Professional Documents
Culture Documents
STANDARD OPERATING
PROCEDURE
FOR
MOC TEST
Submitted To:
M/S. PRAKRUTI PRODUCTS PVT. LTD.
Submitted By:
KOMAL INDUSTRIES
108, CREATIVE IND.CENTER,
12, N.M.JOSHI MARG,
LOWER PAREL (EAST)
MUMBAI – 400011
E-mail: komal@komalwater.com
Website: www.komalwater.com
• Purpose
➢ The purpose of this sop is to provide a guideline for carrying out the test of stainless steel
(SS 316/SS 316L& SS 304) surface with the molybdenum kit for various material like pipe,
bends, valves, etc.
• Scope
➢ This SOP is applicable for material of construction (MOC) testing of all newly
manufactured equipment’s contact part and non-contact parts in the storage tank, vessel’s &
others.
• Reference
➢ Tunik Electrolyte For Detection of Molybdenum Kit
➢ Hi-Watt (9V Battery)
• Responsibility
➢ Performed & Executed by Komal Industries
➢ Witness by Client
• Procedure of using molybdenum kit:
➢ Put one drop of solution on the clean and dry metal surface to be tasted.
➢ Pass 9v current (-) ve pole on the chemical drop
➢ Remove 9v current from the chemical drop after observing the color change of solution
➢ If the color changes to reddish-brown color and remains for a long time then the tested
metal is SS 316/SS 316Lgrade.
➢ If the color changes to reddish-brown color and disappears immediately, then the tested
metal is SS 304 grade.
➢ Record the observation on the respective material test report.
• Abbreviations:
➢ MOC : Material of Construction
➢ NA : Not Applicable
➢ QA : Quality Assurance
➢ SOP : Standard Operating Procedure