Professional Documents
Culture Documents
1. Determine average hourly production of a CAT D7R power shift dozer is used in a
pushing operation. The dozer is equipped with a straight Universal blade. The material is
dry and non-cohesive silty sand that weighs 2800 lb/lcy in the loose state. The center of
mass to center of mass pushing is 200 ft uphill on a 5% grade. The operator is excellent
and will be performing in good conditions. The job efficiency is assumed to be a 50
minute hour.
2. For each of the stated conditions determine the probable production expressed in cubic
yards per hour bank measure for an excavator equipped with a 3-cy bucket. The
excavator has a maximum digging depth of 11 ft. Use a30-min-hour efficiency factor.
Prepared by Samson