You are on page 1of 2

72 Business Park,

DESIGN Ground floor,


Industry & Facilities APPRAISAL Marol Industrial Area, Opposite
Seepz Gate No. 2.
Division DOCUMENT MIDC Cross Road "C",
Andheri - (East) Mumbai-400 093.
tc.mumbai@in.bureauveritas.com
DAD Ref: IND.M.4.18.0187-1-TC Issue No.: 02 Date: 03rd December 2018

TOTAL SOLUTIONS LTD., EGYPT


DESIGN APPRAISAL OF CONE ROOF TANK - 500BBL.
(3.81 M DIA X 7 M HT)

The documents, listed in Table-A, have been appraised where appropriate to:
 API 650 12th Edition 2013, Addendum 2.

for the design condition specified in the Design referred and subject to the comments specified
below, have been assigned the status as indicated in Table - A.

COMMENTS:

I. All the Comments are resolved suitably as per email dated 22.11.18 from M/s. Total
Solutions, There are no further comments.
II. Shell plate width is less than 1800 mm is accepted by Client as per CRS dated 29.08.18
III. The Design calculation is appraised based on independent calculations carried out by
Bureau Veritas India Pvt. Ltd.

IV. The appraisal is subject to following:


A. Satisfactory manufacturing & testing to the requirement of the code and to the satisfaction
of attending surveyor.
B. Adherence to statutory regulations if any, applicable to the end user’s country of origin.
C. Manufacturer would satisfy himself about the adequacy of the equipment for any other
loading in addition to that mentioned in the drawing, if any.

Appraised by Signature

Kasim SHAIKH

TC-DR/Rev1.3rd Jan 2018 Page 1 of 2

This document is issued within conditions of services of Bureau Veritas India Pvt. Ltd.
72 Business Park,
DESIGN Ground floor,
Industry & Facilities APPRAISAL Marol Industrial Area, Opposite
Seepz Gate No. 2.
Division DOCUMENT MIDC Cross Road "C",
Andheri - (East) Mumbai-400 093.
tc.mumbai@in.bureauveritas.com
DAD Ref: IND.M.4.18.0187-1-TC Issue No.: 02 Date: 03rd December 2018

Table – A

Sr. Document no. Description Rev. Status Appraisal


no. no. code Date
TS01-061-2017-GA1
1 Drawing List 10 IN 03/12/18
Sht 1/8A
TS01-061-2017-GA1
2 General Notes 6 VI 03/12/18
Sht 1/8B
TS01-061-2017-GA1
3 General Arrangements 9 VI 03/12/18
Sht 1/8C
TS01-061-2017-GA1
4 Tank Manhole MH01 10 VI 03/12/18
Sht 1/8D
TS01-061-2017-GA1
5 Tank Manhole MH02 8 VI 03/12/18
Sht 1/8E
TS01-061-2017-GA2
6 General Arrangement 10 VI 03/12/18
Sht 2/8
TS01-061-2017-SP1
7 Details 5 IN 03/12/18
Sht 3/8
TS01-061-2017-SP2
8 Details 4 VI 03/12/18
Sht 4/8
TS01-061-2017-SP3
9 Details 6 VI 03/12/18
Sht 5/8
TS01-061-2017-SP4
10 Name Plate & Welding Details 4 IN 03/12/18
Sht 6/8
TS01-061-2017-GA1
11 Sections 4 IN 03/12/18
Sht 7/8
TS01-061-2017-GA1
12 RF Pad Calculations 0 IN 03/12/18
Sht 8/8
13 RFG-TS-158-2014 API 650 calculation Sheet 6 VI 03/12/18

VI : Appraised VC : Appraised with Comments IN : For Information


SP : Status Pending RE : Replaced NR : Not Relevant

Appraised by Signature

Kasim SHAIKH

TC-DR/Rev1.3rd Jan 2018 Page 2 of 2

This document is issued within conditions of services of Bureau Veritas India Pvt. Ltd.

You might also like