Professional Documents
Culture Documents
LIGHTING POINTS
1.01 Lighting points wired in 1.5 mm2 SC CU cables
drawn in concealed 20mm diameter HG P.V.C
conduits for:-
a) one way switching 3 No.
SWITCHES
1.02 10Amps, switch plate as CLIPSAL or approved
equivalent as
a) one gang one way 1 No.
LIGHTING FITTINGS
1.03 Lighting fittings complete with bulbs or tubes as
follows:-
a) 1200mm Single SmartBright LED Batten
fitting complete with 18 watts Essential LED tube 2 No.
(TYPE A) as PHILIPS or approved equivalent
a) twin. 2 No.
1.07
20 Amps double pole switches with neon indicator
as CLIPSAL or approved equivalent for manifold 3 No.
1
PROPOSED PLANT ROOM
Item Description
Qty Unit Rate (Ksh) Amount (Ksh)
Supply, install, test and commission the following
;-
Sub Total B/F From PREVIOUS PAGE
CONSUMER UNIT
1.08 6 ways SP&N, flush mounted Consumer unit
complete with 100A integral isolator as HAGER or
1 No.
approved equivalent complete with all accessories
but excluding MCBs.
1.09 MCB’s for item above
(a) 10A, SP 1 No.
(b) 20A, SP 3 No.
(c) Blanking plates 2 No.
EARTHING.
1.12 Earthing of the building, comprising of the
following:-
a) 15 mm x 1800 mm earth rod as FURSE cat. No.
RB 105. 1 No.
b) 15 mm dia. Driving stud as FURSE cat.No.
ST100. 1 No.
c) Concrete inspection pit as FURSE cat.
No.PT005. (or a well made 320mm x 320mmx
210 mm depth pit.) 1 No.
e) 25x3mm copper tape 10 LM