Professional Documents
Culture Documents
TDC-723-Rev-0-IS-2062-2011-E250 C - Domestic
TDC-723-Rev-0-IS-2062-2011-E250 C - Domestic
REVISION STATUS
Contents
1. Material: ..................................................................................................................................................... 4
1. Material:
STEEL STRUCTURAL PLATE
3. Supply condition
THICKNESS CONDITION
Killed
Vacuum degassed
Thickness >= 40 mm Furnace normalized
100% ultrasonically tested as per ASTM-A578 level B and
EN-10160-S2.
4. Mechanical properties:
250 for Thickness < 20mm
Yield strength
240 for 20mm ≤ Thickness ≤ 40mm
( minimum in MPa)
230 for Thickness > 40 mm
%C 0.22 Max
% Mn 1.50 Max
%S 0.040 Max
%P 0.040 Max
6. Dimensional tolerances:
Thickness -0 /+ 5% of thickness ordered
Width - 0 /+ 35 mm
Length - 0 /+ 40 mm Max
7. Testing frequency:
2 Samples each per Heat for Tensile and Bend Test (Sample in Transverse direction for thickness > 12
mm)
1 Sample per Heat for Impact Test.
8. Ultrasonic inspection:
As per ASTM A 578 L-B and EN-10160-S2 (Thickness > =10mm)
14. Marking:
Hard Punching as per IS: 2062 -2011 or Applicable code