Professional Documents
Culture Documents
College of Engineering
Submitted by:
Gulifardo,Ezekiel A.
Admitted by:
1. The Rigid Beam is supported by a pin A and wires BD and CE. If the load P on the
4m
3m 2m 2m
7mm
A B C
10mm
δB
δC
Solve for Normal strain at CE
𝛿𝐶
𝑬𝑪 =
𝐿
10𝑚𝑚
𝑬𝑪 =
4000𝑚𝑚
𝑚𝑚
𝑬𝑪 = 2.5 × 10
−3
𝑚𝑚
mm
𝑬 = 2500 × 10−6
𝑪
mm
𝑬𝑪 = 2500 μ𝜀
𝛿𝐶 𝛿𝐵
𝐵𝑦 𝑠𝑖𝑚𝑖𝑙𝑎𝑟 𝑡𝑟𝑖𝑎𝑛𝑔𝑙𝑒: =
7 3
10 𝛿𝐵
=
7 3
10
𝛿𝐵 = ( ) (3)
7
𝛿𝐵 = 4.286 𝑚𝑚
𝛿𝐵
𝑬𝑩 =
𝐿
4.286 𝑚𝑚
𝑬𝑩 =
4000 𝑚𝑚
𝑚𝑚 𝑚𝑚
𝑬 = 1.071 × 10−3 = 1071 × 10−6
𝑩 𝑚𝑚 𝑚𝑚
𝑬𝑩 = 1071 μ𝜀
2. Explain the pressure strain graph dependent on your agreement, give your own model beside the given
model in the video and give an illustration of its application in your day to life
Stress-Strain graphs are additionally used to examine the conduct of a material as from time it is stacked
until it makes back the initial investment however they are determined from effectively quantifiable
amounts and can be plotted against one another.
In view of the chart, the material's unique unreformed, dumped condition is addressed by point 0. The
anxiety on the material develop as it is stacked, and the plot moves from guide 0 toward point A. At the
point when point 0 and point An are dumped it will get back to its unique shape like elastic band, and in the
event that you again examine the district at point 0 and A, anxiety are straightforwardly relative.
In the event that we proceed with the line at point A, the material will presently don't get back to its past
length whenever it has passed. It will be forever distorted here and there. The region past point An is the
thing that we called the plastic locale. At the point when a material is focused on past Point D, non-uniform
misshaping and necking happen, lessening pressure. The material will at long last break when it arrives at
Point E.
b) Plastic Locale – A man slipped his hand and the glass of water tumbled to the floor
c) Fracture Locale – A messed up glass