Professional Documents
Culture Documents
PURPOSE:
This procedure defines the method for Control ( FIFO ) First IN and First Out .
.
SCOPE:
This is applicable to the:
Incoming Raw Material
FG
RESPONSIBILITY:
The overall responsibility for the effectiveness of this procedure lies with:
Head of Department - Store ,Production ,IQC and
Dispatch Incharge
FLOW CHART
* FIFO (RAW MATERIAL) Page no.-2
* FIFO (FG) Page no.-4
.
HOD-Store
Unload the material from vehicle with
MTPPL/WI/STR/01 follow WI of Material Handling
(WI of material Handling)
HOD-Store
IQC Engineer After material cleared from IQC ,send the Material
. to the storage location
HOD-Store
After Consumption of First lot material Put tag
MTPPL/WI/STR/02
(First Use Me ) on Second lot
WI for FIFO RM
HOD-Store
.Maintaion FIFO Board on Daily basis
MTPPL/WI/STR/02
WI for FIFO RM
.
HOD-Dispatch After Molding and Inspection By Inprocess Quality
Person, Receive FG Material from Production
HOD-Dispatch
MTPPL/WI/STR/02.1
Put Tag (First Use Me ) on First FG Material as
per Stock /FIFO Board
WI for FIFO - FG
HOD-Dispatch
After Dispatch material again put First Use Me
MTPPL/WI/STR/02.1
tag on First FG Pallet
WI for FIFO - FG
HOD-Dispatch
MTPPL/WI/STR/02.1 Maintain FIFO at FG area on Daily Basis as
WI for FIFO - FG above