Professional Documents
Culture Documents
DEPARTMENT: DATE:
SIGNATURE
MANAGER:
:
DATE OF INSPECTION
MML /
Cage Max no of
Location of Cage Rated
No: persons:
capacity
1 WELDS
1.1 Inspect all welds for signs of
wear, cracks
1.2 Are all sides closed to
prevent tools falling off the
cage?
2 SAFETY LATCH
2.1 Inspect the safety latch on
the door of cage.
2.2 Inspect the safety bar
inserted at rear of cage
2.3 Ensure the split pin on safety
bar is in place.
3 GENERAL
3.1 Check for damage.
3.2 Ensure the cage is used for
personnel only.
3.3 No materials to be lifted inside the
cage.
3.4 Is the rated capacity marked on
the side of the cage?
3.5 Are the employees inside the cage
harnessed to the frame. (Safety Belt)
3.6 Is the hook attachment on the
telescopic handler showing signs of
wear?
SIGNATURE :
Cag
e Remedial Action By Whom Action Date
No: