Professional Documents
Culture Documents
SEMINAR
ON
SUBMITTED TO
DEPARTMENT OF MECHANICAL ENGINEERING
SCHOOL OF ENGINEERING
MOSHOOD ABIOLA POLYTECHNIC ABEOKUTA OGUN STATE
OCTOBER, 2021
i
CERTIFICATION
This is to certify that the project work was carried out by OLALEYE YUSUF AMUDA, with
Engineering. Moshood Abiola Polytechnic, Ojere, Abeokuta, Ogun State in partial fulfillment of
the requirements for the award of National Diploma (ND) in Mechanical Engineering.
ii
DEDICATION
We dedicate this project to Almighty God for his mercy, guidance, and protection over our lives
and my awesome parents for their love and supports. God will continue to bless them and
iii
ACKNOWLEDGEMENTS
All praise and adoration are due to Almighty God who has retained me on this earth as a Muslim,
More importantly, I whole heartedly appreciate the contribution of my loving amiable and
erudite supervisor, ENGR. J.G OLIYIDE for his constructive guidance, He has really enriched
and broadened my knowledge in the field of research. I wish you God’s guidance and blessing in
More thanks goes to my beloved parent Mr. and Mrs. OLALEYE for their love and blessings
I also acknowledge the Department of Mechanical Engineering in the School of Engineering for
iv
ABSTRACT
This work is on foot step power generation using piezoelectric sensor. In this foot
step power generation project is designed to convert foot step, walking and running
energy into electrical energy. It is used to generate electricity from by walking or running
on foot step. The demand of electrical energy is increasing day by day. But power
generation conventional resources are now not enough for total demand of electrical
ways of electrical power generation. Foot step power generation system is also a non-
footsteps into electrical energy by using transducers. It can be implemented on roads, bus
stations and many public places. Foot step power generation system basically converts
force energy of foot into electrical energy by using piezoelectric sensor. Piezoelectric
v
TABLE OF CONTENT
Title Page i
Certification ii
Dedication iii
Acknowledgement iv
Abstract v
Table of Content vi - vii
CHAPTER ONE
INTRODUCTION
1.1 Background to the Study 1-2
1.2 Problem Statement 2
1.3 Aims And Objective Of The Study 2–3
1.4 Justification of the Study 3
1.5 Scope of the Project 3
1.6 Limitation Of The Project 4
CHAPTER TWO
LITERATURE REVIEW
2.1 Introduction 5
2.2 Existing System 5
2.2.1 NTT’s Electricity Generating Shoe 5–6
2.2.2 “Nano Power” Shoes 6
2.2.3 Motion on Dance Floor Generates Green Electricity 6
2.2.4 Generate Power using Footsteps by a Spring Mechanism 6
2.2.5 Streetlights Powered by Sidewalks 6
vi
CHAPTER THREE
RESEARH METHODOLOGY
CHAPTER FOUR
CONCLUSION AND RECOMMENDATIONS
4.1 Conclusion 12
References
vii