Professional Documents
Culture Documents
Sheet # 6
RC sections under Shear and Flexure (USLS design)
Design according to Code ECP 203/2017 requirements, assume any missing data reasonably.
Materials: Concrete C30 , Steel use Gr. 400 & for stirrups use steel Gr. 240
4br.st.8@150 mm
222 312 ts = 0.10 m
wu = ??
0.60
7.4 m ◦
60
2) For the beam shown in FIG. 2 spaced at 4 m and loaded by working loads (wD = 30 kN/m &
wL = 16 kN/m ) for deflection limit t ≮ L/14 , design the critical sections for flexure and shear,
then draw the rft. details for the longitudinal section and cross sections to scale 1:20
ts=0.1 m
2m 7.4 m 2m
FIG. 2 0.25 m
Beam cross section