You are on page 1of 3

SESSION-4 MCQ

1. It is a very high-gain differential amplifier with very high input impedance and very
low output impedance.

a) par-amp

b) op-amp

c) differential amp

d) complementary amp

2. A good op-amp has a

a) very high input resistance


b) very low input resistance
c) very high output resistance
d) very low CMRR

3. Find the value of capacitor, if the rate of change of voltage across the capacitor is
0.78V/µs and current= 12µA.
a) 5µF
b) 2µF
c) 10µF
d) 15µF

4. For the circuit shown below, calculate the rate of change of output signal
a) Vm ωcosωt
b) Vm cosωt
c) Vm cosωt/ωt
d) Vm cosωt/ω

5. At what condition, the output of op-amp will be free of distortion?


a) Slew rate > 2πfVm /106 V/µs
b) Slew rate > 2πfVm /106 V/µs
c) Slew rate ≥ 2πfVm /106 V/µs
d) Slew rate = 2πfVm /106 V/µs

6. A practical op-amp has very _____ input impedance, very _____ output impedance,
very _____ open-loop voltage gain, and a _____ bandwidth.

a) high, low, high, wide


b) high, high, low, narrow
c) low, high, high, wide
d) low, low, low, wide

7. Rise time is specified for


a) Large signal
b) Medium signal
c) Small signal
d) All of the mentioned

8. Slew rate is defined as the rate of change of


a) Output voltage with respect to time
b) Input voltage with respect to time
c) Both output input voltage with respect to time
d) None of the mentioned

9. Op-amps with wide bandwidth will have


a) Increase in output
b) Higher slew rate
c) Low response time
d) None of the mentioned
10. How the slew rate is represented?
a) 1V/ms
b) 1V/s
c) 1V/µs
d) 1mv/S

Answers

1. b

2. a

3. d

4. a

5. b

6. a

7. c

8. a

9. b

10.c

You might also like