Professional Documents
Culture Documents
The recommended software combinations are presented in Table 1 and Table 5. The software version of the
graphical user interface (color GUI) is reviewed in Table 4.
The spare parts order codes for chips with latest available software versions are:
Generator Processor PCB: 10010376
Keyboard Processor PCB: 10010375
NOTE! PK, PG and GUI software should be updated at the same time
NOTE! See also PLANMECA PROLINE XC X-RAY UNITGUI SOFTWARE 1.4.3.0.R
PLANMECA PROLINE X-RAY UNIT: SOFTWARE AND PCB COMPABILITY INFORMATION AND ORDER CODES
Order Code 00665070 PM 2002 CC: PM 2002 CC: Proscan (with stepper motor No compatible PCBs
PCB 105-10-06 - PK2.51 order code: 00471087 - PK2.51, order code: 00471087 type ceph lock):
Version –D or later - PG1.69, order code: 00471088 - PG2.07, order code: 00471064 - PK4.54, order code: 00471031
PM 2002 Proline EC/CC: PM 2002 Proline EC/CC Film: - PG4.54, order code: 00471030
- PK3.51, order code: 00471087 - PK3.75, order code: 00471087 Proscan (with solenoid type
- PG1.69. order code: 00471088 - PG2.25, order code: 00471064 ceph lock):
PM 2002 Proline EC/CC Dimax1: - PK4.12, order code: 00471031
- PK3.48, order code: 00471087 - PG4.13, order code: 00471030
- PG3.12, order code: 00471064
Order Code 10002568 No compatible PCBs PM2002 / Proline/ EC/CC/ Film: No compatible PCBs No compatible PCBs
PCB 105-10-06 - PK6.00, order code: 10012715
Version –L or later - PG6.00, order code: 10012716
PM2002/ Proline/ EC/CC/Dimax
2/3:
- PK5.16, order code: 10004422
- PG5.15, order code: 10004421
Order Code 10009419 No compatible PCBs PM2002/ Proline /EC/CC/ Film: No compatible PCBs Proline XC/EC Film:
PCB 105-10-27 - PK6.00, order code: 10012715 - PK6.61, order code: 10011478
- PG6.00, order code: 10012716 - PG6.53, order code: 10011479
PM2002 / Proline /EC/CC/ Dimax Proline XC/EC Dimax 2/3:
2/3: - PK5.62, order code: 10010375
- PK5.16, order code: 10004422 - PG5.60, order code: 10010376
- PG5.15, order code: 10004421
• NOTE! Concerning codes 00471087 and 00471064. When ordering software chips for units equipped with keyboard processor PCB code 105-10-06 Version K or earlier, the required
software version must be given. If the required software is not known then the equipment must be described according to the above table. The spare parts department must be informed
about the X-ray unit model and type (film/digital), sensor type (dimax1/ dimax2 or 3), keyboard processor type and version, generator processor type and version.
• NOTE! Table shows all the possible PCB/ software/machine type combinations. Combinations that are not mentioned in the table are not possible. Planmeca does not guarantee a proper
operation if older software version than the one mentioned in the table is used.