Professional Documents
Culture Documents
fm 1
AR91.10-B-3320A.fm Removing and installing backrest and safety belt covering 14.12.99
Cab 693.860
1 Backrest cover
2 Screws
3 Automatic recoiler
4 Hex. head screw
5 Plastic pins
6 Automatic recoiler cover
7 Torx screw
8 Fastening terminal
9 Guide bushing
10 Headrest
11 Hex. nut
12 Support
13 Go-through fastening terminal
B91.10-0004-06
a Removing and installing backrest and safety belt covering AR91.10-B-3320A.fm 2
2 Loosen the plastic pins (5) remove the cover i Insert a suitable tool, (thin screwdriver), in
(6) of safety belt recoiler (3). the plastic pin and remove it.
5 Remove the guide bushings (9) from backrest i Insert a suitable wire to release the retain-
cover (1). ing protrusion from above, at the drive-in
piece opening.
6 Release screw (7) and remove fastening ter- i Installing: Check safety belt for correct
minal (8) from seat. operational stroke.
n BA91.40-B-1003-01B
7 Remove cover (1) from backrest. i Remove the belt from the cut-out part of
backrest cover, above the recoiler (3). Dis-
place the backrest cover upwards pull the free
end of the safety belt.
8 Release the hex. head nut (11) and remove i Installing: The safety belt should not be
the go-through fastening terminal (13). twisted between the recoiler (3) and the go-
through fastening terminal (13).
a Removing and installing backrest and safety belt covering AR91.10-B-3320A.fm 3
n BA91.40-B-1003-01B
9 Release the screw (4) and remove safety belt i Installing: Hook the “T” support of the belt
recoiler (3). recoiler at entrance of the structure on seat.
n BA91.40-B-1006-01B
d Installing::