Professional Documents
Culture Documents
- DET-ICE, 1 (1DD1)
- wiring from pin 2 of the circuit breaker (2DD1) to pin 1 of the ice detector 1 (1DD1)
- wiring from pin 4 of the ice detector 1 (1DD1) to pin 12B of the FWC 1 (1WW1)
- wiring from pin 4 of the ice detector 1 (1DD1) to pin 12B of the FWC 2 (1WW2)
- wiring from pin 4 of the ice detector 1 (1DD1) to pin 12J of the CMC 1 (1TM1)
- wiring from pin 4 of the ice detector 1 (1DD1) to pin 12J of the CMC 2 (1TM2)
A. Referenced Information
REFERENCE DESIGNATION
Ref. AMM 30-81-00-710-80 Operational Test of the Ice Detection System
1
Ref. ASM 30-81-01
Ref. AMM 30-81-31-000-80 Removal of the Ice Detector
1
Ref. AMM 30-81-31-400-80 Installation of the Ice Detector
1
3. Fault Confirmation
SUBTASK 30-81-00-860-054-A
A. Job Set-up
Get access to the avionics compartment.
SUBTASK 30-81-00-710-054-A
B. Test
(1) Do the operational test of the ice detection system 1 Ref. AMM 30-81-00-710-801.
4. Fault Isolation
SUBTASK 30-81-00-810-052-A
A. If the test gives the maintenance message ID1 (1DD1):
(1) Make sure that there is 115VAC at pin 1 of the ice detector 1 (1DD1) Ref. ASM 30-
81-01.
(b) If there is no 115VAC, do a check of the wiring from pin 2 of the circuit brea
ker (2DD1) to pin 1 of the ice detector 1 (1DD1).
- wiring from pin 4 of the ice detector 1 (1DD1) to pin 12B of the
FWC 1 (1WW1)
- wiring from pin 4 of the ice detector 1 (1DD1) to pin 12B of the
FWC 2 (1WW2).
SUBTASK 30-81-00-710-055-A
B. Do the test given in Para. 3.B.
5. Close-up
SUBTASK 30-81-00-860-055-A
A. Close Access