors are not done 5 times
detach time and erab set up timeis above target for all sectors
all ping tests for all sectors are done 20 times
DL stationary test for all sectors is not done in the right methodology
almost one third of the serving cell is PCI 0
Ping test is done 20 times, C2_moc twice, All DL KPI's faill. PCI0 serves high
DL test did not follow test methodology, ping done 20 times,High serving PCI0
for all tests,
C2_CSFB success rate below thr, all ping and DL test did not follow
testmethodology. PCI0 serves more percentage.
C1_RRC success rate belwo thr. Ping test is done 20 times, DL && C1_moc did
not follow test methodlogy,
Incompleted log file
Incompleted log file
No DL mobility log file
there is RRC completion failure in att det sec2
detach time is above target for all sectors
all ping tests for all sectors are done 20 times
DL stationary test for all sectors is not done in the right methodology
Incomplete logfile
ping test done 20 times, No log file for C1_ul and All DL.
No mobility log file and UL sec3
SHC sec2 is not locked
detach time and erab set up timeis above target for all sectors
all ping tests for all sectors are done 20 times
UL sec1 average throughput failed
DL stationary test for all sectors is not done in the right methodology
almost one third of the serving cell is PCI 0
Ps attach time is below thr for all sectors, Ping test has been done 20 times, Moc
didn’t follow test procedure.NO log file for all mobility and DL, UL .
ping test is done 20 times,Dl test didn’t follow test method.
C2_only 4 CSFB successful
Detach time and Erab setup time are not checked for all secrors
all ping tests(both pin32 and ping 1460) are done 20 times
almost one third of the serving cell is PCI 0
The lat long is not wright,so its diffcult to cjheck mobility test
SHC sec1,attach detach sec1 and ping 1460 sec1 are not locked
attach time is above target for sec2
Detach time and erab setup time for all sectors are above target for all sectors
ping test is done 20 times for all sectors
there is transfer failure in UL sec2
UL sec1 and UL sec2 average throughput failed
almost one third of the serving cell is PCI 0
DL all sectors test is not done in the right methodology
Detach time and Erab setup time are not checked for all secrors
SHC sec2 is done 4 times
4 attach failure in all 3 sectors
No latency result for ping32&1460 in sec1 and sec2 and done 5 times in sec3
max and average throughput of DLsec1 and sec3 failed
almost one third of the serving cell is PCI 0
DL stationary test for all sectors is not done in the right methodology
Detach time and Erab setup time are not checked for all secrors
Both ping32 and 1460 are done 20 times for all sectors
DL throughput of all sectors failed
almost one third of the serving cell is PCI 0
DL_App throughput&& data transfer below thr, Ul_mobility file size,MOC_C2 for
PCI_408 not done.Ping wrong testmethod, PCI0 has more sample
DL mobility average throughput failed
SHC sec1,att det sec1&sec2 are not locked
DL stationary test for all sectors is not done in the right methodology
almost one third of the serving cell is PCI 0
Logfiles missed
The site azimuth should be checked and the PCI s are not mapped to each
respective sectors
sec2 is not served in UL mobility test
DL mob average throughput failed
Detach time and erab setup time for all sectors are above target for all sectors
SHC sec2 is not locked
SHC all sectors are not done 5 times
ping test is done 20 times for all sectors
almost one third of the serving cell is PCI 0
DL all sectors test is not done in the right methodology
Mobility test and Stationary sec1 all test items log files are missed
There is PS session drop in DL sec3
The file size for DL is 2GB
call duration of each sector is not 30 sec
The site has feeder cross and after fixing cross mobility test should be retested
all sec2 tests are not locked
UL sec3 is not locked
ping sec2 is done 9 times
Detach time and erab setup time for all sectors are above target for all sectors
almost one third of the serving cell is PCI 0
DL all sectors test is not done in the right methodology
Detach time and Erab setup time are not checked for all secrors
DL all sectors max and average throughput failed
DL sec1 and sec3 done one time and DL sec2 2 times
almost one third of the serving cell is PCI 0
DL stationary test for all sectors is not done in the right methodology
C1_attach/detach fail, ALL_ping RTT time above thr. DL dinot follow the test
methodology.DL mobility below thr. PCI0 serves.
Ping test 20 times,C1_RRC success rate and C2_ detach success rate belwo
thr. All mobility test fail. AL Dl test did not follow test methodlogy,
C2&3 RRC and detach success rate below thr. Sites cover less in IDLE, all
mobility KPI fail, PCI 0 has more serving for all test
PCI0 has high serving, C3_RRC success rate below thr. All Dl KPI's fail,
C2_moc log is locked with wrong PSC-=C1, Throughput below thr. For all DL,
feeder cross,C1_Ping 32 done 21 times, other ping test 20 times,all call test
done 3 times, C1_RRC and attach success rate below thr, PCI 0 has more
serving for all test
C1 all KPI's missed, all KPI's results below thr.
C1_UL and ALL DL throughput below thr. C1&2 MOC test wrong methodlogy.
C2&3 CSFB time is above thr. Ping_RTT/attach/UL fail,totally all KPI's fail
CSFB calls and PING test did not follow test procedure, C3_UL below thr. DL
KPI's fail. PCI0 serves for all test
DL_App throughput&& data transfer below thr, DL&&Ul_mobility file size,.Ping
wrong testmethod, RRC success rate for C1&2 below thr. PCI0 has more
sample
C1&3_UL App throughput below thr.ping all_20times, C2_high attach time,High
serving PCI0 for all tests,
DL mobility has no log file
SHC sec1 is done 4 times where as sec2 and sec3 are done 4 times
all ping tests of all sectors are done 20 times
UL sec1 max and average throughput failed
DL stationary test for all sectors is not done in the right methodology
almost one third of the serving cell is PCI 0
C3_MOC done 3 times. C1_UL throughput below thr,ping test done 20 times,DL
kPI's fail,
C3_UL PS transfer one time, ping 20 times,Dl wrong test methodology,
feedercross.
C1_DL file transfer 3 times, ERAB set up time not cheked
All UL transfer one time, C2_ping done 21 times, all mobility KPI's missed, DL
test did not follow test methodology.PCI0 has high serving
feeder cross,PCI145_ping not done,MOC_test did not follow test
methodology,PCI0 has high serving
DL mobility average throughput failed
SHC sec3 is done 4 times where as sec1 and sec2 are done 3 times
Both ping32 and 1460 are done 20 times for all sectors
DL stationary test for all sectors is not done in the right methodology
almost one third of the serving cell is PCI 0
DL mobility average throughput failed
there is transfer failure in UL sec2 and UL sec3
DL stationary test for all sectors is not done in the right methodology
almost one third of the serving cell is PCI 0
Ping_1460 fail,no logfile for DL tests.
In idle test the sectors are not served in their respective regions
UL & DL mobility average throughput failed
attach time for sec2&sec3 is above target and detach time for sec1 is above
target
ping 32 sec3 is not locked
all ping tests for all sectors are done more than 10 times
UL sec3 is not locked
UL max and average throughput of all sectors failed
DL stationary test for all sectors is not done in the right methodology
almost one third of the serving cell is PCI 0
MOC_C2&3(PCI 3&4 )did not follow test procedure, C1&2_ping 20 times but
C_3 18 times. DL test did not follow test procedure. PCI 0 serves high.
No mobility log files,ping test done 20 times, C2_UL below thr. PCI0 serves high
sample, DL test is done with wrong procedure
MOC_C2&3 done twice,C3_attach/detach fail, DL didn’t follow test methodlogy,
PCI0 serves high for all test. All ping test done 20 times
All test for PCI 482 (redunndancy of 481 done)& UL mobility didn't done. PCI0
and DL KPIS didn't meet the test procedue.All ping test done 20 times
detach time and erab set up timeis above target for all sectors
all ping tests for all sectors are done 20 times
DL stationary test for all sectors is not done in the right methodology
C3_Dl wrong test methdology, KPI's formula for PS Session termination success
rate, Detach time,ERAB set up time cannt be identified
sec2 is not served in its direction in all mobility test
SHC,att detach and UL of sec2 are not locked
detach time and erab set up timeis above target for all sectors
No log file for ping 32 sec2
DL stationary test for all sectors is not done in the right methodology
almost one third of the serving cell is PCI 0
CSFB calls and PING test did not follow test procedure, C2&3_UL below thr. Dl
log ifles missed, PCI0 serves for all test
Ping C1_1460 fail,DL KPIS fail
Incompleted log file
Incompleted log file
#N/A
No mobility log file
SHC all sectors test is not done 5 times
attach detach is not done for all sectors
ping test is done 20 times for all sectors
almost one third of the serving cell is PCI 0
DL all sectors test is not done in the right methodology
#N/A
256QAM is activated during test
call duration is not 30 sec
DL all sectors max and average throughput failed
Dawit Getu
6/3/2020 Beakal A
Mathewos Debasu
Mathewos Debasu
Dawit Getu
5/28/2020 Beakal Abebayehu Mathewos Debasu
6/13/2020 Beakal Abebayehu
Dawit Getu
6/13/2020 Beakal Abebayehu
Dawit Getu
6/2/2020 Beakal Abebayehu
Dawit Getu
6/15/2020 Beakal A
Mathewos Debasu
Demelash Desalegn
6/16/2020 Teressa Debisa Demelash Desalegn
6/11/2020 Teressa Debisa
Demelash Desalegn
6/13/2020 Teressa Debisa
Demelash Desalegn
6/15/2020 Teressa Debisa
Abraham Legesse
6/11/2020 Teressa Debisa Demelash Desalegn
6/16/2020 Teressa Debisa Demelash Desalegn
Abraham Legesse
6/11/2020 Teressa Debisa
Abraham Legesse
Demelash Desalegn
6/13/2020 Teressa Debisa Demelash Desalegn
Demelash Desalegn
6/2/2020 Amanuel Ameha
Gebreabezgi G/Medhin
6/14/2020 Teressa Debisa
Demelash Desalegn
6/14/2020 Teressa Debisa Demelash Desalegn
Abraham Legesse
Demelash Desalegn
6/15/2020 Taresa Debesa
Abraham Legesse
6/16/2020 Teressa Debisa Demelash Desalegn
5/28/2020 Amanuel Ameha Gebreabezgi G/Medhin
Gebreabezgi G/Medhin
6/1/2020 Amanuel Ameha Gebreabezgi G/Medhin
T/giorgis Mandefro
6/2/2020 Messay Mekonin
Getahun Mengesha
Getahun Mengesha
T/giorgis Mandefro
Gebreabezgi G/Medhin
T/giorgis Mandefro
Gebreabezgi G/Medhin
Gebreabezgi G/Medhin
6/13/2020 Amanuel Ameha
Gebreabezgi G/Medhin
Gebreabezgi G/Medhin
5/28/2020 Amanuel Ameha Gebreabezgi G/Medhin
Gebreabezgi G/Medhin
6/16/2020 Fanuel Seyoum Getahun Mengesha
Getahun Mengesha
Yismaw Kere
6/11/2020 Tekele Alem
T/giorgis Mandefro
6/11/2020 Melaku Kabite
Demelash Desalegn
#N/A
Getahun Mengesha
6/12/2020 Tekele Alem
T/giorgis Mandefro
6/12/2020 Melaku Kabite Demelash Desalegn
Getahun Mengesha
Getahun Mengesha
Demelash Desalegn
Gebreabezgi G/Medhin
6/1/2020 Melaku Kabite
Gebreabezgi G/Medhin
6/16/2020 Melaku Kabite
Demelash Desalegn
Demelash Desalegn
Demelash Desalegn
Demelash Desalegn
6/14/2020 Melaku Kabite
Demelash Desalegn
6/16/2020 Melaku Kabite
Gebreabezgi G/Medhin
6/1/2020 Melaku Kabite
Gebreabezgi G/Medhin
6/17/2020 Melaku Kabite
Demelash Desalegn
6/11/2020 Melaku Kabite
Demelash Desalegn
#N/A Melaku kebite
G/abezgi G/Medhin
6/23/2020 Melaku kebite
G/abezgi G/Medhin
Yismaw Kere
Yismaw Kere
Yismaw Kere
Getahun Mengesha
Yismaw Kere
6/15/2020 Biniyam Tadesse
Yismaw Kere
6/15/2020 Biniyam Tadesse
Yismaw Kere
6/15/2020 Fanuel Seyoum Getahun Mengesha
Demelash Desalegn
T/giorgis Mandefro
T/giorgis Mandefro
5/30/2020 Amanuel Ameha
Gebreabezgi G/Medhin
T/giorgis Mandefro
Getahun Mengesha
6/15/2020 Fanuel Seyoum
Getahun Mengesha
Gebreabezgi G/Medhin
Gebreabezgi G/Medhin
#N/A Fanuel Seyoum Getahun Mengesha
Getahun Mengesha
#N/A Fanuel Seyoum Getahun Mengesha
1162
1578 C1
111050 111050
111874 111874
111881 111881
111890 111890
112037 112037
112082 112082
112091 112091
112126 112126
112132 112132
112144 112144
112151 112151
112152 112152
112173 112173
112188 112188
112229 112229
112230 112230
113002 113002
Comment
4T4R (BBU+RRU+Ant)
no logfile
4T4R (BBU+RRU+Ant)
no logfile
4T4R (BBU+RRU+Ant)
no logfile
4T4R (BBU+RRU+Ant)