Professional Documents
Culture Documents
Electrical Engineering Department: Practical Work (PW)
Electrical Engineering Department: Practical Work (PW)
SESSION
CODE &COURSE DET10013 – ELECTRICAL TECHNOLOGY
TITTLE OHM’S LAW
CLASS
GROUP NUMBER
DATE
Marks
Matrix Generic
Name of Student Report Skills
Number Total Skills
(A) (B)
1.
2.
3.
4.
Lecturer Name
Date of Submission:
Comments
RESULT:
Table 1.1
R1 = 100Ω
Current, I (mA)
Current, I (mA)
Voltage, V (Volt) Measured Value
Calculated Value
(Tinkercad)
0
2
4
6
8
10
Table 1.2
R2 = 300Ω
Current, I (mA)
Current, I (µA)
Voltage, V (Volt) Measured Value
Calculated Value
(Tinkercad)
0
2
4
6
8
10
2. What happen to the value of current as the value of voltage is increased? (2 marks)
3. Compare the value of current obtained in Table 1.1 with the value in Table 2.2. As the value
of resistor increased (from 100 Ω to 300 Ω), what is your observation about the value of
current? (2 marks)
4. When the resistor is unchanged (value of resistor is the same), as voltage increased, the
current _______________. (2 marks)
5. When the voltage is unchanged (the value of voltage is the same), as resistance increased,
the current ______________. (2 marks)
CONCLUSION: (5 marks)
Write a conclusion based on your work in this practical session.